Clinkering and hydration study of non-active and active Belite-Alite-Ye'elimite (BAY) cements

The aim of AIM is to promote industry-driven, interdisciplinary research in material science and engineering in order to provide leading-edge, sustainable solutions to the challenges facing engineers in today’s changing society and environment. http://www.ucl.ac.uk/aim/conference-info/37ccsThe manufacturing process of ye'elimite rich cements emit about 15-37% less CO2 to the atmosphere than OPC. Cements that contain belite, ye’elimite and ferrite, known as BYF cements, are promising eco-friendly binders. However, belite, their main phase, shows a slow hydrating behaviour; therefore the corresponding mortars present lower mechanical strengths than OPC at early ages. To solve this problem, BYF clinkers can be activated by: i) forming alite jointly with belite and ye’elimite during clinkering, known as BAY clinkers. The alite and ye’elimite reaction with water should develop high mechanical strengths at early ages, besides, belite contributes to later curing times. ii) A second activation is based on the stabilisation of alpha forms of belite by dopants. The objective of this work is to obtain two types of BAY clinkers (standard and active BAY) using CaF2 as mineraliser and borax as dopant agent to stabilize alpha forms of belite phase. After that, anhydrite was added as sulphate source to obtain the corresponding cements. The hydration behaviour of these cements has been studied through rheological and x-ray diffraction measurements, the latter combined with Rietveld quantitative phase analysis. In addition, mechanical and dimensional properties of BAY mortars are also presented and discussed.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

Development of an improved Pseudoalteromonas haloplanktis TAC125 strain for recombinant protein secretion at low temperature

Background: In a previous paper, we reported the accomplishment of a cold gene-expression system for the recombinant secretion of heterologous proteins in Pseudoalteromonas haloplanktis TAC125. This system makes use of the psychrophilic α-amylase from P. haloplanktis TAB23 as secretion carrier, and allows an effective extra-cellular addressing of recombinant proteins. However, Pseudoalteromonales are reported to secrete a wide range of extra-cellular proteases. This feature works against the efficiency of the cold-adapted secretion system, because of the proteolytic degradation of recombinant products. The aim of this study is the construction of a P. haloplanktis TAC125 mutant strain with reduced extra-cellular proteolytic activity. Results: P. haloplanktis TAC125 culture medium resulted to contain multiple and heterogeneous proteases. Since the annotation of the Antarctic bacterium genome highlighted the presence of only one canonical secretion machinery, namely the Type II secretion pathway (T2SS), we have inactivated this secretion system by a gene insertion strategy. A mutant strain of P. haloplanktis TAC125 in which the gspE gene was knocked-out, actually displayed a remarkable reduction of the extra-cellular protease secretion. Quite interestingly this strain still retained the ability to secrete the psychrophilic amylase as efficiently as the wild type. Moreover, the decrease in extra-cellular proteolytic activity resulted in a substantial improvement in the stability of the secreted amylase-β-lactamase chimera. Conclusion: Here we report a cell engineering approach to the construction of a P. haloplanktis TAC125 strain with reduced extra-cellular protease activity. The improved strain is able to secrete the psychrophilic α-amylase (the carrier of our recombinant secretion system), while it displays a significant reduction of protease content in the culture medium. These features make the gspE mutant an improved host with a remarkable biotechnological potential in recombinant protein secretion at low temperature. Moreover this work demonstrates that P. haloplanktis TAC125 is a versatile psychrophilic host for recombinant protein production since it can be easily improved by a directed engineering approach. To the best of our knowledge, this is the first described example of a strain improvement strategy applied to an Antarctic bacterium

Early hydration study of standard and doped Alite-Belite-Ye’elimite (ABY) cements through Synchrotron Radiation

The manufacturing of ye'elimite-rich cements releases from 15 to 37%, depending on their composition, less CO2 to the atmosphere than ordinary Portland cement (OPC). BYF cements containing belite, ye’elimite and ferrite as main crystalline phases, are promising eco-friendly binders. Nevertheless, belite, its main phase, shows a slow hydrating behaviour and the mechanical strengths are lower than OPC at early ages. Some alternatives to solve this problem are: i) forming alite jointly with belite and ye’elimite during clinkering, Alite Belite Ye’elimite (ABY) clinkers. The hydration of alite and ye’elimite would develop high mechanical strengths at early ages, and belite contributes to later curing times; ii) a second alternative is the stabilisation of alpha forms of belite using dopants such as boron named here after dABY. In this work, two different types of ABY clinkers (standard and doped) have been prepared and characterized to understand their different hydration mechanisms at the same water-to-cement (w/c) ratio. The clinkers have been prepared using CaF2 and ZnO as mineralizers, and borax as dopant agent to stabilize alpha forms of belite (’H-C2S). Afterwards, 14 wt% of anhydrite (as soluble sulphate source) was added to prepare the corresponding cements. Finally, the hydration study was performed at w/c ratio of 0.5. Here, an in-situ hydration study using synchrotron X-ray powder diffraction (SXRPD) for the first 14 hours of hydration is reported. Moreover, these results will be combined with the ex-situ laboratory X-ray powder diffraction study (LXRPD) at 1 day of hydration and calorimetric results. Rietveld quantitative phase analysis has been used to establish the phase evolution across the time.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. MINECO ( BIA2017-82391-R), co-funded by FEDER, and I3 [IEDI-2016-0079]

Water-to-cement ratio influence on low-carbon cements performances

Portland Cement (PC) is the most important active ingredient in most of the construction concrete. However, the PC production is associated with a high carbon dioxide release (around 1 ton of CO2 per ton of PC). One approach to reduce CO2 emissions consists on the reformulation of the clinker with less calcite demanding phases, such as, belite rich clinkers. The drawback of this kind of clinkers is the low reactivity of belite (beta-belite). In order to compensate this problem, belite rich clinkers can be prepared with ye’elimite and ferrite or with alite [known as belite-ye’elimite-ferrite (BYF) and belite-alite-ye’elimite (BAY), respectively]. In addition, it can be improved by using a high reactive belite polymorph, such as alpha-belite. In this work, the hydration and mechanical behaviour of BYF and BAY cements (with beta and/or alpha-belite) with different water-to-cement ratios have been studied. The clinkers were produced using natural raw materials, and were mixed with anhydrite (CaSO4) to prepare the corresponding cements. At early ages, the main hydration products of these cements were ettringite, calcium monosulfoaluminate and amorphous aluminium hydroxide. At later ages, stratlingite, katoite and amorphous C-S-H were found. The compressive strength values of the corresponding mortars were correlated with the mineralogy evolution of the pastes (mainly obtained by XRD and TGA).Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. I3-Ramón y Cajal Universidad de Malag

Synchrotron x-ray pair distribution function: A tool to characterize cement gels

Cement matrices contain large amounts of crystalline phases jointly with amorphous and/or nanocrystalline phases. Consequently, their analyses are very challenging. Synchrotron powder diffraction in combination with the pair distribution function (PDF) methodology is very useful to characterize such complex cement pastes. This work is focused on the study of the short and medium range atomic arrangement(s) in the different nanocrystalline gels which are present in the cement pastes through total scattering Pair Distribution Function quantitative phase analyses.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. Acknowledgments: We thank CELLS-ALBA (Barcelona, Spain) for providing synchrotron beam time and the financial support by BIA2014-57658-C2-1-R and BIA2014-57658-C2-2-R, which is co-funded by FEDER. We also thank Dr. Monica Dapiaggi for her contribution with the PDF study of Ca(OH)2 monolayer

Synchrotron Radiation Pair Distribution Function Analysis of Gels in Cements

The analysis of atomic ordering in a nanocrystalline phase with small particle sizes, below 5 nm, is intrinsically complicated because of the lack of long-range order. Furthermore, the presence of additional crystalline phase(s) may exacerbate the problem, as is the case in cement pastes. Here, we use the synchrotron pair distribution function (PDF) chiefly to characterize the local atomic order of the nanocrystalline phases, gels, in cement pastes. We have used a multi r-range analysis approach, where the ~4–7 nm r-range allows determining the crystalline phase contents; the ~1–2.5 nm r-range is used to characterize the atomic ordering in the nanocrystalline component; and the ~0.2–1.0 nm r-range gives insights about additional amorphous components. Specifically, we have prepared four alite pastes with variable water contents, and the analyses showed that a defective tobermorite, Ca11Si9O28(OH)2 8.5H2O, gave the best fit. Furthermore, the PDF analyses suggest that the calcium silicate hydrate gel is composed of this tobermorite and amorphous calcium hydroxide. Finally, this approach has been used to study alternative cements. The hydration of monocalcium aluminate and ye’elimite pastes yield aluminum hydroxide gels. PDF analyses show that these gels are constituted of nanocrystalline gibbsite, and the particle size can be as small as 2.5 nmThis work has been supported by Spanish MINECO through BIA2014-57658-C2-2-R, which is co-funded by FEDER, BIA2014-57658-C2-1-R and I3 (IEDI-2016-0079) grants. We also thank CELLS-ALBA (Barcelona, Spain) for providing synchrotron beam time at BL04-MSPD beamline. Finally, we thank Prof. Simon Billinge, Long Yang and Monica Dapiaggi for their help with the PDF script and simulations for Ca(OH)2 scattering dat

Kidney regeneration: common themes from the embryo to the adult

The vertebrate kidney has an inherent ability to regenerate following acute damage. Successful regeneration of the injured kidney requires the rapid replacement of damaged tubular epithelial cells and reconstitution of normal tubular function. Identifying the cells that participate in the regeneration process as well as the molecular mechanisms involved may reveal therapeutic targets for the treatment of kidney disease. Renal regeneration is associated with the expression of genetic pathways that are necessary for kidney organogenesis, suggesting that the regenerating tubular epithelium may be “reprogrammed” to a less-differentiated, progenitor state. This review will highlight data from various vertebrate models supporting the hypothesis that nephrogenic genes are reactivated as part of the process of kidney regeneration following acute kidney injury (AKI). Emphasis will be placed on the reactivation of developmental pathways and how our understanding of the resulting regeneration process may be enhanced by lessons learned in the embryonic kidney.Fil: Cirio, Maria Cecilia. University of Pittsburgh; Estados Unidos. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: de Groh, Eric D.. University of Pittsburgh; Estados UnidosFil: de Caestecker, Mark P.. Vanderbilt University; Estados UnidosFil: Davidson, Alan J.. The University of Auckland; Nueva ZelandaFil: Hukriede, Neil A.. University of Pittsburgh; Estados Unido

Pair distribution function studies in cementitious systems

The analysis of amorphous/nanocrystalline phase(s) within cement matrices that contain high amounts of crystalline phase(s) is very challenging. Synchrotron techniques can be very useful to characterize such complex samples.1 This work is focused on total scattering Pair Distribution Function (PDF) quantitative phase analyses in selected real-space ranges for a better understanding of the binding gel(s). Powder diffraction data collected in BL04-MSPD beamline have been analyzed by PDF and Rietveld methodologies to determine nanocrystalline and microcrystalline phase contents. The comparison between both methodologies allows us to have a better insight about the nanocrystalline/microcrystalline components which coexist in cement pastes. Three sets of hydrated model samples have been studied: i) monocalcium aluminate, CaAl2O4, the main component of calcium aluminate cements, ii) ye’elimite, Ca4Al6SO16, the main component of calcium sulfoaluminate cements, and iii) tricalcium silicate, Ca3SiO5, the main component of Portland cements. For the CaAl2O4 paste, the PDF fit shows that the aluminum hydroxide gel has a gibbsite local structure with an average particle size close to 5 nm.2 Figure 1 shows the final fit for CaAl2O4 paste in two different real-space regions. On the contrary, for Ca4Al6SO16 paste, it has been found that the particle size of the aluminum hydroxide gel is below 3 nm. Moreover, the Ca3SiO5 paste contains a different nanocrystalline gel, C-S-H, which has also been thoroughly studied. Different crystal structures (including Tobermorite, Clinotobermorite and Jennite) have been tested to find the structural model that fits better the experimental data. The results from this ongoing investigation will be reported and discussed.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech. This work has been supported by Spanish MINECO through BIA2014-57658-C2-1-R and BIA2014-57658-C2-2-R, which is co-funded by FEDER, research grants. We also thank CELLS-ALBA for providing synchrotron beam time at BL04-MSPD

Rietveld Quantitative Phase Analysis of Oil Well Cement: in Situ Hydration Study at 150 Bars and 150 °C

Oil and gas well cements are multimineral materials that hydrate under high pressure and temperature. Their overall reactivity at early ages is studied by a number of techniques including through the use of the consistometer. However, for a proper understanding of the performance of these cements in the field, the reactivity of every component, in real‐world conditions, must be analysed. To date, in situ high energy synchrotron powder diffraction studies of hydrating oil well cement pastes have been carried out, but the quality of the data was not appropriated for Rietveld quantitative phase analyses. Therefore, the phase reactivities were followed by the inspection of the evolution of non‐overlapped diffraction peaks. Very recently, we have developed a new cell specially designed to rotate under high pressure and temperature. Here, this spinning capillary cell is used for in situ studies of the hydration of a commercial oil well cement paste at 150 bars and 150 °C. The powder diffraction data were analysed by the Rietveld method to quantitatively determine the reactivities of each component phase. The reaction degree of alite was 90% after 7 hours, and that of belite was 42% at 14 hours. These analyses are accurate, as the in situ measured crystalline portlandite content at the end of the experiment, 12.9 wt%, compares relatively well with the value determined ex situ by thermal analysis, i.e., 14.0 wt%. The crystalline calcium silicates forming at 150 bars and 150 °C are also discussed.This research was funded by Spanish MINECO, grant number BIA2017‐82391‐R which is co‐funded by FEDER. We thank Marc Malfois for his help during the experiment performed at NCD‐SWEET beamline at ALBA synchrotron. We also thank Marcus Paul (Dyckerhoff GmbH) for providing the OWC sample with its characterization and helpful discussions