Method of fabricating an article with cavities

An article having a cavity with a thin bottom wall is provided by assembling a thin sheet, for example, a metal sheet, adjacent to the surface of a member having one or more apertures. A bonding adhesive is interposed between the thin sheet and the subadjacent member, and the thin sheet is subjected to a high fluid pressure. In order to prevent the differential pressure from being exerted against the thin sheet, the aperture is filled with a plug of solid material having a linear coefficient of thermal expansion higher than that of the member. When the assembly is subjected to pressure, the material is heated to a temperature such that its expansion exerts a pressure against the thin sheet thus reducing the differential pressure

A Pilot Evaluation Study Using LectureTools to Enhance Interactivity in Classroom-Based Teaching in a Project Management Course

With students’ ownership of laptops and mobile devices increasing, there exists an opportunity to harness their use to support interactivity within the traditional classroom. Two educators, motivated to enhance interactivity in a two-day project management course at a UK university, trialled LectureTools, a cloud-based audience-response system. To assess potential benefits to learning and teaching, as well as identifying accompanying challenges, an evaluation study was carried out comprising a range of data sources. These included observation of a LectureTools-based lecture and a student questionnaire followed by a focus group discussion with a subset of students about their experiences throughout the two days. Interviews with both teachers were also conducted, adding to the evaluation research data and giving them an opportunity to reflect on their teaching practice. All participants recognised the benefits of LectureTools in promoting student engagement, learning and discussion while students acknowledged the distractive potential of having laptops in the lecture theatre. Efforts are required by educators to ensure that the interactive potential of laptops in classrooms to enhance learning and teaching is supported while controlling the potential for distraction. Future research is needed to ascertain the impact of using LectureTools on approaches to learning and teaching

Evaluation of the InDUCKtion project at UCL

Executive summary: There is evidence that a good induction to university life can help with student retention; however, there is also a danger of overwhelming students during the intense period of fresher’s week. Under the auspices of a small grant from the Higher Education Academy’s ‘Changing the Learning Landscape’ funding stream, staff at two universities (University College London and Southampton Solent University) collaborated to produce an innovative and engaging induction project entitled ‘InDUCKtion’, based on the idea of an induction duck being a fun character for students to interact with. At UCL, the InDUCKtion duck existed in the form of a physical plastic duck included in international postgraduate student induction packs, and they were encouraged to take photos of themselves in and around UCL and London as part of a photo challenge using social media. It was anticipated that this would enable students to familiarise themselves with the locale, make friends and have fun at the same time. The InDUCKtion duck was also evident on flyers and posters with QR codes advertising an online tour to enable students to gain an accelerated familiarisation with the campus and its facilities. Within UCL, the project was a collaborative, cross-departmental venture instigated by members of UCL’s E-Learning Environments (ELE) working in partnership with the Centre for the Advancement of Learning and Teaching (CALT) and Student Support and Wellbeing (SSW). The logistics of the project meant that the team members also had to liaise with a number of other individuals and departments around UCL, to help promote and implement the project. Despite a rapid following on Twitter in a relatively short period, a reasonable hit rate on the QR code for the main page of the online tour resource, and some engagement with the photo challenges using social media, participation in the project was lower than anticipated. Lessons learned from an evaluation perspective revealed that adding another activity to an already overwhelming fresher’s week was problematic, despite its innovative and interactive nature. The use of QR codes was problematic for a number of reasons, and the project needed more buy-in from student representatives and academics to provide institutional endorsement. Recommendations for future instances of the project include securing student representation and academic endorsement, integrating the activity with parallel induction activities – particularly with academic departments, replacing QR codes with an alternative technology-enhanced learning approach and optimising the learning design to better motivate students and promote groupwork

Genetic Basis for \u3cem\u3eRhizobium etli\u3c/em\u3e CE3 O-Antigen O-Methylated Residues That Vary According to Growth Conditions

The Rhizobium etli CE3 O antigen is a fixed-length heteropolymer with O methylation being the predominant type of sugar modification. There are two O-methylated residues that occur, on average, once per complete O antigen: a multiply O-methylated terminal fucose and 2-O methylation of a fucose residue within a repeating unit. The amount of the methylated terminal fucose decreases and the amount of 2-O-methylfucose increases when bacteria are grown in the presence of the host plant, Phaseolus vulgaris, or its seed exudates. Insertion mutagenesis was used to identify open reading frames required for the presence of these O-methylated residues. The presence of the methylated terminal fucose required genes wreA, wreB, wreC, wreD, and wreF, whereas 2-O methylation of internal fucoses required the methyltransferase domain of bifunctional gene wreM. Mutants lacking only the methylated terminal fucose, lacking only 2-O methylation, or lacking both the methylated terminal fucose and 2-O methylation exhibited no other lipopolysaccharide structural defects. Thus, neither of these decorations is required for normal O-antigen length, transport, or assembly into the final lipopolysaccharide. This is in contrast to certain enteric bacteria in which the absence of a terminal decoration severely affects O-antigen length and transport. R. etli mutants lacking only the methylated terminal fucose were not altered in symbiosis with host Phaseolus vulgaris, whereas mutants lacking only 2-O-methylfucose exhibited a delay in nodule development during symbiosis. These results support previous conclusions that the methylated terminal fucose is dispensable for symbiosis, whereas 2-O methylation of internal fucoses somehow facilitates early events in symbiosis

Timescales for the development of methanogenesis and free gas layers in recently-deposited sediments of Arkona Basin (Baltic Sea)

Arkona Basin (southwestern Baltic Sea) is a seasonally-hypoxic basin characterized by the presence of free methane gas in its youngest organic-rich muddy stratum. Through the use of reactive transport models, this study tracks the development of the methane geochemistry in Arkona Basin as this muddy sediment became deposited during the last 8 kyr. Four cores are modeled each pertaining to a unique geochemical scenario according to their respective contemporary geochemical profiles. Ultimately the thickness of the muddy sediment and the flux of particulate organic carbon are crucial in determining the advent of both methanogenesis and free methane gas, the timescales over which methanogenesis takes over as a dominant reaction pathway for organic matter degradation, and the timescales required for free methane gas to form

Synthetic 26Al emission from galactic-scale superbubble simulations

© 2019 The Author(s).Emission from the radioactive trace element 26Al has been observed throughout the Milky Way with the COMPTEL and INTEGRAL satellites. In particular the Doppler shifts measured with INTEGRAL connect 26Al with superbubbles, which may guide 26Al flows off spiral arms in the direction of Galactic rotation. In order to test this paradigm, we have performed galaxy-scale simulations of superbubbles with 26Al injection in a Milky Way-type galaxy. We produce all-sky synthetic $\gamma-$ray emission maps of the simulated galaxies. We find that the 1809keV emission from the radioactive decay of 26Al is highly variable with time and the observer's position. This allows us to estimate an additional systematic variability of 0.2dex for a star formation rate derived from 26Al for different times and measurement locations in Milky Way-type galaxies. High-latitude morphological features indicate nearby emission with correspondingly high integrated gamma-ray intensities. We demonstrate that the 26Al scale height from our simulated galaxies depends on the assumed halo gas density. We present the first synthetic 1809keV longitude-velocity diagrams from 3D hydrodynamic simulations. The line-of-sight velocities for 26Al can be significantly different from the line-of-sight velocities associated with the cold gas. Over time, 26Al velocities consistent with the INTEGRAL observations, within uncertainties, appear at any given longitude, broadly supporting previous suggestions that 26Al injected into expanding superbubbles by massive stars may be responsible for the high velocities found in the INTEGRAL observations. We discuss the effect of systematically varying the location of the superbubbles relative to the spiral arms.Peer reviewedFinal Accepted Versio

THE ESTIMATION OF COTTON COSTS IN THE SOUTHEAST

Crop Production/Industries,

ALTERNATIVE PARAMETER SPECIFICATION IN E, V ANALYSIS: IMPLICATIONS FOR FARM LEVEL DECISION MAKING

This study compares the structure of E, V frontiers under several specifications of expected income and variance parameters with emphasis on fundamental differences in efficient crop mixes. The results are generated using data from a specific production region and a selected set of cropping activities for Wyoming. The risk-efficient frontiers and underlying crop mixes display sensitivity to alternative parameter definitions and suggest that if researchers intend to use the E, V approach in providing decision information to producers, care should be exercised in the choice of income and risk measures.Farm Management,

Accessing High Momentum States In Lattice QCD

Two measures are defined to evaluate the coupling strength of smeared interpolating operators to hadronic states at a variety of momenta. Of particular interest is the extent to which strong overlap can be obtained with individual high-momentum states. This is vital to exploring hadronic structure at high momentum transfers on the lattice and addressing interesting phenomena observed experimentally. We consider a novel idea of altering the shape of the smeared operator to match the Lorentz contraction of the probability distribution of the high-momentum state, and show a reduction in the relative error of the two-point function by employing this technique. Our most important finding is that the overlap of the states becomes very sharp in the smearing parameters at high momenta and fine tuning is required to ensure strong overlap with these states.Comment: 10 page