Frequency domain analysis of lightning protection using four lightning protection rods

In this paper the lightning discharge channel is modeled as a vertical monopole antenna excited by a pulse generator at its base. The lightning electromagnetic field of a nearby lightning discharge in the case of lightning protection using four vertical lightning protection rods was determined in the frequency domain. Unknown current distributions were determined by numerical solving of a system of integral equations of two potentials using the Point Matching Method and polynomial approximation of the current distributions. The influence of the real ground, treated as homogeneous loss half-space of known electrical parameters, expressed through a Sommerfeld integral kernel, was modeled using a new Two-image approximation which gives good results in both near and far fields

On the Choice of the Lightning Channel Current Decay Constant in the Modified Transmission Line Model with Exponential Decay

For different values of the decay constant in the Modified Transmission Line Model with Exponential Decay (MTLE) and for dierent channel heights the results for lightningelectromagnetic field (LEMF) at dierent distances fromthe channel-base are presented in this paper, so as for the spatial and temporal current distribution along the channel. The decay constant influence on LEMF above perfectly conducting ground is analyzed using new lightning channel-base current function and MTLE as an engineering model for a lightning return stroke. The proper choice of this constant can be made based on experimental results but also on the analysis of its influence on electric and magnetic field values and their shape characteristics

Marshall Space Flight Center Electromagnetic Compatibility Design and Interference Control (MEDIC) handbook

The purpose of the MEDIC Handbook is to provide practical and helpful information in the design of electrical equipment for electromagnetic compatibility (EMS). Included is the definition of electromagnetic interference (EMI) terms and units as well as an explanation of the basic EMI interactions. An overview of typical NASA EMI test requirements and associated test setups is given. General design techniques to minimize the risk of EMI and EMI suppression techniques at the board and equipment interface levels are presented. The Handbook contains specific EMI test compliance design techniques and retrofit fixes for noncompliant equipment. Also presented are special tests that are useful in the design process or in instances of specification noncompliance

Reproduction Efficiency and Health Traits in Dorper, White Dorper, and Tsigai Sheep Breeds under Temperate European Conditions

The objective of the current pilot study was to evaluate the reproductive performance and health indicators in Dorper, White Dorper, and Tsigai breed ewes managed semi-intensively under European temperate conditions. A total of 544 ewe-year units were observed, with ewes (ranging from 1.5 to 8 years of age) managed under identical rearing conditions for a period of two consecutive production cycles (2012 through 2013 and 2013 through 2014). In general, significant (p≤0.001) genotype-related disparities were found in occurrence rates for all health parameters taken into study. Clinical mastitis incidence was significantly lower (p≤0.05) in Dorper (9.4%) and White Dorper (10.8%) breeds compared to that of Tsigai ewes (17.4%). Significant differences (p≤0.05) for lameness were found between Dorper and Tsigai breeds, with occurrence rates of 8.0% and 2.9%, respectively. Incidence for pneumonia and abortion was not influenced (p>0.05) by the ewes’ genotype. Litter size was significantly lower (p≤0.05) in White Dorper breed than for Dorper and Tsigai ewes, of 1.21, 1.40, and 1.45, respectively. Conception rates and lambs survival were not affected (p>0.05) by genotype. Results suggest that South African Dorper and White Dorper sheep breeds have adapted well to the specific rearing conditions

Sinteza i antihipoksično djelovanje alifatskih i arilalifatskih amida kofein-8-tioglikolne kiseline

The synthesis of some aliphatic and arylaliphatic amides of caffeine-8-thioglycolic acid was studied. The structures of synthesized compounds were proved by microanalyses, IR- and 1H NMR data. Values of acute p.o. and i.p. toxicity in mice show lower toxicity compared to caffeine. Declines in spontaneous locomotor activity support the idea of depressive CNS activity of the compounds. Two compounds exhibited brain antihypoxic activity (5a and 5b against haemic and circulatory hypoxia, respectively).U radu je opisana sinteza alifatskih i arilalifatskih amida kofein-8-tioglikolne kiseline i njihova karakterizacija elementarnom analizom, IR- i 1H NMR spektroskopijom. Testiranja na miševima pokazuju da su sintetizirani spojevi primijenjeni p.o. i i.p. manje toksični od kofeina. Smanjenje lokomotoričke aktivnosti podupire ideju o njihovom depresivnom djelovanju na SŽS. Spojevi 5a i 5b djeluju antihipoksički u uvjetima krvne i cirkulacijske hipoksije u mozgu

Practical computational toolkits for dendrimers and dendrons structure design

Dendrimers and dendrons offer an excellent platform for developing novel drug delivery systems and medicines. The rational design and further development of these repetitively branched systems are restricted by difficulties in scalable synthesis and structural determination, which can be overcome by judicious use of molecular modelling and molecular simulations. A major difficulty to utilise in silico studies to design dendrimers lies in the laborious generation of their structures. Current modelling tools utilise automated assembly of simpler dendrimers or the inefficient manual assembly of monomer precursors to generate more complicated dendrimer structures. Herein we describe two novel graphical user interface (GUI) toolkits written in Python that provide an improved degree of automation for rapid assembly of dendrimers and generation of their 2D and 3D structures. Our first toolkit uses the RDkit library, SMILES nomenclature of monomers and SMARTS reaction nomenclature to generate SMILES and mol files of dendrimers without 3D coordinates. These files are used for simple graphical representations and storing their structures in databases. The second toolkit assembles complex topology dendrimers from monomers to construct 3D dendrimer structures to be used as starting points for simulation using existing and widely available software and force fields. Both tools were validated for ease-of-use to prototype dendrimer structure and the second toolkit was especially relevant for dendrimers of high complexity and size.Peer reviewe