Design Principles for FES Concept Development

© Cranfield University 2013. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright owner.A variety of pathologies can cause injury to the spinal cord and hinder movement. A range of equipment is available to help spinal injury sufferers move their affected limbs. One method of rehabilitation is functional electrical stimulation (FES). FES is a technique where small electrical currents are applied to the surface of the user’s legs to stimulate the muscles. Studies have demonstrated the benefits of using this method and it has also been incorporated into a number of devices. The aim of the project was to produce a number of designs for a new device that uses FES technology. The project was completed in conjunction with an industrial partner. A review of the literature and consultation with industrial experts suggested a number of ways current devices could be improved. These included encouraging the user to lean forwards while walking and powering the device using a more ergonomic method. A group of designers were used to produce designs that allowed the user to walk with a more natural gait and avoided cumbersome power packs. The most effective of these designs were combined to form one design that solved both problems. A 3-dimensional model of this design was simulated using computer-aided design software. Groups of engineers, scientists and consumers were also invited to provide input on how a new device should function. Each of these groups provided a design that reflected their specific needs, depending on their experience with similar technology. Low level prototypes were produced of these designs. A group of designers were also used to design concepts for a functional electrical stimulation device based on an introduction given by industry experts. Each of the designs was presented to experienced professionals to obtain feedback. A set of guidelines were also produced during the project that instructed how to create the designs

Visual surround suppression in schizophrenia

Compared to unaffected observers patients with schizophrenia (SZ) show characteristic differences in visual perception, including a reduced susceptibility to the influence of context on judgments of contrast - a manifestation of weaker surround suppression (SS). To examine the generality of this phenomenon we measured the ability of 24 individuals with SZ to judge the luminance, contrast, orientation, and size of targets embedded in contextual surrounds that would typically influence the target's appearance. Individuals with SZ demonstrated weaker SS compared to matched controls for stimuli defined by contrast or size, but not for those defined by luminance or orientation. As perceived luminance is thought to be regulated at the earliest stages of visual processing our findings are consistent with a suppression deficit that is predominantly cortical in origin. In addition, we propose that preserved orientation SS in SZ may reflect the sparing of broadly tuned mechanisms of suppression. We attempt to reconcile these data with findings from previous studies

Binocular functional architecture for detection of contrast-modulated gratings

Combination of signals from the two eyes is the gateway to stereo vision. To gain insight into binocular signal processing, we studied binocular summation for luminance-modulated gratings (L or LM) and contrast-modulated gratings (CM). We measured 2AFC detection thresholds for a signal grating (0.75 c/deg, 216msec) shown to one eye, both eyes, or both eyes out-of-phase. For LM and CM, the carrier noise was in both eyes, even when the signal was monocular. Mean binocular thresholds for luminance gratings (L) were 5.4dB better than monocular thresholds - close to perfect linear summation (6dB). For LM and CM the binocular advantage was again 5-6dB, even when the carrier noise was uncorrelated, anti-correlated, or at orthogonal orientations in the two eyes. Binocular combination for CM probably arises from summation of envelope responses, and not from summation of these conflicting carrier patterns. Antiphase signals produced no binocular advantage, but thresholds were about 1-3dB higher than monocular ones. This is not consistent with simple linear summation, which should give complete cancellation and unmeasurably high thresholds. We propose a three-channel model in which noisy monocular responses to the envelope are binocularly combined in a contrast-weighted sum, but also remain separately available to perception via a max operator. Vision selects the largest of the three responses. With in-phase gratings the binocular channel dominates, but antiphase gratings cancel in the binocular channel and the monocular channels mediate detection. The small antiphase disadvantage might be explained by a subtle influence of background responses on binocular and monocular detection

The James Webb Space Telescope Mission

Twenty-six years ago a small committee report, building on earlier studies, expounded a compelling and poetic vision for the future of astronomy, calling for an infrared-optimized space telescope with an aperture of at least $4m$. With the support of their governments in the US, Europe, and Canada, 20,000 people realized that vision as the $6.5m$ James Webb Space Telescope. A generation of astronomers will celebrate their accomplishments for the life of the mission, potentially as long as 20 years, and beyond. This report and the scientific discoveries that follow are extended thank-you notes to the 20,000 team members. The telescope is working perfectly, with much better image quality than expected. In this and accompanying papers, we give a brief history, describe the observatory, outline its objectives and current observing program, and discuss the inventions and people who made it possible. We cite detailed reports on the design and the measured performance on orbit.Comment: Accepted by PASP for the special issue on The James Webb Space Telescope Overview, 29 pages, 4 figure

A1_4 Chickens Go In, High-performance Aircraft Come Out

This paper investigates how much thrust the plane from the film Chicken Run (2000) would require to take off. By using Mr Tweedy to scale the plane and making assumptions for the wing structure, body drag, and internal structure, a final thrust value of 18,000 N is found

A1_2 Pirelli's Plight

In this paper we calculate the amount of time an F1 car could burnout before wearingall its tyre tread off. By implementing the Archard equation using trigonometry and Newtonianmechanics, a value of time of t=30.3 s was found

A1_7 Tea at Lake Windermere

In this article, we discuss the feasibility, most efficient and, cheapest method to make tea in lake Windermere, the largest lake in the UK. Although a very unrealistic scenario, it would be possible to brew tea in the lake but at great expense. The electricity and tea prices combined would cost about 14-34 billion pounds, depending on which teas are chosen and the method used. This leads to the conclusion that although theoretically possible, practically turning lake Windermere into a lake of tea is not feasible. It would be more realistic to pick a smaller lake in the peak district for this topic