765 research outputs found
Variation in the seston C:N ratio of the Arctic Ocean and pan-Arctic shelves
Studying more than 3600 observations of particulate organic carbon (POC) and particulate organic nitrogen (PON), we evaluate the applicability of the classic Redfield C:N ratio (6.6) and the recently proposed Sterner ratio (8.3) for the Arctic Ocean and pan-Arctic shelves. The confidence intervals for C:N ranged from 6.43 to 8.82, while the average C:N ratio for all observations was 7.4. In general, neither the Redfield or Sterner ratios were applicable, with the Redfield ratio being too low and the Sterner ratio too high. On a regional basis, all northern high latitude regions had a C:N ratio significantly higher than the Redfield ratio, except the Arctic Ocean (6.6), Chukchi (6.4) and East Siberian (6.5) Seas. The latter two regions were influenced by nutrient-rich Pacific waters, and had a high fraction of autotrophic (i.e. algal-derived) material. The C:N ratios of the Laptev (7.9) and Kara (7.5) Seas were high, and had larger contributions of terrigenous material. The highest C:N ratios were in the North Water (8.7) and Northeast Water (8.0) polynyas, and these regions were more similar to the Sterner ratio. The C:N ratio varied between regions, and was significantly different between the Atlantic (6.7) and Arctic (7.9) influenced regions of the Barents Sea, while the Atlantic dominated regions (Norwegian, Greenland and Atlantic Barents Seas) were similar (6.7–7). All observations combined, and most individual regions, showed a pattern of decreasing C:N ratios with increasing seston concentrations. This meta-analysis has important implications for ecosystem modelling, as it demonstrated the striking temporal and spatial variability in C:N ratios and challenges the common assumption of a constant C:N ratio. The non-constant stoichiometry was believed to be caused by variable contributions of autotrophs, heterotrophs and detritus to seston, and a significant decrease in C:N ratios with increasing Chlorophyll a concentrations supports this view. This study adds support to the use of a power function model, where the exponent is system-specific, but we suggest a general Arctic relationship, where POC = 7.4 PON0.89
Learning and loving of nature in the Anthropocene: How to broaden science with curiosity and passion
What does “belonging to nature” mean today and how can children and young people be inspired to experience this? What basic dilemmas and challenges arise between the requirement for critical thinking on the one side, and the experience of belonging and coexisting in nature on the other? In this article we will scrutinize the ideal of rational arguments and norms as stated in current policy documents and discuss how this best can promote curiosity and wonder, as well as a sense of relatedness and responsibility with nature that can inspire normative actions, We claim that critical thinking informed by a value-based ecology is needed to reveal the hidden curriculum of sustainable education; that is, a loss of “holistic” view in the footsteps of scientific diversification, a lack of curiosity and training of critical thinking, and a “denial of nature” characterized by a missed opportunity to raise the urgent attention towards environmental risks, that today should be a main mission in natural science education
A New, Highly Conductive, Lithium Salt/Nonionic Surfactant, Lyotropic Liquid-Crystalline Mesophase and Its Application
Cataloged from PDF version of article.Salty water! Lithium salts (LiCl, LiNO3, and LiClO4) at very high concentrations in water form lyotropic liquid crystalline (LLC) mesophases with a nonionic surfactant (10-lauryl ether) and display high ionic conductivities (10−2–10−4 S cm−1) over a broad temperature range (−10 to 80 °C) with excellent behavior as gel electrolytes in electrochemical applications
Origin of Lyotropic Liquid Crystalline Mesophase Formation and Liquid Crystalline to Mesostructured Solid Transformation in the Metal Nitrate Salt-Surfactant Systems
Cataloged from PDF version of article.The zinc nitrate salt acts as a solvent in the ZnX-C(12)EO(10) (ZnX is [Zn(H(2)O)(6)](NO(3))(2) and C(12)EO(10) is C(12)H(25)(OCH(2)CH(2))(10)OH) lyotropic liquid crystalline (LLC) mesophase with a drastic dropping on the melting point of ZnX. The salt surfactant LLC mesophase is stable down to -52 degrees C and undergoes a phase change into a solid mesostructured salt upon cooling below -52 degrees C; no phase separation is observed down to -190 degrees C. The ZnX-C(12)EO(10) mesophase displays a usual phase behavior with an increasing concentration of the solvent (ZnX) in the media with an order of bicontinuous cubic(V(1))-2D hexagonal(H(1)) - a mixture of 2D hexagonal and micelle cubic(H(1) + I)-micelle cubic(I)-micelle(L(1)) phases. The phase behaviors, specifically at low temperatures, and the first phase diagram of the ZnX-C(12)EO(10) system was investigated using polarized optical microscopy (POM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), and Raman techniques and conductivity measurements
Effect of Hygroscopicity of the Metal Salts on the Formation and Air Stability of Lyotropic Liquid Crystalline Mesophases in Hydrated Salt-Surfactant Systems
Cataloged from PDF version of article.It is known that alkali, transition metal and lanthanide salts can form lyotropic liquid crystalline (LLC) mesophases with non-ionic surfactants (such as CiH2i+1(OCH2CH2)(j)OH, denoted as CiEj). Here we combine several salt systems and show that the percent deliquescence relative humidity (%DRH) value of a salt is the determining parameter in the formation and stability of the mesophases and that the other parameters are secondary and less significant. Accordingly, salts can be divided into 3 categories: Type I salts (such as LiCl, LiBr, LiI, LiNO3, LiClO4, CaCl2, Ca(NO3)(2), MgCl2, and some transition metal nitrates) have low %DRH and form stable salt-surfactant LLC mesophases in the presence of a small amount of water, type II salts (such as some sodium and potassium salts) that are moderately hygroscopic form disordered stable mesophases, and type III salts that have high %DRH values, do not form stable LLC mesophases and leach out salt crystals. To illustrate this effect, a large group of salts from alkali and alkaline earth metals were investigated using XRD, POM, FTIR, and Raman techniques. Among the different salts investigated in this study, the LiX (where X is Cl-, Br-, I-, NO3-, and ClO4-) and CaX2 (X is Cl-, and NO3-) salts were more prone to establish LLC mesophases because of their lower %DRH values. The phase behavior with respect to concentration, stability, and thermal behavior of Li(I) systems were investigated further. It is seen that the phase transitions among different anions in the Li(I) systems follow the Hofmeister series. (C) 2014 Elsevier Inc. All rights reserved
Molten-Salt-Assisted Self-Assembly (MASA)-Synthesis Mesoporous Metal Titanate-Titania, Metal Sulfide-Titania, and Metal Selenide-Titania Thin Films
Cataloged from PDF version of article.New synthetic strategies are needed for the assembly of porous metal titanates and metal chalcogenite-titania thin films for various energy applications. Here, a new synthetic approach is introduced in which two solvents and two surfactants are used. Both surfactants are necessary to accommodate the desired amount of salt species in the hydrophilic domains of the mesophase. The process is called a molten-salt-assisted self-assembly (MASA) because the salt species are in the molten phase and act as a solvent to assemble the ingredients into a mesostructure and they react with titania to form mesoporous metal titanates during the annealing step. The mesoporous metal titanate (meso-Zn2TiO4 and meso-CdTiO3) thin films are reacted under H2S or H2Se gas at room temperature to yield high quality transparent mesoporous metal chalcogenides. The H2Se reaction produces rutile and brookite titania phases together with nanocrystalline metal selenides and H2S reaction of meso-CdTiO3 yields nanocrystalline anatase and CdS in the spatially confined pore walls. Two different metal salts (zinc nitrate hexahydrate and cadmium nitrate tetrahydrate) are tested to demonstrate the generality of the new assembly process. The meso-TiO2-CdSe film shows photoactivity under sunlight
A Comparative study of O2 adsorbed carbon nanotubes
Cataloged from PDF version of article.First-principles, density functional calculations show that O-2 adsorbed single-wall carbon nanotubes (SWNT) show dramatic differences depending on the type of the tube. Upon O-2 physisorption, the zig-zag SWNT remains semiconducting, while the metallicity of the armchair is lifted for the spin-down bands. The spin-up bands continue to cross at the Fermi level, and make the system metallic only for one type of spin. The singlet bound state of O-2 occurs at the bridge site of the (6, 6) SWNT at small distance from the surface of the tube. However, for the hollow site, the molecule dissociates when it comes close to the surface. (C) 2003 Elsevier B.V. All rights reserved
- …