Identification of SNP and SSR Markers in Finger Millet Using Next Generation Sequencing Technologies

Finger millet is an important cereal crop in eastern Africa and southern India with excellent grain storage quality and unique ability to thrive in extreme environmental conditions. Since negligible attention has been paid to improving this crop to date, the current study used Next Generation Sequencing (NGS) technologies to develop both Simple Sequence Repeat (SSR) and Single Nucleotide Polymorphism (SNP) markers. Genomic DNA from cultivated finger millet genotypes KNE755 and KNE796 was sequenced using both Roche 454 and Illumina technologies. Non-organelle sequencing reads were assembled into 207 Mbp representing approximately 13% of the finger millet genome. We identified 10,327 SSRs and 23,285 non-homeologous SNPs and tested 101 of each for polymorphism across a diverse set of wild and cultivated finger millet germplasm. For the 49 polymorphic SSRs, the mean polymorphism information content (PIC) was 0.42, ranging from 0.16 to 0.77. We also validated 92 SNP markers, 80 of which were polymorphic with a mean PIC of 0.29 across 30 wild and 59 cultivated accessions. Seventy-six of the 80 SNPs were polymorphic across 30 wild germplasm with a mean PIC of 0.30 while only 22 of the SNP markers showed polymorphism among the 59 cultivated accessions with an average PIC value of 0.15. Genetic diversity analysis using the polymorphic SNP markers revealed two major clusters; one of wild and another of cultivated accessions. Detailed STRUCTURE analysis confirmed this grouping pattern and further revealed 2 sub-populations within wild E. coracana subsp. africana. Both STRUCTURE and genetic diversity analysis assisted with the correct identification of the new germplasm collections. These polymorphic SSR and SNP markers are a significant addition to the existing 82 published SSRs, especially with regard to the previously reported low polymorphism levels in finger millet. Our results also reveal an unexploited finger millet genetic resource that can be included in the regional breeding programs in order to efficiently optimize productivity

Foundations of Black Hole Accretion Disk Theory

This review covers the main aspects of black hole accretion disk theory. We begin with the view that one of the main goals of the theory is to better understand the nature of black holes themselves. In this light we discuss how accretion disks might reveal some of the unique signatures of strong gravity: the event horizon, the innermost stable circular orbit, and the ergosphere. We then review, from a first-principles perspective, the physical processes at play in accretion disks. This leads us to the four primary accretion disk models that we review: Polish doughnuts (thick disks), Shakura-Sunyaev (thin) disks, slim disks, and advection-dominated accretion flows (ADAFs). After presenting the models we discuss issues of stability, oscillations, and jets. Following our review of the analytic work, we take a parallel approach in reviewing numerical studies of black hole accretion disks. We finish with a few select applications that highlight particular astrophysical applications: measurements of black hole mass and spin, black hole vs. neutron star accretion disks, black hole accretion disk spectral states, and quasi-periodic oscillations (QPOs).Comment: 91 pages, 23 figures, final published version available at http://www.livingreviews.org/lrr-2013-

Inferring Phylogenies from RAD Sequence Data

Reduced-representation genome sequencing represents a new source of data for systematics, and its potential utility in interspecific phylogeny reconstruction has not yet been explored. One approach that seems especially promising is the use of inexpensive short-read technologies (e.g., Illumina, SOLiD) to sequence restriction-site associated DNA (RAD) – the regions of the genome that flank the recognition sites of restriction enzymes. In this study, we simulated the collection of RAD sequences from sequenced genomes of different taxa (Drosophila, mammals, and yeasts) and developed a proof-of-concept workflow to test whether informative data could be extracted and used to accurately reconstruct “known” phylogenies of species within each group. The workflow consists of three basic steps: first, sequences are clustered by similarity to estimate orthology; second, clusters are filtered by taxonomic coverage; and third, they are aligned and concatenated for “total evidence” phylogenetic analysis. We evaluated the performance of clustering and filtering parameters by comparing the resulting topologies with well-supported reference trees and we were able to identify conditions under which the reference tree was inferred with high support. For Drosophila, whole genome alignments allowed us to directly evaluate which parameters most consistently recovered orthologous sequences. For the parameter ranges explored, we recovered the best results at the low ends of sequence similarity and taxonomic representation of loci; these generated the largest supermatrices with the highest proportion of missing data. Applications of the method to mammals and yeasts were less successful, which we suggest may be due partly to their much deeper evolutionary divergence times compared to Drosophila (crown ages of approximately 100 and 300 versus 60 Mya, respectively). RAD sequences thus appear to hold promise for reconstructing phylogenetic relationships in younger clades in which sufficient numbers of orthologous restriction sites are retained across species

Global patient outcomes after elective surgery: prospective cohort study in 27 low-, middle- and high-income countries.

BACKGROUND: As global initiatives increase patient access to surgical treatments, there remains a need to understand the adverse effects of surgery and define appropriate levels of perioperative care. METHODS: We designed a prospective international 7-day cohort study of outcomes following elective adult inpatient surgery in 27 countries. The primary outcome was in-hospital complications. Secondary outcomes were death following a complication (failure to rescue) and death in hospital. Process measures were admission to critical care immediately after surgery or to treat a complication and duration of hospital stay. A single definition of critical care was used for all countries. RESULTS: A total of 474 hospitals in 19 high-, 7 middle- and 1 low-income country were included in the primary analysis. Data included 44 814 patients with a median hospital stay of 4 (range 2-7) days. A total of 7508 patients (16.8%) developed one or more postoperative complication and 207 died (0.5%). The overall mortality among patients who developed complications was 2.8%. Mortality following complications ranged from 2.4% for pulmonary embolism to 43.9% for cardiac arrest. A total of 4360 (9.7%) patients were admitted to a critical care unit as routine immediately after surgery, of whom 2198 (50.4%) developed a complication, with 105 (2.4%) deaths. A total of 1233 patients (16.4%) were admitted to a critical care unit to treat complications, with 119 (9.7%) deaths. Despite lower baseline risk, outcomes were similar in low- and middle-income compared with high-income countries. CONCLUSIONS: Poor patient outcomes are common after inpatient surgery. Global initiatives to increase access to surgical treatments should also address the need for safe perioperative care. STUDY REGISTRATION: ISRCTN5181700

The utility of Escherichia coli as a contamination indicator for rural drinking water: evidence from whole genome sequencing

Across the water sector, Escherichia coli is the preferred microbial water quality indicator and current guidance upholds that it indicates recent faecal contamination. This has been challenged, however, by research demonstrating growth of E. coli in the environment. In this study, we used whole genome sequencing to investigate the links between E. coli and recent faecal contamination in drinking water. We sequenced 103 E. coli isolates sampled from 9 water supplies in rural Kitui County, Kenya, including points of collection (n = 14) and use (n = 30). Biomarkers for definitive source tracking remain elusive, so we analysed the phylogenetic grouping, multi-locus sequence types (MLSTs), allelic diversity, and virulence and antimicrobial resistance (AMR) genes of the isolates for insight into their likely source. Phylogroup B1, which is generally better adapted to water environments, is dominant in our samples (n = 69) and allelic diversity differences (z = 2.12, p = 0.03) suggest that naturalised populations may be particularly relevant at collection points with lower E. coli concentrations (<50 / 100mL). The strains that are more likely to have originated from human and/or recent faecal contamination (n = 50), were found at poorly protected collection points (4 sites) or at points of use (12 sites). We discuss the difficulty of interpreting health risk from E. coli grab samples, especially at household level, and our findings support the use of E. coli risk categories and encourage monitoring that accounts for sanitary conditions and temporal variability

Whole genome sequences of multi-drug resistant Escherichia coli isolated in a Pastoralist Community of Western Uganda: phylogenomic changes, virulence and resistant genes

BACKGROUND:The crisis of antimicrobial resistance is already here with us, affecting both humans and animals alike and very soon, small cuts and surgeries will become life threatening. This study aimed at determine the whole genome sequences of multi-drug resistant Escherichia coli isolated in a Pastoralist Community of Western Uganda: phylogenomic changes, virulence and resistant genes. METHODS:This was a laboratory based cross sectional study. Bacterial isolates analyzed in this study were 42 multidrug resistant E. coli isolated from stool samples from both humans (n = 30) and cattle (n = 12) in pastoralist communities collected between January 2018-March 2019. Most of the isolates (41/42) were resistant to three or more antibiotics (multi-drug resistant) and 21/42 isolates were ESBL producers; 13/30 from human and 8/12 from cattle. Whole Genome Sequencing (WGS) was carried out at the facilities of Kenya Medical Research Institute-Wellcome trust, Kilifi, to determine the phylogenomic changes, virulence and resistant genes. RESULTS:At household level, the genomes from both human and animals clustered away from one another except for one instance where two human isolates from the same household clustered together. However, 67% of the E. coli isolated from cattle were closely related to those found in humans. The E. coli isolates were assigned to eight different phylogroups: A, B1, B2, Cladel, D, E, F and G, with a majority being assigned to phylogroup A; while most of the animal isolates were assigned to phylogroup B1. The carriage of multiple AMR genes was higher from the E. coli population from humans than those from cattle. Among these were Beta-lactamase; blaOXA-1: Class D beta-lactamases; blaTEM-1, blaTEM-235: Beta-lactamase; catA1: chloramphenicol acetyl transferase; cmlA1: chloramphenicol efflux transporter; dfrA1, dfrA12, dfrA14, dfrA15, dfrA17, dfrA5, dfrA7, dfrA8: macrolide phosphotransferase; oqxB11: RND efflux pump conferring resistance to fluoroquinolone; qacL, qacEdelta1: quinolone efflux pump; qnrS1: quinolone resistance gene; sul1, sul2, sul3: sulfonamide resistant; tet(A), tet(B): tetracycline efflux pump. A high variation of virulence genes was registered among the E. coli genomes from humans than those of cattle origin. CONCLUSION:From the analysis of the core genome and phenotypic resistance, this study has demonstrated that the E. coli of human origin and those of cattle origin may have a common ancestry. Limited sharing of virulence genes presents a challenge to the notion that AMR in humans is as a result of antibiotic use in the farm and distorts the picture of the directionality of transmission of AMR at a human-animal interface and presents a task of exploring alternative routes of transmission of AMR

Identification of SNP and SSR markers in finger millet using next generation sequencing technologies

Finger millet is an important cereal crop in eastern Africa and southern India with excellent grain storage quality and unique ability to thrive in extreme environmental conditions. Since negligible attention has been paid to improving this crop to date, the current study used Next Generation Sequencing (NGS) technologies to develop both Simple Sequence Repeat (SSR) and Single Nucleotide Polymorphism (SNP) markers. Genomic DNA from cultivated finger millet genotypes KNE755 and KNE796 was sequenced using both Roche 454 and Illumina technologies. Non-organelle sequencing reads were assembled into 207 Mbp representing approximately 13% of the finger millet genome. We identified 10,327 SSRs and 23,285 non-homeologous SNPs and tested 101 of each for polymorphism across a diverse set of wild and cultivated finger millet germplasm. For the 49 polymorphic SSRs, the mean polymorphism information content (PIC) was 0.42, ranging from 0.16 to 0.77. We also validated 92 SNP markers, 80 of which were polymorphic with a mean PIC of 0.29 across 30 wild and 59 cultivated accessions. Seventy-six of the 80 SNPs were polymorphic across 30 wild germplasm with a mean PIC of 0.30 while only 22 of the SNP markers showed polymorphism among the 59 cultivated accessions with an average PIC value of 0.15. Genetic diversity analysis using the polymorphic SNP markers revealed two major clusters; one of wild and another of cultivated accessions. Detailed STRUCTURE analysis confirmed this grouping pattern and further revealed 2 sub-populations within wild E. coracana subsp. africana. Both STRUCTURE and genetic diversity analysis assisted with the correct identification of the new germplasm collections. These polymorphic SSR and SNP markers are a significant addition to the existing 82 published SSRs, especially with regard to the previously reported low polymorphism levels in finger millet. Our results also reveal an unexploited finger millet genetic resource that can be included in the regional breeding programs in order to efficiently optimize productivity

Identification of SNP and SSR markers in finger millet using next generation sequencing technologies

Finger millet is an important cereal crop in eastern Africa and southern India with excellent grain storage quality and unique ability to thrive in extreme environmental conditions. Since negligible attention has been paid to improving this crop to date, the current study used Next Generation Sequencing (NGS) technologies to develop both Simple Sequence Repeat (SSR) and Single Nucleotide Polymorphism (SNP) markers. Genomic DNA from cultivated finger millet genotypes KNE755 and KNE796 was sequenced using both Roche 454 and Illumina technologies. Non-organelle sequencing reads were assembled into 207 Mbp representing approximately 13% of the finger millet genome. We identified 10,327 SSRs and 23,285 non-homeologous SNPs and tested 101 of each for polymorphism across a diverse set of wild and cultivated finger millet germplasm. For the 49 polymorphic SSRs, the mean polymorphism information content (PIC) was 0.42, ranging from 0.16 to 0.77. We also validated 92 SNP markers, 80 of which were polymorphic with a mean PIC of 0.29 across 30 wild and 59 cultivated accessions. Seventy-six of the 80 SNPs were polymorphic across 30 wild germplasm with a mean PIC of 0.30 while only 22 of the SNP markers showed polymorphism among the 59 cultivated accessions with an average PIC value of 0.15. Genetic diversity analysis using the polymorphic SNP markers revealed two major clusters; one of wild and another of cultivated accessions. Detailed STRUCTURE analysis confirmed this grouping pattern and further revealed 2 sub-populations within wild E. coracana subsp. africana. Both STRUCTURE and genetic diversity analysis assisted with the correct identification of the new germplasm collections. These polymorphic SSR and SNP markers are a significant addition to the existing 82 published SSRs, especially with regard to the previously reported low polymorphism levels in finger millet. Our results also reveal an unexploited finger millet genetic resource that can be included in the regional breeding programs in order to efficiently optimize productivity

Infestation mechanisms of two woodborer species in the mangrove Sonneratia alba J. Smith in Kenya and co-occurring endophytic fungi

Insect damage on trees can severely affect the quality of timber, reduce the fecundity of the host and render it susceptible to fungal infestation and disease. Such pathology weakens or eventually kills the host. Infestation by two insect woodborer species (a moth and a beetle) is causing mortality of Sonneratia alba, a wide-ranging pioneer mangrove species of the Indo-Pacific. Establishing the infestation mechanism of the two insect woodborer species is an initial and essential step towards understanding their ecological role in the mangroves and in determining sustainable management priorities and options. Our main objectives were to investigate the infestation mechanism employed by the two insect woodborers which infest S. alba trees, to establish the occurrence of secondary infestation by endophytic fungi in the infested S. alba branches, and to explore a control management option to the woodborer infestation. We conducted an external inspection of infested branches in two large embayments in Kenya, Gazi Bay and Mida Creek, and by splitting infested branches we determined the respective internal infestation mechanisms. Infested wood samples from Gazi Bay and Mida Creek were incubated at 28±1°C for 3-5 days to establish the presence of fungi. A survey was conducted in both Gazi Bay and Mida Creek to ascertain the presence of ants on S. alba. The infestation characteristics of the two insect woodborer species were different. It took 6-8 months for the beetle to kill a branch of 150 cm-200 cm long. For the moth to kill a branch, it depended upon several factors including the contribution by multiple species, other than the moth infestation alone. A total of 15 endophytic fungal species were identified. Two ant species Oecophylla longipoda and a Pheidole sp. inhabited 62% and 69% respectively of sampled S. alba trees in Gazi Bay whereas only Pheidole sp. inhabited 17% of the sampled S. alba trees in Mida Creek. In summary, we have documented the time it takes each woodborer species to kill a branch, the infestation mechanism of the two insect woodborers, and we hypothesized on the role of two ant species. The presence of several different fungal species was ascertained, and we discussed their possible role in the infested wood. Our results cannot unambiguously associate the woodborers and identified fungi. We recommend further studies to investigate the presence or absence, and if present, the nature of fungi in the gut of the woodborers