STOL Simulation Requirements for Development of Integrated Flight/propulsion Control Systems

The role and use of simulation as a design tool in developing integrated systems where design criteria is largely unavailable is well known. This paper addresses additional simulation needs for the development of Integrated Flight/Propulsion Control Systems (IFPCS) which will improve the probability of properly interpreting simulation results. These needs are based on recent experience with power approach flying qualities evaluations of an advanced fighter configuration which incorporated Short Takeoff and Landing (STOL) technologies and earlier experiences with power approach flying qualities evaluations on the AFTI/F-16 program. The use of motion base platforms with axial and normal degrees of freedom will help in evaluating pilot coupling and workload in the presence of high frequency low amplitude axial accelerations produced by high bandwidth airspeed controllers in a gusty environment

Kelvin-Helmholtz Instability in a Weakly Ionized Medium

Ambient interstellar material may become entrained in outflows from massive stars as a result of shear flow instabilities. We study the linear theory of the Kelvin - Helmholtz instability, the simplest example of shear flow instability, in a partially ionized medium. We model the interaction as a two fluid system (charged and neutral) in a planar geometry. Our principal result is that for much of the relevant parameter space, neutrals and ions are sufficiently decoupled that the neutrals are unstable while the ions are held in place by the magnetic field. Thus, we predict that there should be a detectably narrower line profile in ionized species tracing the outflow compared with neutral species since ionized species are not participating in the turbulent interface with the ambient ISM. Since the magnetic field is frozen to the plasma, it is not tangled by the turbulence in the boundary layer.Comment: 21 pages, 4 figure

Thermomagnetic analysis of meteorites. 3: C3 and C4 chondrites

Thermomagnetic analysis on all of the C3 and C4 chondrites, conducted under conditions of controlled oxygen fugacity, indicates the presence of a thermally unstable component in at least 5 of the C3 chondrites which upon heating results in magnetite production. This unstable component is most likely troilite (FeS). The presence of the unstable substance may affect the estimation of paleointensities in meteorites which contain it. Our results indicate that Grosnaja, Ornans, Kainsaz, Felix, and Warrenton are likely to be less complicated for paleointensity determinations than the other C3 chondrites. Both C4 chondrites should lead to reliable results

The fish fauna of the Iwokrama Forest

Fishes were collected from the rivers in and around the Iwokrama Forest during January-February and November-December 1997. Four hundred species of fish were recorded from forty families in ten orders. Many of these fishes are newly recorded from Guyana and several are thought to be endemic. The number of species recorded for the area is surprising given the low level of effort and suggests that this area may be particularly important from a fish diversity perspective. This paper focuses on species of particular interest from a management perspective including those considered economically important, rare or endangered. The paper is also the basis for developing fisheries management systems in the Iwokrama Forest and Rupununi Wetlands

Thermomagnetic analysis of meterorites. 4: Ureilites

Samples of all available ureilites have been analyzed thermomagnetically. For three of the six (Dyalpur, Goalpara and Havero) evidence was found for only low-nickel metallic-iron as the magnetic component and the (saturation magnetization vs, temperature) curves were reversible. In the Novo Urei ureilite, magnetite in addition to low-nickel metallic-iron was indicated and again the Js-T curve was reversible. For the two badly weathered ureilites, Dingo Pup Donga and North Haig, indication was also found that both initial magnetite and low-nickel metallic-iron were present. However, the Js-T curves were somewhat irreversible and the final saturation magnetization was 20% and 50% greater than initially for North Haig and Dingo Pup Donga, respectively. This behavior is interpreted to be the result of magnetite production from a secondary iron oxide during the experiment

Thermomagnetic analysis of meteorites, 2: C2 chondrites

Samples of all eighteen of the known C2 chondrites were analyzed thermomagnetically. For eleven of these, initial Fe3O4 content is low(generally 1%) and the J sub s-T curves are irreversible. The heating curves show variable and erratic behavior, whereas the cooling curves appear to be that of Fe3O4. The saturation moment after cooling is greater (up to 10 times larger) than it is initially. This behavior is interpreted to be the result of the production of magnetite from a thermally unstable phase--apparently FeS. Four of the remaining 7 C2 chondrites contain Fe3O4 as the only significant magnetic phase: initial magnetite contents range from 4 to 13 percent. The remaining three C2 chondrites contain iron or nickel-iron in addition to Fe3O4. These seven C2 chondrites show little evidence of the breakdown of a thermally unstable phase

Hall current effects in dynamic magnetic reconnection solutions

The impact of Hall current contributions on flow driven planar magnetic merging solutions is discussed. The Hall current is important if the dimensionless Hall parameter (or normalized ion skin depth) satisfies cH>η where η is the inverse Lundquist number for the plasma. A dynamic analysis of the problem shows, however, that the Hall current initially manifests itself, not by modifying the planar reconnection field, but by inducing a non-reconnecting perpendicular "separator" component in the magnetic field. Only if the stronger condition c2/H > η is satisfied can Hall currents be expected to affect the planar merging. These analytic predictions are then tested by performing a series of numerical experiments in periodic geometry, using the full system of planar magnetohydrodynamic (MHD) equations. The numerical results confirm that the nature of the merging changes dramatically when the Hall coupling satisfies c2/H > η. In line with the analytic treatment of sheared reconnection, the coupling provided by the Hall term leads to the emergence of multiple current layers that can enhance the global Ohmic dissipation at the expense of the reconnection rate. However, the details of the dissipation depend critically on the symmetries of the simulation, and when the merging is "head-on" (i.e., comprises fourfold symmetry) the reconnection rate can be enhanced

Rapid Separable Analysis of Higher Order Correlators in Large Scale Structure

We present an efficient separable approach to the estimation and reconstruction of the bispectrum and the trispectrum from observational (or simulated) large scale structure data. This is developed from general CMB (poly-)spectra methods which exploit the fact that the bispectrum and trispectrum in the literature can be represented by a separable mode expansion which converges rapidly (with $n_\textrm{max}={\cal{O}}(30)$ terms). With an effective grid resolution $l_\textrm{max}$ (number of particles/grid points $N=l_\textrm{max}^3$), we present a bispectrum estimator which requires only ${\cal O}(n_\textrm{max} \times l_\textrm{max}^3)$ operations, along with a corresponding method for direct bispectrum reconstruction. This method is extended to the trispectrum revealing an estimator which requires only ${\cal O}(n_\textrm{max}^{4/3} \times l_\textrm{max}^3)$ operations. The complexity in calculating the trispectrum in this method is now involved in the original decomposition and orthogonalisation process which need only be performed once for each model. However, for non-diagonal trispectra these processes present little extra difficulty and may be performed in ${\cal O}(l_\textrm{max}^4)$ operations. A discussion of how the methodology may be applied to the quadspectrum is also given. An efficient algorithm for the generation of arbitrary nonGaussian initial conditions for use in N-body codes using this separable approach is described. This prescription allows for the production of nonGaussian initial conditions for arbitrary bispectra and trispectra. A brief outline of the key issues involved in parameter estimation, particularly in the non-linear regime, is also given