Relationships of trace gases and aerosols and the emission characteristics at Lin'an, a rural site in eastern China, during spring 2001

We present measurements of trace gases and fine aerosols obtained from a rural site in eastern China during 18 February to 30 April 2001. The field program aimed to characterize the variations in aerosol and gaseous pollutant concentrations and the emission signatures from the inland region of eastern China in the spring season. The data included O3, CO, NO, NOy*, SO2, methane, C2-C8 nonmethane hydrocarbons (NMHCs), C 1-C2 halocarbons, and the chemical composition of PM2.5. The average hourly mixing ratios (±standard deviation) of CO, SO2, and NOy* were 677 (±315) ppbv, 15.9 (±14.6) ppbv, and 13.8 (±7.2) ppbv, respectively. The mean daytime ozone mixing ratio was 41 (± 19) ppbv. The most abundant NMHC was ethane (3189 ± 717 pptv), followed by ethyne (2475 ± 1395 pptv), ethene (1679 ± 1455 pptv), and toluene (1529 ± 1608 pptv). Methyl chloride was the most abundant halocarbon (1108 ± 653 pptv). The average concentrations of particulate organic matter (POM, as organic carbon, OC, times 1.4) and elemental carbon (EC) in PM2.5 were 21.5 (±7) μg/m3 and 2.5 (±0.7) μg/m3, respectively, and sulfate and nitrate levels were 17.3 (±6.6) and 6.5 (±4) μg/m3, respectively. CO showed moderate to good correlation with NOy* (r2 = 0.59), OC (r2 = 0.65), CH3Cl (r2 = 0.59), soluble potassium (r2 = 0.53), and many NMHCs, indicating contributions from the burning of biofuel/biomass. CO also correlated with an industrial tracer, C2Cl4, indicative of some influence from industrial sources. SO2, on the other hand, correlated well with EC (r2 = 0.56), reflecting the contribution from the burning of coal. Ammonium was sufficiently abundant to fully neutralize sulfate and nitrate, indicating that there were strong emissions of ammonia from agricultural activities. Silicon and calcium had poor correlations with iron and aluminum, revealing the presence of source(s) for Si and Ca other than from soil. Examination of C2H2/CO, C3H8/C 2H6, nitrate/(nitrate + NOy* , and sulfate/(SO2 + sulfate) suggested that relatively fresh air masses had been sampled at the study site in the spring season. Comparison of the observed ratios/slopes with those derived from emission inventories showed that while the observed SO2/NO y* ratio (1.29 ppbv/ppbv) in March was comparable (within 20%) to the inventory-derived ratio for the study region, the measured CO/NOy* slope (37 ppbv/ppbv) was about 200% larger. The observed slope of CO relative to NMHC (including ethane, propane, butanes, ethene, and ethyne) also indicated the presence of excess CO, compared to the ratios from the inventories. These results strongly suggest that emissions of CO in eastern China have been underrepresented. The findings of this study highlight the importance of characterizing trace gases and aerosols within source regions of the Asian continent. The springtime results were also compared with data previously collected at the site in 1999-2000 and with those obtained on the Transport and Chemical Evolution over the Pacific (TRACE-P) aircraft and from a coastal site in South China for the same study period. Copyright 2004 by the American Geophysical Union

Superpixel-based Two-view Deterministic Fitting for Multiple-structure Data

This paper proposes a two-view deterministic geometric model fitting method, termed Superpixel-based Deterministic Fitting (SDF), for multiple-structure data. SDF starts from superpixel segmentation, which effectively captures prior information of feature appearances. The feature appearances are beneficial to reduce the computational complexity for deterministic fitting methods. SDF also includes two original elements, i.e., a deterministic sampling algorithm and a novel model selection algorithm. The two algorithms are tightly coupled to boost the performance of SDF in both speed and accuracy. Specifically, the proposed sampling algorithm leverages the grouping cues of superpixels to generate reliable and consistent hypotheses. The proposed model selection algorithm further makes use of desirable properties of the generated hypotheses, to improve the conventional fit-and-remove framework for more efficient and effective performance. The key characteristic of SDF is that it can efficiently and deterministically estimate the parameters of model instances in multi-structure data. Experimental results demonstrate that the proposed SDF shows superiority over several state-of-the-art fitting methods for real images with single-structure and multiple-structure data.Comment: Accepted by European Conference on Computer Vision (ECCV

Constraints on Asian and European sources of methane from Ch 4-C2H6-CO correlations in Asian outflow

Aircraft observations of Asian outflow from the Transport and Chemical Evolution Over the Pacific (TRACE-P) aircraft mission over the NW Pacific (March and April 2001) show large CH4 enhancements relative to background, as well as strong CH4-C2H 6-CO correlations that provide signatures of regional sources. We apply a global chemical transport model simulation of the CH4-C2H6-CO system for the TRACE-P period to interpret these observations in terms of CH4 sources and to explore in particular the unique constraints from the CH 4-C2H6-CO correlations. We use as a priori a global CH4 source inventory constrained with National Oceanic and Atmospheric Administration (NOAA) Climate Monitoring and Diagnostics Laboratory (CMDL) surface observations [Wang et al., 2004]. We find that the observed CH4 concentration enhancements and CH4-C2H6-CO correlations in Asian outflow in TRACE-P are deterinined mainly by anthropogenic emissions from China and Eurasia (defined here as Europe and eastern Russia), with only little contribution from tropical sources (wetlands and biomass burning). The a priori inventory overestimates the observed CH4 enhancements and shows regionally variable biases for the CH4/C2H6 slope. The CH 4/CO slopes are simulated without significant bias. Matching both the observed CH4 enhancements and the CH 4-C2H6-CO slopes in Asian outflow requires increasing the east Asian anthropogenic source of CH 4, and decreasing the Eurasian anthropogenic source, by at least 30% for both. The need to increase the east Asian source is driven by the underestimate of the CH4/C2H 6 slope in boundary layer Chinese outflow. The Streets et al. [2003] anthropogenic emission inventory for east Asia fits this constraint by increasing CH4 emissions from that region by 40% relative to the a priori, largely because of higher livestock and landfill source estimates. Eurasian sources (mostly European) then need to be reduced by 30-50% from the a priori value of 68 Tg yr -1. The decrease of European sources could result in part from recent mitigation of emissions from coal mining and landfills. Copyright 2004 by the American Geophysical Union

Hybrid Focal Stereo Networks for Pattern Analysis in Homogeneous Scenes

In this paper we address the problem of multiple camera calibration in the presence of a homogeneous scene, and without the possibility of employing calibration object based methods. The proposed solution exploits salient features present in a larger field of view, but instead of employing active vision we replace the cameras with stereo rigs featuring a long focal analysis camera, as well as a short focal registration camera. Thus, we are able to propose an accurate solution which does not require intrinsic variation models as in the case of zooming cameras. Moreover, the availability of the two views simultaneously in each rig allows for pose re-estimation between rigs as often as necessary. The algorithm has been successfully validated in an indoor setting, as well as on a difficult scene featuring a highly dense pilgrim crowd in Makkah.Comment: 13 pages, 6 figures, submitted to Machine Vision and Application

Nanofibers Fabricated Using Triaxial Electrospinning as Zero Order Drug Delivery Systems

A new strategy for creating functional trilayer nanofibers through triaxial electrospinning is demonstrated. Ethyl cellulose (EC) was used as the filament-forming matrix in the outer, middle, and inner working solutions and was combined with varied contents of the model active ingredient ketoprofen (KET) in the three fluids. Triaxial electrospinning was successfully carried out to generate medicated nanofibers. The resultant nanofibers had diameters of 0.74 ± 0.06 μm, linear morphologies, smooth surfaces, and clear trilayer nanostructures. The KET concentration in each layer gradually increased from the outer to the inner layer. In vitro dissolution tests demonstrated that the nanofibers could provide linear release of KET over 20 h. The protocol reported in this study thus provides a facile approach to creating functional nanofibers with sophisticated structural features

TIFA, an inflammatory signaling adaptor, is tumor suppressive for liver cancer.

TIFA (TNF receptor associated factor (TRAF)-interacting protein with a Forkhead-associated (FHA) domain), also called T2BP, was first identified using a yeast two-hybrid screening. TIFA contains a FHA domain, which directly binds phosphothreonine and phosphoserine, and a consensus TRAF6-binding motif. TIFA-mediated oligomerization and poly-ubiquitinylation of TRAF6 mediates signaling downstream of the Tumor necrosis factor alpha receptor 1 (TNFaR-I) and interleukin-1/Toll-like receptor 4 (TLR4) pathways. Examining TIFA expression in hepatocellular carcinoma (HCC) tissues microarrays, we noted marked decreases TIFA reactivity in tumor versus control samples. In agreement, we found that HCC cell lines show reduced TIFA expression levels versus normal liver controls. Reconstituting TIFA expression in HCC cell lines promoted two independent apoptosis signaling pathways: the induction of p53 and cell cycle arrest, and the activation of caspase-8 and caspase-3. In contrast, the expression of a non-oligomerizing mutant of TIFA impacted cells minimally, and suppression of TIFA expression protected cells from apoptosis. Mice bearing TIFA overexpression hepatocellular xenografts develop smaller tumors versus TIFA mutant tumors; terminal deoxynucleotidyl transferase dUTP nick end labeling staining demonstrates increased cell apoptosis, and decreased proliferation, reflecting cell cycle arrest. Interestingly, p53 has a greater role in decreased proliferation than cell death, as it appeared dispensable for TIFA-induced cell killing. The findings demonstrate a novel suppressive role of TIFA in HCC progression via promotion of cell death independent of p53

Collaborative research and development (R&D) for climate technology transfer and uptake in developing countries: Towards a needs driven approach

While international cooperation to facilitate the transfer and uptake of climate technologies in developing countries is an ongoing part of climate policy conversations, international collaborative R&D has received comparatively little attention. Collaborative R&D, however, could be a potentially important contributor to facilitating the transfer and uptake of climate technologies in developing countries. But the complexities of international collaborative R&D options and their distributional consequences have been given little attention to date. This paper develops a systematic approach to informing future empirical research and policy analysis on this topic. Building on insights from relevant literature and analysis of empirical data based on a sample of existing international climate technology R&D initiatives, three contributions are made. First, the paper analyses the coverage of existing collaborative R&D efforts in relation to climate technologies, highlighting some important concerns, such as a lack of coverage of lower-income countries or adaptation technologies. Second, it provides a starting point for further systematic research and policy thinking via the development of a taxonomic approach for analysing collaborative designs. Finally, it matches characteristics of R&D collaborations against developing countries’ climate technology needs to provide policymakers with guidance on how to Configure R&D collaborations to meet these needs

Electrospun pH-sensitive core-shell polymer nanocomposites fabricated using a tri-axial process

A modified tri-axial electrospinning process was developed for the generation of a new type of pH-sensitive polymer/lipid nanocomposite. The systems produced are able to promote both dissolution and permeation of a model poorly water-soluble drug. First, we show that it is possible to run a tri-axial procress with only one of the three fluids being electrospinnable. Using an electrospinnable middle fluid of Eudragit S100 (ES100) with pure ethanol as the outer solvent and an unspinnable lecithin-diclofenac sodium (PL-DS) core solution, nanofibers with linear morphology and clear core/shell structures can be fabricated continuously and smoothly. X-ray diffraction proved that these nanofibers are structural nanocomposites with the drug present in an amorphous state. In vitro dissolution tests demonstrated that the formulations could preclude release in acidic conditions, and that the drug was released from the fibers in two successive steps at neutral pH. The first step is the dissolution of the shell ES100 and the conversion of the core PL-DS into sub-micron sized particles. This frees some DS into solution, and later the remaining DS is gradually released from the PL-DS particles through diffusion. Ex vivo permeation results showed that the composite nanofibers give a more than two-fold uplift in the amount of DS passing through the colonic membrane as compared to pure DS; 74% of the transmitted drug was in the form of PL-DS particles. The new tri-axial electrospinning process developed in this work provides a platform to fabricate structural nanomaterials, and the core-shell polymer-PL nanocomposites we have produced have significant potential applications for oral colon-targeted drug delivery. STATEMENT OF SIGNIFICANCE: A modified tri-axial electrospinning is demonstrated to create a new type of core-shell pH-sensitive polymer/lipid nanocomposites, in which an electrospinnable middle fluid is exploited to support the un-spinnable outer and inner fluids. The structural nanocomposites are able to provide a colon-targeted sustained release and an enhanced permeation performance of diclofenac sodium. The developed tri-axial process can provide a platform for fabricating new structural nanomaterials with high quality. The strategy of a combined usage of polymeric excipients and phosphilipid in a core-shell format should provide new possibilities of developing novel drug delivery systems for efficacious oral administration of poorly-water soluble drugs

Evaluating regional emission estimates using the TRACE-P observations

Measurements obtained during the NASA Transport and Chemical Evolution over the Pacific (TRACE-P) experiment are used in conjunction with regional modeling analysis to evaluate emission estimates for Asia. A comparison between the modeled values and the observations is one method to evaluate emissions. Based on such analysis it is concluded that the inventory performs well for the light alkanes, CO, ethyne, SO2, and NOₓ. Furthermore, based on model skill in predicting important photochemical species such as O₃, HCHO, OH, HO₂, and HNO₃, it is found that the emissions inventories are of sufficient quality to support preliminary studies of ozone production. These are important finding in light of the fact that emission estimates for many species (such as speciated NMHCs and BC) for this region have only recently been estimated and are highly uncertain. Using a classification of the measurements built upon trajectory analysis, we compare observed species distributions and ratios of species to those modeled and to ratios estimated from the emissions inventory. It is shown that this technique can reconstruct a spatial distribution of propane/benzene that looks remarkably similar to that calculated from the emissions inventory. A major discrepancy between modeled and observed behavior is found in the Yellow Sea, where modeled values are systematically underpredicted. The integrated analysis suggests that this may be related to an underestimation of emissions from the domestic sector. The emission is further tested by comparing observed and measured species ratios in identified megacity plumes. Many of the model derived ratios (e.g., BC/CO, SOₓ/C₂H₂) fall within ∼25% of those observed and all fall outside of a factor of 2.5. (See Article file for details of the abstract.)Department of Civil and Environmental EngineeringAuthor name used in this publication: Wang, T