Direct Detection of Products from the Pyrolysis of 2-Phenethyl Phenyl Ether

The pyrolysis of 2-phenethyl phenyl ether (PPE, C_6H_5C_2H_4OC_6H_5) in a hyperthermal nozzle (300-1350 °C) was studied to determine the importance of concerted and homolytic unimolecular decomposition pathways. Short residence times (<100 μs) and low concentrations in this reactor allowed the direct detection of the initial reaction products from thermolysis. Reactants, radicals, and most products were detected with photoionization (10.5 eV) time-of-flight mass spectrometry (PIMS). Detection of phenoxy radical, cyclopentadienyl radical, benzyl radical, and benzene suggest the formation of product by the homolytic scission of the C_6H_5C_2H_4-OC_6H_5 and C_6H_5CH_2-CH_2OC_6H_5 bonds. The detection of phenol and styrene suggests decomposition by a concerted reaction mechanism. Phenyl ethyl ether (PEE, C_6H_5OC_2H_5) pyrolysis was also studied using PIMS and using cryogenic matrix-isolated infrared spectroscopy (matrix-IR). The results for PEE also indicate the presence of both homolytic bond breaking and concerted decomposition reactions. Quantum mechanical calculations using CBS-QB3 were conducted, and the results were used with transition state theory (TST) to estimate the rate constants for the different reaction pathways. The results are consistent with the experimental measurements and suggest that the concerted retro-ene and Maccoll reactions are dominant at low temperatures (below 1000 °C), whereas the contribution of the C_6H_5C_2H_4-OC_6H_5 homolytic bond scission reaction increases at higher temperatures (above 1000 °C)

Ignition and combustion of bulk metals under elevated, normal and reduced gravity conditions

This research effort is aimed at providing further insight into this multi-variable dependent phenomena by looking at the effects of gravity on the ignition and combustion behavior of metals. Since spacecraft are subjected to higher-than-1g gravity loads during launch and reentry and to zero-gravity environments while in orbit, the study of ignition and combustion of bulk metals at different gravitational potentials is of great practical concern. From the scientific standpoint, studies conducted under microgravity conditions provide simplified boundary conditions since buoyancy is removed, and make possible the identification of fundamental ignition mechanisms. The effect of microgravity on the combustion of bulk metals has been investigated by Steinberg, et al. on a drop tower simulator. However, no detailed quantitative work has been done on ignition phenomena of bulk metals at lower or higher-than-normal gravitational fields or on the combustion characteristics of metals at elevated gravity. The primary objective of this investigation is the development of an experimental system capable of providing fundamental physical and chemical information on the ignition of bulk metals under different gravity levels. The metals used in the study, iron (Fe), titanium (Ti), zirconium (Zr), magnesium (Mg), zinc (Zn), and copper (Cu) were selected because of their importance as elements of structural metals and their simple chemical composition (pure metals instead of multi-component alloys to avoid complication in morphology and spectroscopic studies). These samples were also chosen to study the two different combustion modes experienced by metals: heterogeneous or surface oxidation, and homogeneous or gas-phase reaction. The experimental approach provides surface temperature profiles, spectroscopic measurements, surface morphology, x-ray spectrometry of metals specimens and their combustion products, and high-speed cinematography of the heating, ignition and combustion stages of the metal specimen. This paper summarizes the results obtained to date from experiments conducted under normal and high-gravity conditions

Role of Non-Stationary Collisional Dynamics in Determining Nitric Oxide LIF Spectra

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/77182/1/AIAA-2004-389-525.pd

Nonstationary Collisional Dynamics in Determining Nitric Oxide Laser-Induced Flourescence Spectra

Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/77237/1/AIAA-8783-947.pd

Policy Feedback and the Politics of the Affordable Care Act

There is a large body of literature devoted to how “policies create politics” and how feedback effects from existing policy legacies shape potential reforms in a particular area. Although much of this literature focuses on self‐reinforcing feedback effects that increase support for existing policies over time, Kent Weaver and his colleagues have recently drawn our attention to self‐undermining effects that can gradually weaken support for such policies. The following contribution explores both self‐reinforcing and self‐undermining policy feedback in relationship to the Affordable Care Act, the most important health‐care reform enacted in the United States since the mid‐1960s. More specifically, the paper draws on the concept of policy feedback to reflect on the political fate of the ACA since its adoption in 2010. We argue that, due in part to its sheer complexity and fragmentation, the ACA generates both self‐reinforcing and self‐undermining feedback effects that, depending of the aspect of the legislation at hand, can either facilitate or impede conservative retrenchment and restructuring. Simultaneously, through a discussion of partisan effects that shape Republican behavior in Congress, we acknowledge the limits of policy feedback in the explanation of policy stability and change

Corporate governance and financial constraints on strategic turnarounds

The paper extends the Robbins and Pearce (1992) two-stage turnaround response model to include governance factors. In addition to the retrenchment and recovery, the paper proposes the addition of a realignment stage, referring specifically to the re-alignment of expectations of principal and agent groups. The realignment stage imposes a threshold that must be crossed before the retrenchment and hence recovery stage can be entered. Crossing this threshold is problematic to the extent that the interests of governance-stakeholder groups diverge in a crisis situation. The severity of the crisis impacts on the bases of strategy contingent asset valuation leading to the fragmentation of stakeholder interests. In some cases the consequence may be that management are prevented from carrying out turnarounds by governance constraints. The paper uses a case study to illustrate these dynamics, and like the Robbins and Pearce study, it focuses on the textile industry. A longitudinal approach is used to show the impact of the removal of governance constraints. The empirical evidence suggests that such financial constraints become less serious to the extent that there is a functioning market for corporate control. Building on governance research and turnaround literature, the paper also outlines the general case necessary and sufficient conditions for successful turnarounds

Validation of Computationally Efficient Simulations of Douglas Fir Pyrolysis and Combustion Using Time-Resolved Frequency Comb Laser Measurements

Computational simulations have the potential to provide low-cost, low-risk insights into wildland fire structure and dynamics. Simulation accuracy is limited, however, by the difficulty of modeling physical processes that span a wide range of spatial scales. These processes include heat transfer via radiation and turbulent advection, as well as both solid- and gas-phase chemistry. In the present study, we perform large eddy simulation (LES) with adaptive mesh refinement to model the multi-phase pyrolysis and combustion of dry Douglas fir, where temperature-based lookup tables corresponding to a multi-step pyrolysis mechanism are used to represent the composition of gas-phase pyrolysis products. Gas-phase and surface temperatures, mass loss, and water vapor mole fraction from the LES are shown to compare favorably with experimental measurements of a radiatively heated Douglas fir fuel sample undergoing pyrolysis and combustion beneath a cone calorimeter. Using frequency comb laser diagnostics, optical and infrared cameras, and a load cell, the experiments provide simultaneous in situ, time-resolved measurements of chemical composition, temperature, and mass loss. The present study thus combines cutting edge computational and experimental techniques with multi-step chemical pyrolysis modeling to provide a validated computational tool for the prediction of solid fuel pyrolysis and combustion relevant to wildland fires. &nbsp;</p

The products of the thermal decomposition of CH 3

We have used a heated 2 cm x 1 mm SiC microtubular (mu tubular) reactor to decompose acetaldehyde: CH3CHO + DELTA --&gt; products. Thermal decomposition is followed at pressures of 75 - 150 Torr and at temperatures up to 1700 K, conditions that correspond to residence times of roughly 50 - 100 mu sec in the mu tubular reactor. The acetaldehyde decomposition products are identified by two independent techniques: VUV photoionization mass spectroscopy (PIMS) and infrared (IR) absorption spectroscopy after isolation in a cryogenic matrix. Besides CH3CHO, we have studied three isotopologues, CH3CDO, CD3CHO, and CD3CDO. We have identified the thermal decomposition products CH3(PIMS), CO (IR, PIMS), H (PIMS), H2 (PIMS), CH2CO (IR, PIMS), CH2=CHOH (IR, PIMS), H2O (IR, PIMS), and HC=CH (IR, PIMS). Plausible evidence has been found to support the idea that there are at least three different thermal decomposition pathways for CH3CHO: Radical decomposition: CH3CHO + DELTA --&gt; CH3 + [HCO] --&gt; CH3 + H + CO Elimination: CH3CHO + DELTA --&gt; H2 + CH2=C=O. Isomerization/elimination: CH3CHO + DELTA --&gt; [CH2=CH-OH] --&gt; HC=CH + H2O. Both PIMS and IR spectroscopy show compelling evidence for the participation of vinylidene, CH2=C:, as an intermediate in the decomposition of vinyl alchohol: CH2=CH-OH + DELTA --&gt; [CH2=C:] + H2O --&gt; HC=CH + H2O