Great Lakes Basin Water Quality Analysis Using L-THIA Model in Desktop GIS

The objective of this project is to provide a scientific estimate of the surface runoff and water quality within the great lakes watershed. The problem is that there has been a trend of a decrease in water quality that threatens to damage marine ecosystems. In addition, the Great Lakes significance to the US economy is highlighted by its use in fisheries, tourism, shipping, recreation and as a freshwater supply. In 1972 the Great Lakes Water Quality Agreement was established between the US and Canada, and Areas of Concern (AOC) were identified within respective country boundaries. The US government has invested heavily in remedial action within these areas and this is expected to be reflected by improved land use policy making. Therefore, it is expected that although there is to be an overall degradation in water quality, in these areas signs of improvement should be evident. A “Big Data” Long-term Hydrologic Impact (L-THIA) model was used for the analysis inside an ArcMAP user interface. The entire Great Lakes basin, as well as, the AOC was analyzed to highlight remedial efforts in this area. The model used national land coverage data (NLCD) for the years 2001, 2006 and 2011 to give a comparison over a 10 year period The general observation was an increase in urbanization between 2001 and 2006 which resulted in an increase in runoff and decrease in water quality. A similar trend existed from 2006 to 2011, however, the rate of water quality degradation had subdued

Great Lakes Basin Analysis using L-THIA

The objective of this project is to provide a scientific estimate of the surface runoff and water quality within the Great Lakes watershed. A “Big Data” Long-term Hydrologic Impact (L-THIA) model was used for the analysis inside an ArcMAP user interface

ICP polishing of silicon for high quality optical resonators on a chip

Miniature concave hollows, made by wet etching silicon through a circular mask, can be used as mirror substrates for building optical micro-cavities on a chip. In this paper we investigate how ICP polishing improves both shape and roughness of the mirror substrates. We characterise the evolution of the surfaces during the ICP polishing using white-light optical profilometry and atomic force microscopy. A surface roughness of 1 nm is reached, which reduces to 0.5 nm after coating with a high reflectivity dielectric. With such smooth mirrors, the optical cavity finesse is now limited by the shape of the underlying mirror

A stable, single-photon emitter in a thin organic crystal for application to quantum-photonic devices

Single organic molecules offer great promise as bright, reliable sources of identical single photons on demand, capable of integration into solid-state devices. It has been proposed that such molecules in a crystalline organic matrix might be placed close to an optical waveguide for this purpose, but so far there have been no demonstrations of sufficiently thin crystals, with a controlled concentration of suitable dopant molecules. Here we present a method for growing very thin anthracene crystals from super-saturated vapour, which produces crystals of extreme flatness and controlled thickness. We show how this crystal can be doped with a widely adjustable concentration of dibenzoterrylene (DBT) molecules and we examine the optical properties of these molecules to demonstrate their suitability as quantum emitters in nanophotonic devices. Our measurements show that the molecules are available in the crystal as single quantum emitters, with a well-defined polarisation relative to the crystal axes, making them amenable to alignment with optical nanostructures. We find that the radiative lifetime and saturation intensity vary little within the crystal and are not in any way compromised by the unusual matrix environment. We show that a large fraction of these emitters are able to deliver more than $10^{12}$ photons without photo-bleaching, making them suitable for real applications.Comment: 12 pages, 10 figures, comments welcom

A robust floating nanoammeter

A circuit capable of measuring nanoampere currents while floating at voltages up to at least 25kV is described. The circuit relays its output to ground potential via an optical fiber. We particularly emphasize the design and construction techniques which allow robust operation in the presence of high voltage spikes and discharges.Comment: 5 pages, 2 figure

Bar graph monitor

Bar graph monitor of pulse position modulation telemetry ground station equipment for sounding rocket

A high quality, efficiently coupled microwave cavity for trapping cold molecules

We characterize a Fabry-Perot microwave cavity designed for trapping atoms and molecules at the antinode of a microwave field. The cavity is fed from a waveguide through a small coupling hole. Focussing on the compact resonant modes of the cavity, we measure how the electric field profile, the cavity quality factor, and the coupling efficiency, depend on the radius of the coupling hole. We measure how the quality factor depends on the temperature of the mirrors in the range from 77 to 293K. The presence of the coupling hole slightly changes the profile of the mode, leading to increased diffraction losses around the edges of the mirrors and a small reduction in quality factor. We find the hole size that maximizes the intra-cavity electric field. We develop an analytical theory of the aperture-coupled cavity that agrees well with our measurements, with small deviations due to enhanced diffraction losses. We find excellent agreement between our measurements and finite-difference time-domain simulations of the cavity.Comment: 16 pages, 8 figure

Prospects for the measurement of the electron electric dipole moment using YbF

We discuss an experiment underway at Imperial College London to measure the permanent electric dipole moment (EDM) of the electron using a molecular beam of YbF. We describe the measurement method, which uses a combination of laser and radiofrequency resonance techniques to detect the spin precession of the YbF molecule in a strong electric field. We pay particular attention to the analysis scheme and explore some of the possible systematic effects which might mimic the EDM signal. Finally, we describe technical improvements which should increase the sensitivity by more than an order of magnitude over the current experimental limit.Comment: 6 pages, 2 figure

Bose-Einstein Condensation on a Permanent-Magnet Atom Chip

We have produced a Bose-Einstein condensate on a permanent-magnet atom chip based on periodically magnetized videotape. We observe the expansion and dynamics of the condensate in one of the microscopic waveguides close to the surface. The lifetime for atoms to remain trapped near this dielectric material is significantly longer than above a metal surface of the same thickness. These results illustrate the suitability of microscopic permanent-magnet structures for quantum-coherent preparation and manipulation of cold atoms.Comment: 4 pages, 6 figures, Published in Phys. Rev. A, Rapid Com

Bose-Einstein Condensation on a Permanent-Magnet Atom Chip

We have produced a Bose-Einstein condensate on a permanent-magnet atom chip based on periodically magnetized videotape. We observe the expansion and dynamics of the condensate in one of the microscopic waveguides close to the surface. The lifetime for atoms to remain trapped near this dielectric material is significantly longer than above a metal surface of the same thickness. These results illustrate the suitability of microscopic permanent-magnet structures for quantum-coherent preparation and manipulation of cold atoms.Comment: 4 pages, 6 figures, Published in Phys. Rev. A, Rapid Com