17 research outputs found
Prevention of Staphylococcus aureus biofilm formation by antibiotics in 96-Microtiter Well Plates and Drip Flow Reactors : critical factors influencing outcomes
Biofilm formation leads to the failure of antimicrobial therapy. Thus, biofilm prevention is a desirable goal of antimicrobial research. In this study, the efficacy of antibiotics (doxycycline, oxacillin and rifampicin) in preventing Staphylococcus aureus biofilms was investigated using Microtiter Well Plates (MWP) and Drip Flow Reactors (DFR), two models characterized by the absence and the presence of a continuous flow of nutrients, respectively. Planktonic culture of S. aureus was exposed to antibiotics for one hour followed by 24 hours incubation with fresh nutrients in MWP or continuous flow of nutrients in DFR. The DFR grown biofilms were significantly more tolerant to the antibiotics than those grown in MWP without the continuous flow. The differences in log reductions (LR) between the two models could not be attributed to differences in the cell density, the planktonic inoculum concentration or the surface-area-to-volume ratios. However, eliminating the flow in the DFR significantly restored the antibiotic susceptibility. These findings demonstrate the importance of considering differences between experimental conditions in different model systems, particularly the flow of nutrients, when performing anti-biofilm efficacy evaluations. Biofilm antibiotic efficacy studies should be assessed using various models and more importantly, in a model mimicking conditions of its clinical application.Peer reviewe
α,α-disubstituted β-amino amides eliminate Staphylococcus aureus biofilms by membrane disruption and biomass removal
Bacterial biofilms account for up to 80% of all infections and complicate successful therapies due to their intrinsic tolerance to antibiotics. Biofilms also cause serious problems in the industrial sectors, for instance due to the deterioration of metals or microbial contamination of products. Efforts are put in finding novel strategies in both avoiding and fighting biofilms. Biofilm control is achieved by killing and/or removing biofilm or preventing transition to the biofilm lifestyle. Previous research reported on the anti-biofilm potency of α,α-disubstituted β-amino amides A1, A2 and A3, which are small antimicrobial peptidomimetics with a molecular weight below 500 Dalton. In the current study it was investigated if these derivatives cause a fast disintegration of biofilm bacteria and removal of Staphylococcus aureus biofilms. One hour incubation of biofilms with all three derivatives resulted in reduced metabolic activity and membrane permeabilization in S. aureus (ATCC 25923) biofilms. Bactericidal properties of these derivatives were attributed to a direct effect on membranes of biofilm bacteria. The green fluorescence protein expressing Staphylococcus aureus strain AH2547 was cultivated in a CDC biofilm reactor and utilized for disinfectant efficacy testing of A3, following the single-tube method (American Society for Testing and Materials designation number E2871). A3 at a concentration of 90 μM acted as fast as 100 μM chlorhexidine and was equally effective. Confocal laser scanning microscopy studies showed that chlorhexidine treatment lead to fluorescence fading indicating membrane permeabilization but did not cause biomass removal. In contrast, A3 treatment caused a simultaneous biofilm fluorescence loss and biomass removal. These dual anti-biofilm properties make α,α-disubstituted β-amino amides promising scaffolds in finding new control strategies against recalcitrant biofilms
Interlaboratory study for the evaluation of three microtiter plate-based biofilm quantification methods
Microtiter plate methods are commonly used for biofilm assessment. However, results obtained with these methods have often been difficult to reproduce. Hence, it is important to obtain a better understanding of the repeatability and reproducibility of these methods. An interlaboratory study was performed in five different laboratories to evaluate the reproducibility and responsiveness of three methods to quantify Staphylococcus aureus biofilm formation in 96-well microtiter plates: crystal violet, resazurin, and plate counts. An inter-lab protocol was developed for the study. The protocol was separated into three steps: biofilm growth, biofilm challenge, biofilm assessment. For control experiments participants performed the growth and assessment steps only. For treatment experiments, all three steps were performed and the efficacy of sodium hypochlorite (NaOCl) in killing S. aureus biofilms was evaluated. In control experiments, on the log(10)-scale, the reproducibility SD (S-R) was 0.44 for crystal violet, 0.53 for resazurin, and 0.92 for the plate counts. In the treatment experiments, plate counts had the best responsiveness to different levels of efficacy and also the best reproducibility with respect to responsiveness (Slope/S-R=1.02), making it the more reliable method to use in an antimicrobial efficacy test. This study showed that the microtiter plate is a versatile and easy-to-use biofilm reactor, which exhibits good repeatability and reproducibility for different types of assessment methods, as long as a suitable experimental design and statistical analysis is applied.Peer reviewe
Rapid detection of rRNA group I pseudomonads in contaminated metalworking fluids and biofilm formation by fluorescent in situ hybridization
Metalworking fluids (MWFs), used in different machining operations, are highly prone to microbial degradation. Microbial communities present in MWFs lead to biofilm formation in the MWF systems, which act as a continuous source of contamination. Species of rRNA group I Pseudomonas dominate in contaminated MWFs. However, their actual distribution is typically underestimated when using standard culturing techniques as most fail to grow on the commonly used Pseudomonas Isolation Agar. To overcome this, fluorescent in situ hybridization (FISH) was used to study their abundance along with biofilm formation by two species recovered from MWFs, Pseudomonas fluorescens MWF-1 and the newly described Pseudomonas oleovorans subsp. lubricantis. Based on 16S rRNA sequences, a unique fluorescent molecular probe (Pseudo120) was designed targeting a conserved signature sequence common to all rRNA group I Pseudomonas. The specificity of the probe was evaluated using hybridization experiments with whole cells of different Pseudomonas species. The probe\u27s sensitivity was determined to be 10 3 cells/ml. It successfully detected and enumerated the abundance and distribution of Pseudomonas indicating levels between 3.2 (±1.1)×10 6 and 5.0 (±2.3) ×10 6 cells/ml in four different industrial MWF samples collected from three different locations. Biofilm formation was visualized under stagnant conditions using high and low concentrations of cells for both P. fluorescens MWF-1 and P. oleovorans subsp. lubricantis stained with methylene blue and Pseudo120. On the basis of these observations, this molecular probe can be successfully be used in the management of MWF systems to monitor the levels and biofilm formation of rRNA group I pseudomonads. © Springer-Verlag 2011
Approaches to biofilm-associated infections: the need for standardized and relevant biofilm methods for clinical applications
Introduction: The concept of biofilms in human health and disease is now widely accepted as cause of chronic infection. Typically, biofilms show remarkable tolerance to many forms of treatments and the host immune response. This has led to vast increase in research to identify new (and sometimes old) anti-biofilm strategies that demonstrate effectiveness against these tolerant phenotypes.Areas covered: Unfortunately, a standardized methodological approach of biofilm models has not been adopted leading to a large disparity between testing conditions. This has made it almost impossible to compare data across multiple laboratories, leaving large gaps in the evidence. Furthermore, many biofilm models testing anti-biofilm strategies aimed at the medical arena have not considered the matter of relevance to an intended application. This may explain why some in vitro models based on methodological designs that do not consider relevance to an intended application fail when applied in vivo at the clinical level.Expert commentary: This review will explore the issues that need to be considered in developing performance standards for anti-biofilm therapeutics and provide a rationale for the need to standardize models/methods that are clinically relevant. We also provide some rational as to why no standards currently exist
Paired methods to measure biofilm killing and removal: a case study with Penicillin G treatment of Staphylococcus aureus biofilm
Biofilms are microbial aggregates that show high tolerance to antibiotic treatments in vitro and in vivo. Killing and removal are both important in biofilm control, therefore methods that measure these two mechanisms were evaluated in a parallel experimental design. Kill was measured using the single tube method (ASTM method E2871) and removal was determined by video microscopy and image analysis using a new treatment flow cell. The advantage of the parallel test design is that both methods used biofilm covered coupons harvested from a CDC biofilm reactor, a well‐established and standardized biofilm growth method. The control Staphylococcus aureus biofilms treated with growth medium increased by 0·6 logs during a 3‐h contact time. Efficacy testing showed biofilms exposed to 400 μmol l−1 penicillin G decreased by only 0·3 logs. Interestingly, time‐lapse confocal scanning laser microscopy revealed that penicillin G treatment dispersed the biofilm despite being an ineffective killing agent. In addition, no biofilm removal was detected when assays were performed in 96‐well plates. These results illustrate that biofilm behaviour and impact of treatments can vary substantially when assayed by different methods. Measuring both killing and removal with well‐characterized methods will be crucial for the discovery of new anti‐biofilm strategies
α,α-disubstituted β-amino amides eliminate Staphylococcus aureus biofilms by membrane disruption and biomass removal
Bacterial biofilms account for up to 80% of all infections and complicate successful therapies due to their intrinsic tolerance to antibiotics. Biofilms also cause serious problems in the industrial sectors, for instance due to the deterioration of metals or microbial contamination of products. Efforts are put in finding novel strategies in both avoiding and fighting biofilms. Biofilm control is achieved by killing and/or removing biofilm or preventing transition to the biofilm lifestyle. Previous research reported on the anti-biofilm potency of alpha,alpha-disubstituted beta-amino amides A1, A2 and A3, which are small antimicrobial peptidomimetics with a molecular weight below 500 Da. In the current study it was investigated if these derivatives cause a fast disintegration of biofilm bacteria and removal of Staphylococcus aureus biofilms. One hour incubation of biofilms with all three derivatives resulted in reduced metabolic activity and membrane permeabilization in S. aureus (ATCC 25923) biofilms. Bactericidal properties of these derivatives were attributed to a direct effect on membranes of biofilm bacteria. The green fluorescence protein expressing Staphy-lococcus aureus strain AH2547 was cultivated in a CDC biofilm reactor and utilized for disinfectant efficacy testing of A3, following the single tube method (American Society for Testing and Materials designation number E2871). A3 at a concentration of 90 mu M acted as fast as 100 mu M chlorhexidine and was equally effective. Confocal laser scanning microscopy studies showed that chlorhexidine treatment lead to fluorescence fading indicating membrane permeabilization but did not cause biomass removal. In contrast, A3 treatment caused a simultaneous biofilm fluorescence loss and biomass removal. These dual anti-biofilm properties make alpha,alpha-disubstituted beta-amino amides promising scaffolds in finding new control strategies against recalcitrant biofilms.Peer reviewe
Approaches to biofilm-associated infections : the need for standardized and relevant biofilm methods for clinical applications
Introduction: The concept of biofilms in human health and disease is now widely accepted as cause of chronic infection. Typically, biofilms show remarkable tolerance to many forms of treatments and the host immune response. This has led to vast increase in research to identify new (and sometimes old) anti-biofilm strategies that demonstrate effectiveness against these tolerant phenotypes. Areas covered: Unfortunately, a standardized methodological approach of biofilm models has not been adopted leading to a large disparity between testing conditions. This has made it almost impossible to compare data across multiple laboratories, leaving large gaps in the evidence. Furthermore, many biofilm models testing anti-biofilm strategies aimed at the medical arena have not considered the matter of relevance to an intended application. This may explain why some in vitro models based on methodological designs that do not consider relevance to an intended application fail when applied in vivo at the clinical level. Expert commentary: This review will explore the issues that need to be considered in developing performance standards for anti-biofilm therapeutics and provide a rationale for the need to standardize models/methods that are clinically relevant. We also provide some rational as to why no standards currently exist