The Center of Excellence for Hypersonics Training and Research at the University of Texas at Austin

Over the period of this grant (1986-92), 23 graduate students were supported by the Center and received education and training in hypersonics through MS and Ph.D. programs. An additional 8 Ph.D. candidates and 2 MS candidates, with their own fellowship support, were attracted to The University of Texas and were recruited into the hypersonics program because of the Center. Their research, supervised by the 10 faculty involved in the Center, resulted in approximately 50 publications and presentations in journals and at national and international technical conferences. To provide broad-based training, a new hypersonics curriculum was created, enabling students to take 8 core classes in theoretical, computational, and experimental hypersonics, and other option classes over a two to four semester period. The Center also developed an active continuing education program. The Hypersonics Short Course was taught 3 times, twice in the USA and once in Europe. Approximately 300 persons were attracted to hear lectures by more than 25 of the leading experts in the field. In addition, a hypersonic aerodynamics short course was offered through AIAA, as well as short courses on computational fluid dynamics (CFD) and advanced CFD. The existence of the Center also enabled faculty to leverage a substantial volume of additional funds from other agencies, for research and graduate student training. Overall, this was a highly successful and highly visible program

Flowfield dynamics in blunt fin-induced shock wave/turbulent boundary layer interactions

Fluctuating wall pressure measurements have been made on centerline upstream of a blunt fin in a Mach 5 turbulent boundary layer. By examining the ensemble averaged wall pressure distributions for different separation shock foot positions, it has been shown that local fluctuating wall pressure measurements are due to a distinct pressure distribution, Rho(sub i), which undergoes a stretching and flattening effect as its upstream boundary translates aperiodically between the upstream influence and separation lines. The locations of the maxima and minima in the wall pressure standard deviation can be accurately predicted using this distribution, providing quantitative confirmation of the model. This model also explains the observed cross-correlations and ensemble average measurements within the interaction. Using the Rho(sub i) model, wall pressure signals from under the separated flow region were used to reproduce the position-time history of the separation shock foot. Further, the negative time delay peak in the cross-correlation between the predicted and actual shock foot histories suggests that the separated region fluctuations precede shock foot motion. The unsteady behavior of the primary horseshoe vortex and its relation to the unsteady separation shock are described

Control and reduction of unsteady pressure loads in separated shock wave turbulent boundary layer interaction

The focus was on developing means of controlling and reducing unsteady pressure loads in separated shock wave turbulent boundary layer interactions. Section 1 describes how vortex generators can be used to effectively reduce loads in compression ramp interaction, while Section 2 focuses on the effects of 'boundary-layer separators' on the same interaction

ADOPT: a tool for predicting adoption of agricultural innovations

A wealth of evidence exists about the adoption of new practices and technologies in agriculture but there does not appear to have been any attempt to simplify this vast body of research knowledge into a model to make quantitative predictions across a broad range of contexts. This is despite increasing demand from research, development and extension agencies for estimates of likely extent of adoption and the likely timeframes for project impacts. This paper reports on the reasoning underpinning the development of ADOPT (Adoption and Diffusion Outcome Prediction Tool). The tool has been designed to: 1) predict an innovation‘s likely peak extent of adoption and likely time for reaching that peak; 2) encourage users to consider the influence of a structured set of factors affecting adoption; and 3) engage R, D & E managers and practitioners by making adoptability knowledge and considerations more transparent and understandable. The tool is structured around four aspects of adoption: 1) characteristics of the innovation, 2) characteristics of the population, 3) actual advantage of using the innovation, and 4) learning of the actual advantage of the innovation. The conceptual framework used for developing ADOPT is described.Adoption, Diffusion, Prediction, Research and Development/Tech Change/Emerging Technologies,

Cut-wire-pair structures as two-dimensional magnetic metamaterials

We study numerically and experimentally magnetic metamaterials based on cut-wire pairs instead of split-ring resonators. The cut-wire pair planar structure is extended in order to create a truly two-dimensional metamaterial suitable for scaling to optical frequencies. We fabricate the cut-wire metamaterial operating at microwave frequencies with lattice spacing around 10% of the free-space wavelength, and find good agreement with direct numerical simulations. Unlike the structures based on split-ring resonators, the nearest-neighbor coupling in cut-wire pairs can result in a magnetic stop-band with propagation in the transverse direction

Acceptability of an open-label wait-listed trial design: Experiences from the PROUD PrEP study

Background PROUD participants were randomly assigned to receive pre-exposure prophylaxis (PrEP) immediately or after a deferred period of one-year. We report on the acceptability of this open-label wait-listed trial design. Methods Participants completed an acceptability questionnaire, which included categorical study acceptability data and free-text data on most and least liked aspects of the study. We also conducted in-depth interviews (IDI) with a purposely selected sub-sample of participants. Results Acceptability questionnaires were completed by 76% (415/544) of participants. After controlling for age, immediate-group participants were almost twice as likely as deferred-group participants to complete the questionnaire (AOR:1.86;95%CI:1.24,2.81). In quantitative data, the majority of participants in both groups found the wait-listed design acceptable when measured by satisfaction of joining the study, intention to remain in the study, and interest in joining a subsequent study. However, three-quarters thought that the chance of being in the deferred-group might put other volunteers off joining the study. In free-text responses, data collection tools were the most frequently reported least liked aspect of the study. A fifth of deferred participants reported ‘being deferred’ as the thing they least liked about the study. However, more deferred participants disliked the data collection tools than the fact that they had to wait a year to access PrEP. Participants in the IDIs had a good understanding of the rationale for the open-label wait-listed study design. Most accepted the design but acknowledged they were, or would have been, disappointed to be randomised to the deferred group. Five of the 25 participants interviewed reported some objection to the wait-listed design. Conclusion The quantitative and qualitative findings suggest that in an environment where PrEP was not available, the rationale for the wait-listed trial design was well understood and generally acceptable to most participants in this study

Agribusiness Sheep Updates - 2004 - Part 1

Proceedings of the Agribusiness Sheep Updates - 2004 Forward Dr Mark Dolling Manager, Sheep Industries and Pasture, Department of Agriculture Western Australia Keynotes Australian Wool Innovation Limited DR LEN STEPHENS AUSTRALIAN WOOL INNOVATION LIMITED (AWI) Commercialisation of Sheepmeat Eating Quality Outcomes, David Thomason, General Manger Marketing Meat & livestock Australia Limited PLENARY The Fitness of the Future Merino, Norm Adams and Shimin Liu, CSIRO Livestock Industries Ovine Johne’s Disease – Managing the Disease, Managing the Issues, PETER BUCKMAN, CHIEF VETERINARY OFFICER, DEPARTMENT OF AGRICULTURE WESTERN AUSTRALIA Animal Welfare – Changes in Latitudes Changes in Attitudes, Michael Paton and Dianne Evans, Department of Agriculture Western Australian. Live Sheep Exports, JOHN EDWARDS. CHAIRMAN, WESTERN AUSTRALIAN LIVE SHEEP EXPORTERS ASSOCIATION MeCustomising to the Needs of the Customer – Insights from the New Zealand Merino Experience, DR SCOTT CHAMPION, RESEARCH, DEVELOPMENT AND PRODUCT INNOVATION MANAGER, THE NEW ZEALAND MERINO COMPANY LIMITED Agribusiness Sheep Updates Conference -Economic and Financial Market Update Alan Langford, Economist, BankWest Concurrent sessions - Meeting the Market Breeding Wool to Address Consumer Requirements in Fabrics A.C. SCHLINK CSIRO Livestock Industries, J.C. GREEFF AND M. E. LADYMAN Department of Agriculture Western Australia Fibre Contribution to Retail Demand for Knitwear Melanie LadymanA and John StantonAB ADepartment of Agriculture Western Australia and BCurtin University of Technology Sustainable Merino, is this the Future for Merino? Stuart Adams, iZWool International P/L Meeting lamb Market Specs from Crossbred Ewes Dr. Neal Fogarty, NSW Agriculture and the Australian Sheep Industry CRC Use of Serial Body Weight Measurements in Prime Lamb Finishing Systems Matthew Kelly, CSIRO Livestock Industries, James Skerritt, Ian McFarland Department of Agriculture Western Australia, Australian Sheep Industry CR

Clinical Utility of Circulating Tumour Cell Androgen Receptor Splice Variant-7 Status in Metastatic Castration-resistant Prostate Cancer.

Abstract Background Detection of androgen receptor splice variant-7 (AR-V7) mRNA in circulating tumour cells (CTCs) is associated with worse outcome in metastatic castration-resistant prostate cancer (mCRPC). However, studies rarely report comparisons with CTC counts and biopsy AR-V7 protein expression. Objective To determine the reproducibility of AdnaTest CTC AR-V7 testing, and associations with clinical characteristics, CellSearch CTC counts, tumour biopsy AR-V7 protein expression and overall survival (OS). Design, setting, and participants CTC AR-V7 status was determined for 227 peripheral blood samples, from 181 mCRPC patients with CTC counts (202 samples; 136 patients) and matched mCRPC biopsies (65 samples; 58 patients). Outcome measurements and statistical analysis CTC AR-V7 status was associated with clinical characteristics, CTC counts, and tissue biopsy AR-V7 protein expression. The association of CTC AR-V7 status and other baseline variables with OS was determined. Results and limitations Of the samples, 35% were CTC+/AR-V7+. CTC+/AR-V7+ samples had higher CellSearch CTC counts (median CTC; interquartile range [IQR]: 60, 19–184 vs 9, 2–64; Mann-Whitney test p Conclusions Studies reporting the prognostic relevance of CTC AR-V7 status must account for CTC counts. Discordant CTC AR-V7 results and AR-V7 protein expression in matched, same-patient biopsies are reported. Patient summary Liquid biopsies that determine circulating tumour cell androgen receptor splice variant-7 status have the potential to impact treatment decisions in metastatic castration-resistant prostate cancer patients. Robust clinical qualification of these assays is required before their routine use