SOME ASPECTS OF ENERGY SAVING OF BURDEN MATERIAL IN THE BLAST FURNACE

To determine the possibility of self-stabilization effect for burden surface texture and gas flow in operating blast furnace under the proper conditions was experimentally proved for the first time, as well as the reasons of the effect disruption

Assessment of interatomic potentials for atomistic analysis of static and dynamic properties of screw dislocations in W

Screw dislocations in bcc metals display non-planar cores at zero temperature which result in high lattice friction and thermally activated strain rate behavior. In bcc W, electronic structure molecular statics calculations reveal a compact, non-degenerate core with an associated Peierls stress between 1.7 and 2.8 GPa. However, a full picture of the dynamic behavior of dislocations can only be gained by using more efficient atomistic simulations based on semiempirical interatomic potentials. In this paper we assess the suitability of five different potentials in terms of static properties relevant to screw dislocations in pure W. As well, we perform molecular dynamics simulations of stress-assisted glide using all five potentials to study the dynamic behavior of screw dislocations under shear stress. Dislocations are seen to display thermally-activated motion in most of the applied stress range, with a gradual transition to a viscous damping regime at high stresses. We find that one potential predicts a core transformation from compact to dissociated at finite temperature that affects the energetics of kink-pair production and impacts the mechanism of motion. We conclude that a modified embedded-atom potential achieves the best compromise in terms of static and dynamic screw dislocation properties, although at an expense of about ten-fold compared to central potentials

Energy Distribution of a Stringy Charged Black Hole

The energy distribution associated with a stringy charged black hole is studied using M{\o}ller's energy-momentum complex. Our result is reasonable and it differs from that known in literature using Einstein's energy-momentum complex.Comment: Latex, no figure

Vapor-phase synthesis, growth mechanism and thickness-independent elastic modulus of single-crystal tungsten nanobelts

Single-crystal tungsten nanobelts with thicknesses from tens to hundreds of nanometers, widths of several micrometers and lengths of tens of micrometers were synthesized using chemical vapor deposition. Surface energy minimization was believed to have played a crucial role in the growth of the synthesized nanobelts enclosed by the low-energy {110} crystal planes of body-centered-cubic structure. The anisotropic growth of the crystallographically equivalent {110} crystal planes could be attributable to the asymmetric concentration distribution of the tungsten atom vapor around the nanobelts during the growth process. The elastic moduli of the synthesized tungsten nanobelts with thicknesses ranging from 65 to 306 nm were accurately measured using a newly developed thermal vibration method. The measured modulus values of the tungsten nanobelts were thickness-dependent. After eliminating the effect of surface oxidization using a core-shell model, the elastic modulus of tungsten nanobelts became constant, which is close to that of the bulk tungsten value of 410 GPa

The influence of transition metal solutes on dislocation core structure and values of Peierls stress and barrier in tungsten

Several transition metals were examined to evaluate their potential for improving the ductility of tungsten. The dislocation core structure and Peierls stress and barrier of $1/2$ screw dislocations in binary tungsten-transition metal alloys (W$_{1-x}$TM$_{x}$) were investigated using first principles electronic structure calculations. The periodic quadrupole approach was applied to model the structure of $1/2$ dislocation. Alloying with transition metals was modeled using the virtual crystal approximation and the applicability of this approach was assessed by calculating the equilibrium lattice parameter and elastic constants of the tungsten alloys. Reasonable agreement was obtained with experimental data and with results obtained from the conventional supercell approach. Increasing the concentration of a transition metal from the VIIIA group, i.e. the elements in columns headed by Fe, Co and Ni, leads to reduction of the $C^\prime$ elastic constant and increase of elastic anisotropy A=$C_{44}/C^\prime$. Alloying W with a group VIIIA transition metal changes the structure of the dislocation core from symmetric to asymmetric, similar to results obtained for W$_{1-x}$Re$_{x}$ alloys in the earlier work of Romaner {\it et al} (Phys. Rev. Lett. 104, 195503 (2010))\comments{\cite{WRECORE}}. In addition to a change in the core symmetry, the values of the Peierls stress and barrier are reduced. The latter effect could lead to increased ductility in a tungsten-based alloy\comments{\cite{WRECORE}}. Our results demonstrate that alloying with any of the transition metals from the VIIIA group should have similar effect as alloying with Re.Comment: 12 pages, 8 figures, 3 table

Evolutionary history of endogenous Human Herpesvirus 6 reflects human migration out of Africa

Human herpesvirus 6A and 6B (HHV-6) can integrate into the germline, and as a result, ∼70 million people harbor the genome of one of these viruses in every cell of their body. Until now, it has been largely unknown if 1) these integrations are ancient, 2) if they still occur, and 3) whether circulating virus strains differ from integrated ones. Here, we used next-generation sequencing and mining of public human genome data sets to generate the largest and most diverse collection of circulating and integrated HHV-6 genomes studied to date. In genomes of geographically dispersed, only distantly related people, we identified clades of integrated viruses that originated from a single ancestral event, confirming this with fluorescent in situ hybridization to directly observe the integration locus. In contrast to HHV-6B, circulating and integrated HHV-6A sequences form distinct clades, arguing against ongoing integration of circulating HHV-6A or “reactivation” of integrated HHV-6A. Taken together, our study provides the first comprehensive picture of the evolution of HHV-6, and reveals that integration of heritable HHV-6 has occurred since the time of, if not before, human migrations out of Africa

Evolutionary History of Endogenous Human Herpesvirus 6 Reflects Human Migration out of Africa.

Human herpesvirus 6A and 6B (HHV-6) can integrate into the germline, and as a result, ∼70 million people harbor the genome of one of these viruses in every cell of their body. Until now, it has been largely unknown if 1) these integrations are ancient, 2) if they still occur, and 3) whether circulating virus strains differ from integrated ones. Here, we used next-generation sequencing and mining of public human genome data sets to generate the largest and most diverse collection of circulating and integrated HHV-6 genomes studied to date. In genomes of geographically dispersed, only distantly related people, we identified clades of integrated viruses that originated from a single ancestral event, confirming this with fluorescent in situ hybridization to directly observe the integration locus. In contrast to HHV-6B, circulating and integrated HHV-6A sequences form distinct clades, arguing against ongoing integration of circulating HHV-6A or "reactivation" of integrated HHV-6A. Taken together, our study provides the first comprehensive picture of the evolution of HHV-6, and reveals that integration of heritable HHV-6 has occurred since the time of, if not before, human migrations out of Africa