3,691 research outputs found
Atomic oxygen beam source for erosion simulation
A device for the production of low energy (3 to 10 eV) neutral atomic beams for surface modification studies is described that reproduces the flux of atomic oxygen in low Earth orbit. The beam is produced by the acceleration of plasma ions onto a negatively biased plate of high-Z metal; the ions are neutralized and reflected by the surface, retaining some fraction of their incident kinetic energy, forming a beam of atoms. The plasma is generated by a coaxial RF exciter which produces a magnetically-confined (4 kG) plasma column. At the end of the column, ions fall through the sheath to the plate, whose bias relative to the plasma can be varied to adjust the beam energy. The source provides a neutral flux approximately equal to 5 x 10(exp 16)/sq cm at a distance of 9 cm and a fluence approximately equal to 10(exp 20)/sq cm in five hours. The composition and energy of inert gas beams was diagnosed using a mass spectometer/energy analyzer. The energy spectra of the beams demonstrate energies in the range 5 to 15 eV, and qualitatively show expected dependences upon incident and reflecting atom species and potential drop. Samples of carbon film, carbon-based paint, Kapton, mylar, and teflon exposed to atomic O beams show erosion quite similar to that observed in orbit on the space shuttle
Modelling Deformations in Car Crash animation
In this paper, we present a prototype of a deformation engine to efficiently model and render the damaged structure of vehicles in crash scenarios. We introduce a novel system architecture to accelerate the computation, which is traditionally an extremely expensive task. We alter a rigid body simulator to predict trajectories of cars during a collision and formulate a correction procedure to estimate the deformations of the collapsed car structures within the contact area. Non-linear deformations are solved based on the principle of energy conservation. Large plastic deformations resulting from collisions are modelled as a weighted combination of deformation examples of beams which can be produced using classical mechanics
Reinterpreting the Pollen Data from Dos Cabezas
The published pollen analysis of the Dos Cabezas giants, Geyer et al. (2003), lists variety of purported dietary pollen types. The paper also hypothesises that the giants were poisoned with plant toxins. We have severe reservations about the pollen evidence of diet and poisoning. We suggest that the analysts made several errors in their interpretation. Firstly, some of the discovered pollen types are not prehistoric endemics to the Dos Cabezas region of coastal Peru. These include the pollen of fava beans (cultivated in the Old World), and specified species of agave and sage. We believe that some or all of the identifications of pollen from arracacha, maca, yuca, oca, potato, peanut, ciruela and tarwi are in error based on the distance they grow from Dos Cabezas and/or their ecological/pollination requirements. We think that it is unlikely that the giants were poisoned because the poisons made from six poisonous plants are not made from the flowers and five of them grow on the opposite side of the Andes from Dos Cabezas. We present an alternative dietary interpretation of the Dos Cabezas giants and suggest methods by which palynological analysis could be improved
Lifetime predictions for the Solar Maximum Mission (SMM) and San Marco spacecraft
Lifetime prediction techniques developed by the Goddard Space Flight Center (GSFC) Flight Dynamics Division (FDD) are described. These techniques were developed to predict the Solar Maximum Mission (SMM) spacecraft orbit, which is decaying due to atmospheric drag, with reentry predicted to occur before the end of 1989. Lifetime predictions were also performed for the Long Duration Exposure Facility (LDEF), which was deployed on the 1984 SMM repair mission and is scheduled for retrieval on another Space Transportation System (STS) mission later this year. Concepts used in the lifetime predictions were tested on the San Marco spacecraft, which reentered the Earth's atmosphere on December 6, 1988. Ephemerides predicting the orbit evolution of the San Marco spacecraft until reentry were generated over the final 90 days of the mission when the altitude was less than 380 kilometers. The errors in the predicted ephemerides are due to errors in the prediction of atmospheric density variations over the lifetime of the satellite. To model the time dependence of the atmospheric densities, predictions of the solar flux at the 10.7-centimeter wavelength were used in conjunction with Harris-Priester (HP) atmospheric density tables. Orbital state vectors, together with the spacecraft mass and area, are used as input to the Goddard Trajectory Determination System (GTDS). Propagations proceed in monthly segments, with the nominal atmospheric drag model scaled for each month according to the predicted monthly average value of F10.7. Calibration propagations are performed over a period of known orbital decay to obtain the effective ballistic coefficient. Progagations using plus or minus 2 sigma solar flux predictions are also generated to estimate the despersion in expected reentry dates. Definitive orbits are compared with these predictions as time expases. As updated vectors are received, these are also propagated to reentryto continually update the lifetime predictions
Characterization of a 5-eV neutral atomic oxygen beam facility
An experimental effort to characterize an existing 5-eV neutral atomic oxygen beam facility being developed at Princeton Plasma Physics Laboratory is described. This characterization effort includes atomic oxygen flux and flux distribution measurements using a catalytic probe, energy determination using a commercially designed quadrupole mass spectrometer (QMS), and the exposure of oxygen-sensitive materials in this beam facility. Also, comparisons were drawn between the reaction efficiencies of materials exposed in plasma ashers, and the reaction efficiencies previously estimated from space flight experiments. The results of this study show that the beam facility is capable of producing a directional beam of neutral atomic oxygen atoms with the needed flux and energy to simulate low Earth orbit (LEO) conditions for real time accelerated testing. The flux distribution in this facility is uniform to +/- 6 percent of the peak flux over a beam diameter of 6 cm
The Mississippi River System Shallow Draft Barge Market – Perfectly Competitive or Oligopolistic?
Most transportation textbooks and articles on inland waterway navigation assume a perfectly competitive Mississippi River system barge industry. One study found the 1972 and 1977 grain barge industry to be oligopolistic. A second study of the U.S. barge industry found "intra industry competition for the barge industry on a day-to-day basis with easy entry and exit." Using the concentration ratio and the Herfindahl Index, this study found the Mississippi River barge industry to be oligopolistic. These results suggest that Mississippi River navigation infrastructure studies should not use long run marginal barge costs as a proxy for barge rates
Effects of Growth-Promoting Technologies on Muscle Structural Characteristics and Meat Tenderness
Skeletal muscle tissue consists of two main structures that elicit strong influences on cooked meat tenderness: myofibrillar and connective tissues. The myofibrillar component consists of contractile and cytoskeletal proteins that aid in muscle contraction and support. A large portion of meat science literature documents the effects that postmortem aging elicits in terms of weakening the myofibrillar component to improve tenderness. Connective tissue is primarily comprised of collagen, the most abundant protein within the body. The function of this tissue is to support the myofibrillar component and transfer the force of contraction. Collagen, characterized by its solubility, is most commonly identified as the muscle tissue structure that has a large influence on tenderness but is commonly characterized as unaffected by postmortem degradation.
Ractopamine hydrochloride (Optaflexx, Elanco Animal Health, Greenfield, IN) is a beta-adrenergic agonist that directs nutrients away from fat accretion to lean muscle production and is commonly fed during the finishing period of cattle production. Anabolic implants are another growth-promoting technology that increases muscle mass. Numerous studies indicate that both technologies increase muscle mass by increasing the cross-sectional area of muscle fibers. In addition, many studies have demonstrated that both growth promotants negatively affect tenderness, which can be improved by aging. Little is known about the effects of growth promotants or extended aging on collagen solubility. The purpose of this study was to examine the effects of growth-promoting technologies and extended aging on structural muscle characteristics and meat tenderness
What About High-Moisture Corn for Hogs?
High-moisture corn is a satisfactory feedstuff for growing-finishing hogs, according to the results of a series of tests at Iowa State. But high-moisture corn calls for special storage and handling to maintain quality
- …