8,861 research outputs found
Lightweight nickel electrode for nickel hydrogen cells and batteries
The nickel electrode was identified as the heaviest component of the nickel hydrogen (NiH2) battery. The NASA Lewis Research Center is developing nickel electrodes for NiH2 battery devices which will be lighter in weight and have higher energy densities when cycled under a low Earth orbit regime at deep depths of discharge. Lightweight plaques are first exposed to 31 percent potassium hydroxide for 3 months to determine their suitability for use as electrode substrates from a chemical corrosion standpoint. Pore size distribution and porosity of the plaques are then measured. The lightweight plaques examined are nickel foam, nickel felt, nickel plastic and nickel plated graphite. Plaques are then electrochemically impregnated in an aqueous solution. Initial characterization tests of the impregnated plaques are performed at five discharge levels, C/2, 1.0 C, 1.37 C, 2.0C, and 2.74 C rates. Electrodes that passed the initial characterization screening test will be life cycle tested. Lightweight electrodes are approximately 30 to 50 percent lighter in weight than the sintered nickel electrode
Electrolyte management in porous battery components. Static measurements
The interaction between the porous hydrogen and nickel electrodes and microporous separator with respect to electrolyte management in nickel/hydrogen cells has been investigated. The distribution of electrolyte among the components has been measured and correlated with the pore size distributions, total void volume, and resistance of a variety of electrodes and separators. Calculations are used to show the effects of systematically varying these properties
Pore size engineering applied to the design of separators for nickel-hydrogen cells and batteries
Pore size engineering in starved alkaline multiplate cells involves adopting techniques to widen the volume tolerance of individual cells. Separators with appropriate pore size distributions and wettability characteristics (capillary pressure considerations) to have wider volume tolerances and an ability to resist dimensional changes in the electrodes were designed. The separators studied for potential use in nickel-hydrogen cells consist of polymeric membranes as well as inorganic microporous mats. In addition to standard measurements, the resistance and distribution of electrolyte as a function of total cell electrolyte content were determined. New composite separators consisting of fibers, particles and/or binders deposited on Zircar cloth were developed in order to engineer the proper capillary pressure characteristics in the separator. These asymmetric separators were prepared from a variety of fibers, particles and binders
Development of a lightweight nickel electrode
Nickel electrodes made using lightweight plastic plaque are about half the weight of electrodes made from state of the art sintered nickel plaque. This weight reduction would result in a significant improvement in the energy density of batteries using nickel electrodes (nickel hydrogen, nickel cadmium and nickel zinc). These lightweight electrodes are suitably conductive and yield comparable capacities (as high as 0.25 AH/gm (0.048 AH/sq cm)) after formation. These lightweight electrodes also show excellent discharge performance at high rates
Recent advances in Ni-H2 technology at NASA Lewis Research Center
The NASA Lewis Research Center has concentrated its efforts on advancing the Ni-H2 system technology for low Earth orbit applications. Component technology as well as the design principles were studied in an effort to understand the system behavior and failure mechanisms in order to increase performance and extend cycle life. The design principles were previously addressed. The component development is discussed, in particular the separator and nickel electrode and how these efforts will advance the Ni-H2 system technology
Electrostatics of Gapped and Finite Surface Electrodes
We present approximate methods for calculating the three-dimensional electric
potentials of finite surface electrodes including gaps between electrodes, and
estimate the effects of finite electrode thickness and an underlying dielectric
substrate. As an example we optimize a radio-frequency surface-electrode ring
ion trap, and find that each of these factors reduces the trapping secular
frequencies by less than 5% in realistic situations. This small magnitude
validates the usual assumption of neglecting the influences of gaps between
electrodes and finite electrode extent.Comment: 9 pages, 9 figures (minor changes
Loss of genetic integrity and biological invasions result from stocking and introductions of Barbus barbus: Insights from rivers in England
Anthropogenic activities, including the intentional releases of fish for enhancing populations (stocking), are recognized as adversely impacting the adaptive potential of wild populations. Here, the genetic characteristics of European barbel Barbus barbus were investigated using 18 populations in England, where it is indigenous to eastern-flowing rivers and where stocking has been used to enhance these populations. Invasive populations are also present in western-flowing rivers following introductions of translocated fish. Two genetic clusters were evident in the indigenous range, centered on catchments in northeast and southeast England. However, stocking activities, including the release of hatchery-reared fish, have significantly reduced the genetic differentiation across the majority of this range. In addition, in smaller indigenous rivers, populations appeared to mainly comprise fish of hatchery origin. In the nonindigenous range, genetic data largely aligned to historical stocking records, corroborating information that one particular river (Kennet) in southeast England was the original source of most invasive B. barbus in England. It is recommended that these genetic outputs inform management measures to either restore or maintain the original genetic diversity of the indigenous rivers, as this should help ensure populations can maintain their ability to adapt to changing environmental conditions. Where stocking is considered necessary, it is recommended that only broodstock from within the catchment is used
The Birth of a Galaxy - III. Propelling reionisation with the faintest galaxies
Starlight from galaxies plays a pivotal role throughout the process of cosmic
reionisation. We present the statistics of dwarf galaxy properties at z > 7 in
haloes with masses up to 10^9 solar masses, using a cosmological radiation
hydrodynamics simulation that follows their buildup starting with their
Population III progenitors. We find that metal-enriched star formation is not
restricted to atomic cooling ( K) haloes, but can occur
in haloes down to masses ~10^6 solar masses, especially in neutral regions.
Even though these smallest galaxies only host up to 10^4 solar masses of stars,
they provide nearly 30 per cent of the ionising photon budget. We find that the
galaxy luminosity function flattens above M_UV ~ -12 with a number density that
is unchanged at z < 10. The fraction of ionising radiation escaping into the
intergalactic medium is inversely dependent on halo mass, decreasing from 50 to
5 per cent in the mass range . Using our galaxy
statistics in a semi-analytic reionisation model, we find a Thomson scattering
optical depth consistent with the latest Planck results, while still being
consistent with the UV emissivity constraints provided by Ly forest
observations at z = 4-6.Comment: 21 pages, 15 figures, 4 tables. Accepted in MNRA
- …