Substrate Deformation Predicts Neuronal Growth Cone Advance

AbstractAlthough pulling forces have been observed in axonal growth for several decades, their underlying mechanisms, absolute magnitudes, and exact roles are not well understood. In this study, using two different experimental approaches, we quantified retrograde traction force in Aplysia californica neuronal growth cones as they develop over time in response to a new adhesion substrate. In the first approach, we developed a novel method, to our knowledge, for measuring traction forces using an atomic force microscope (AFM) with a cantilever that was modified with an Aplysia cell adhesion molecule (apCAM)-coated microbead. In the second approach, we used force-calibrated glass microneedles coated with apCAM ligands to guide growth cone advance. The traction force exerted by the growth cone was measured by monitoring the microneedle deflection using an optical microscope. Both approaches showed that Aplysia growth cones can develop traction forces in the 100–102 nN range during adhesion-mediated advance. Moreover, our results suggest that the level of traction force is directly correlated to the stiffness of the microneedle, which is consistent with a reinforcement mechanism previously observed in other cell types. Interestingly, the absolute level of traction force did not correlate with growth cone advance toward the adhesion site, but the amount of microneedle deflection did. In cases of adhesion-mediated growth cone advance, the mean needle deflection was 1.05 ± 0.07 μm. By contrast, the mean deflection was significantly lower (0.48 ± 0.06 μm) when the growth cones did not advance. Our data support a hypothesis that adhesion complexes, which can undergo micron-scale elastic deformation, regulate the coupling between the retrogradely flowing actin cytoskeleton and apCAM substrates, stimulating growth cone advance if sufficiently abundant

Combined shear/compression structural testing of asymmetric sandwich structures

Asymmetric sandwich technology can be applied in the design of lightweight, non-pressurized aeronautical structures such as those of helicopters. A test rig of asymmetric sandwich structures subjected to compression/shear loads was designed, validated, and set up. It conforms to the standard certification procedure for composite aeronautical structures set out in the “test pyramid”, a multiscale approach. The static tests until failure showed asymmetric sandwich structures to be extremely resistant, which, in the case of the tested specimen shape, were characterized by the absence of buckling and failure compressive strains up to 10,000 μ strains. Specimens impacted with perforation damage were also tested, enabling the original phenomenon of crack propagation to be observed step-by-step. The results of the completed tests thus enable the concept to be validated, and justify the possibility of creating a much larger machine to overcome the drawbacks linked to the use of small specimens

Verification and Validation of a Three-Dimensional Composite Impact Model with Tabulated Input

A material model which incorporates several key capabilities which have been identified by the aerospace community as lacking in the composite impact models currently available in the commercial transient dynamic finite element code LS-DYNA has been developed. The material model utilizes experimentally based tabulated input to define the evolution of plasticity and damage as opposed to specifying discrete input parameters (such as modulus and strength. The plasticity portion of the orthotropic, three-dimensional, macroscopic composite constitutive model is based on an extension of the Tsai-Wu composite failure model into a generalized yield function with a non-associative flow rule. The capability to account for the rate and temperature dependent deformation response of composites has also been incorporated into the material model. For the damage model, a strain equivalent formulation is utilized to allow for the uncoupling of the deformation and damage analyses. In the damage model, a diagonal damage tensor is defined to account for the directionally dependent variation of damage. However, the terms in the damage matrix are semi-coupled such that the damage in a particular coordinate direction is a function of the stresses and plastic strains in all of the coordinate directions. For the failure model, a tabulated approach is utilized in which a stress or strain based invariant is defined as a function of the location of the current stress state in stress space to define the initiation of failure, which allows an arbitrarily shaped failure surface to be defined. A systematic series of validation and verification studies, at a variety of length scales ranging from single element simulations to simulations of a flat panel impact test, have been performed to fully exercise and evaluate the capabilities of the developed model

Multispecies virial expansions

We study the virial expansion of mixtures of countably many different types of particles. The main tool is the Lagrange–Good inversion formula, which has other applications such as counting coloured trees or studying probability generating functions in multi-type branching processes. We prove that the virial expansion converges absolutely in a domain of small densities. In addition, we establish that the virial coefficients can be expressed in terms of two-connected graphs

Application of direct bioautography and SPME-GC-MS for the study of antibacterial chamomile ingredients

The isolation and characterization of antibacterial chamomile components were performed by the use of direct bioautography and solid phase microextraction (SPME)-GC-MS. Four ingredients, active against Vibrio fischeri, were identified as the polyacetylene geometric isomers cis- and trans-spiroethers, the coumarin related herniarin, and the sesquiterpene alcohol (-)-alpha-bisabolol

Interface electronic states and boundary conditions for envelope functions

The envelope-function method with generalized boundary conditions is applied to the description of localized and resonant interface states. A complete set of phenomenological conditions which restrict the form of connection rules for envelope functions is derived using the Hermiticity and symmetry requirements. Empirical coefficients in the connection rules play role of material parameters which characterize an internal structure of every particular heterointerface. As an illustration we present the derivation of the most general connection rules for the one-band effective mass and 4-band Kane models. The conditions for the existence of Tamm-like localized interface states are established. It is shown that a nontrivial form of the connection rules can also result in the formation of resonant states. The most transparent manifestation of such states is the resonant tunneling through a single-barrier heterostructure.Comment: RevTeX4, 11 pages, 5 eps figures, submitted to Phys.Rev.

Strong-coupling study of the Gribov ambiguity in lattice Landau gauge

We study the strong-coupling limit beta=0 of lattice SU(2) Landau gauge Yang-Mills theory. In this limit the lattice spacing is infinite, and thus all momenta in physical units are infinitesimally small. Hence, the infrared behavior can be assessed at sufficiently large lattice momenta. Our results show that at the lattice volumes used here, the Gribov ambiguity has an enormous effect on the ghost propagator in all dimensions. This underlines the severity of the Gribov problem and calls for refined studies also at finite beta. In turn, the gluon propagator only mildly depends on the Gribov ambiguity.Comment: 14 pages, 22 figures; minor changes, matches version to appear in Eur. Phys. J.

ABD Matrix of Single-Ply Triaxial Weave Fabric Composites

The linear-elastic response of single-ply triaxial weave fabric composites is modelled in terms of a homogenized Kirchhoff plate. The ABD matrix for this plate is computed from an assembly of transversely isotropic three-dimensional beams whose unit cell is analysed using standard finite-element analysis, assuming periodic boundary conditions. A subset of the analytical results is validated by means of careful experiments. It is shown that this simple unit cell beam model captures accurately the experimentally observed behaviour. I

Aerostructural design optimization of a 100-passenger regional jet with surrogate-based mission analysis

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/106481/1/AIAA2013-4372.pd

Venous Thromboembolism in Hip Fracture Patients: A Subanalysis of the FAITH and HEALTH Trials

BACKGROUND: The primary objective of this study was to determine the incidence of symptomatic venous thromboembolism (VTE), including pulmonary embolism (PE) and deep vein thrombosis (DVT), in the hip fracture population. Secondary objectives included determining timing of VTE diagnosis, VTE thromboprophylaxis given, and identifying any factors associated with VTE. METHODS: Using data from the FAITH and HEALTH trials, the incidence of VTE, including DVT and PE, and the timing of VTE were determined. A multivariable Cox regression analysis was used to determine which factors were associated with increased risk of VTE, including age, treatment for comorbidity, thromboprophylaxis, time to surgery, and method of fracture management. RESULTS: 2520 hip fracture patients were included in the analysis. Sixty-four patients (2.5%) had a VTE [DVT: 36 (1.4%), PE: 28 (1.1%)]. Thirty-five (54.7%) were diagnosed less than 6 weeks postfracture and 29 (45.3%) more than 6 weeks postfracture. One thousand nine hundred ninety-three (79%) patients received thromboprophylaxis preoperatively and 2502 (99%) received thromboprophylaxis postoperatively. The most common method of preoperative (46%) and postoperative (73%) thromboprophylaxis was low molecular weight heparin. Treatment with arthroplasty compared to internal fixation was the only variable associated with increased risk of VTE (hazard ratio 2.67, P = 0.02). CONCLUSIONS: The incidence of symptomatic VTE in hip fracture patients recruited to the 2 trials was 2.5%. Although over half of the cases were diagnosed within 6 weeks of fracture, VTE is still prevalent after this period. The majority of patients received thromboprophylaxis. Treatment with arthroplasty rather than fixation was associated with increased incidence of VTE. LEVEL OF EVIDENCE: Therapeutic Level II. See Instructions for Authors for a complete description of levels of evidence