A short review on bimetallic Co-based catalysts for carbon dioxide reforming of methane

The development of catalysts that afford excellent catalytic performance along with high resistance toward coke accumulation is fundamental in carbon dioxide reforming of methane (CDRM). Apart from Ni-based catalysts, the Co-based catalysts gained significant attention in CDRM accredited to the Co’s capability in improving catalytic stability and lowering the coke formation. However, the lower catalytic activities of Co-based catalysts when compared to Ni-based catalysts in reforming works are the real challenges that need to be solved. In this study, a short review of various approaches that have been implemented by researchers for improving the catalytic performance issues related to Co-based catalysts is presented. This paper also presents recent Co-bimetallic catalysts approached, covers the catalyst activity as well as issues related to catalyst deactivation when compared to Co monometallic catalysts. In addition, the outlook of the related bimetallic Co-based catalysts has been proposed to provide more critical information

Catalytic Performance of La-Ni/Al2O3 Catalyst for CO2 Reforming of Ethanol

Bio-derived ethanol has been considered as an attractive and alternative feedstock for dry or steam reforming reactions to generate renewable hydrogen, which may be used for replacement of conventional fossil fuels. Ethanol dry reforming (EDR) is an environmentally-friendly process since it transforms greenhouse gas, CO2 to value-added products and ethanol can be easily obtained from biomass which is free of catalyst poisons (i.e. sulphur-containing compounds). However, there are currently limited studies regarding syngas production from EDR [1, 2]. Ni-based catalysts are commonly used for reforming reactions due to its capability of C-C bond rupture, relatively low cost and high availability compared to precious metals [2]. Nevertheless, carbonaceous deposition may considerably deteriorate catalytic activity and stability of Ni-based catalysts. La promoter reportedly hindered carbon deposition and improved catalytic activity [3]. Hence, the objective of this research was to investigate the effect of La promotion on 10%Ni/Al2O3 catalyst for EDR

Controlled Synthesis of Titania using Water-soluble Titanium Complexes: A Review

The development of human society has led to the increase in energy and resources consumption as well as the arising problems of environmental damage and the toxicity to the human health. The development of novel synthesis method which tolerates utilization of toxic solvents and chemicals would fulfill the demand of the society for safer, softer, and environmental friendly technologies. For the past decades, a remarkable progress has been attained in the development of new water-soluble titanium complexes (WSTC) and their use for the synthesis of nanocrystalline titanium dioxide materials by aqueous solution-based approaches. The progress of synthesis of nanocrystalline titanium dioxide using such WSTCs is reviewed in this work. The key structural features responsible for the successfully controlled synthesis of TiO2 are discussed to provide guidelines for the morphology-controlled synthesis. Finally, this review ends with a summary and some perspectives on the challenges as well as new directions in this fascinating research

Carbon Dioxide Dry Reforming of Glycerol for Hydrogen Production using Ni/ZrO2 and Ni/CaO as Catalysts

Glycerol, byproduct from the biodiesel production can be effectively utilized as the promising source of synthesis gas (syngas) through a dry reforming reaction. Combination of these waste materials with greenhouse gases which is carbon dioxide (CO2) will help to reduce environmental problem such as global warming. This dry reforming reaction has been carried out in a fixed bed batch reactor at 700 °C under the atmospheric pressure for 3 hours. In this experiment, reforming reaction was carried out using Nickel (Ni) as based catalyst and supported with zirconium (ZrO2) and calcium (CaO) oxides. The catalysts were prepared by wet impregnation method and characterized using Bruanaer-Emmett-Teller (BET) surface area, Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Thermo Gravimetric (TGA), and Temperature Programmed Reduction (TPR) analysis. Reaction studies show that 15% Ni/CaO give the highest hydrogen yield and glycerol conversion that peaked at 24.59% and 30.32%, respectively. This result is verified by XRD analysis where this catalyst shows low crystallinity and fine dispersion of Ni species resulted in high specific surface area which gives 44.93 m2/g that is validated by BET. 

Editorial notes for the ESPR special issue on Green Technology and Industrial Revolution 4.0 for a greener future

As the world faces unprecedented environmental challenges, it is increasingly clear that green technology is one of the most effective ways to protect our planet’s natural resources and address pressing environmental problems. Furthermore, the integration of sustainability with Industry Revolution 4.0 has the potential to revolutionize the entire environmental and chemical engineering industry. The theme of this special issue highlights the need to embed green technology and Industry 4.0 into sustainable development goals, with a particular emphasis on meeting the needs of the bottom billions in the community. Articles published in this issue offer valuable insights into how green technology can be harnessed to promote sustainable development, and how Industry 4.0 can be leveraged to drive innovation and change

Chapter 11 - Sequestration of carbon dioxide into petroleum reservoir for enhanced oil and gas recovery

This chapter presents a detailed and important study of the effectiveness of enhanced oil/gas technology in an unconventional petroleum reservoir. To meet the challenges of ever-increasing amount of greenhouse gas emissions and the long-term need for energy supplies, enhanced oil/gas recovery (EOR/EGR) techniques, which are the most appropriate approach to be used for both scientific and industrial benefits, are systematically explored. Owing to the decline of fossil energy, the global demand for energy could not be fulfilled by oil and natural gas. Generally, EOR/EGR is used to maintain critically regulated pore strength where gases (e.g., CO2, CO, N2, etc.) are injected into the petroleum reservoir through a vertical well. These techniques for oil recovery are more efficient, while primary and secondary techniques for oil recovery are inconvenient. The use of CO2 storage or EOR/EGR in oil or gas reserves is more complicated due to their significant variations in porosity and permeability. This chapter concludes with an important debate on the prospects and problems of CO2 sequestration in oil and gas reservoirs for EOR/EGR and future avenues for study

Construction of dual Z-scheme g-C3N4/Bi4Ti3O12/Bi4O5I2 heterojunction for visible and solar powered coupled photocatalytic antibiotic degradation and hydrogen production: Boosting via I−/I3− and Bi3+/Bi5+ redox mediators

© 2020 Elsevier B.V. Inspired by waste to energy production, we report construction of dual Z-scheme advanced photocatalyst g-C3N4/Bi4Ti3O12/Bi4O5I2 heterojunction for coupled photocatalytic H2 evolution and degradation of antibiotics with high efficiency. The optimal CTBT-30 i.e (40 %g-C3N4/Bi4Ti3O12)/30 % Bi4O5I2 photocatalyst exhibited an excellent rate of H2 production under visible light (56.2 mmol g−1 h−1) along with simultaneous 87.1 % ofloxacin (OFL) removal. The H2 production rate is manifolds higher than in ultrapure water, sulfadiazine, rhodamine B and higher in hole scavenging triethanolamine. The interfacial intimate coupling with well-matched energy bands, foster the charge separation with effective Z-scheme transfer facilitated by I3−/I− and Bi3+/Bi5+ and redox mediators. The scavenging of majority of holes for direct oxidation or via [rad]OH radical formation leaves photogenerated electrons (at CB of g-C3N4 and Bi4O5I2) free for H2 evolution from H2O. Such work is promising for designing high photo-absorbing heterojunction photocatalysts for dual functionalities of clean energy production and environmental detoxification

Amorphous structure in Cu-Zn-V-Al oxide composite catalyst for methanol reforming

Cu-Zn-V-Al oxide composite catalysts were prepared using a co-precipitation method to investigate hydrogen and carbon monoxide yield of a methanol reforming reaction. The mass compositions of metals were initially determined on the Simplex Centroid statistical design. The effects of various metal compositions on the physicochemical properties of the catalyst were studied via X-ray diffractogram (XRD), temperature-programmed reduction (TPR) analyses, and reaction. XRD revealed crystals in the samples. Crystalline CuO in Cu30V30Al40 formed with the addition of zinc oxide at the metal loading below 30 wt%. A combination of zinc oxide and vanadia, however, had no Zn-V complex crystal but its scanning electron microscopy image showed the formation of string structures (AS). The catalyst that contained the AS exhibited a broad hydrogen reduction peak in the TPR analysis. Vanadium at a loading below 40 wt% with various zinc and cuprum compositions also formed small ASs and exhibited single TPR peaks. A reaction yield study revealed the optimum compositions of metal oxides when the data was fitted by response surface plots. The catalysts with high content of AS were not at the peaks however. Cu-Zn based catalysts showed the highest hydrogen yield for the reaction temperature of between 150 oC to 225 oC and vanadia-promoted catalyst with AS only appeared to be the optimum catalyst at the higher temperature