Assessment of Buffet Forcing Function Development Process Using Unsteady Pressure Sensitive Paint

A wind tunnel test was conducted at the Ames Unitary Plan Wind Tunnel to characterize the transonic buffet environment of a generic launch vehicle forebody. The test examined a highly instrumented version of the Coe and Nute Model 11 test article first tested in the 1960s. One of the measurement techniques used during this test was unsteady pressure sensitive paint (uPSP) developed at the Arnold Engineering Development Complex. This optical measurement technique measured fluctuating pressures at over 300,000 locations on the surface of the model. The high spatial density of these measurements provided an opportunity to examine in depth the assumptions underpinning the development of buffet forcing functions (BFFs) used in the development of the Space Launch System vehicle. The comparison of discrete-measurement-based BFFs to BFFs developed by continuous surface pressure integration indicates that the current BFF development approach under predicts low frequency content of the BFFs while over predicting high frequency content. Coherence-based adjustments employed to reduce over prediction in the surface integration of discrete pressure measurements contribute to the inaccuracy of the BFFs and their implementation should be reevaluated

Implementing the Simple Biosphere Model (SiB) in a general circulation model: Methodologies and results

The Simple Biosphere MOdel (SiB) of Sellers et al., (1986) was designed to simulate the interactions between the Earth's land surface and the atmosphere by treating the vegetation explicitly and relistically, thereby incorporating biophysical controls on the exchanges of radiation, momentum, sensible and latent heat between the two systems. The steps taken to implement SiB in a modified version of the National Meteorological Center's spectral GCM are described. The coupled model (SiB-GCM) was used with a conventional hydrological model (Ctl-GCM) to produce summer and winter simulations. The same GCM was used with a conventional hydrological model (Ctl-GCM) to produce comparable 'control' summer and winter variations. It was found that SiB-GCM produced a more realistic partitioning of energy at the land surface than Ctl-GCM. Generally, SiB-GCM produced more sensible heat flux and less latent heat flux over vegetated land than did Ctl-GCM and this resulted in the development of a much deeper daytime planetary boundary and reduced precipitation rates over the continents in SiB-GCM. In the summer simulation, the 200 mb jet stream and the wind speed at 850 mb were slightly weakened in the SiB-GCM relative to the Ctl-GCM results and equivalent analyses from observations

Improved Algorithms for Approximate String Matching (Extended Abstract)

The problem of approximate string matching is important in many different areas such as computational biology, text processing and pattern recognition. A great effort has been made to design efficient algorithms addressing several variants of the problem, including comparison of two strings, approximate pattern identification in a string or calculation of the longest common subsequence that two strings share. We designed an output sensitive algorithm solving the edit distance problem between two strings of lengths n and m respectively in time O((s-|n-m|)min(m,n,s)+m+n) and linear space, where s is the edit distance between the two strings. This worst-case time bound sets the quadratic factor of the algorithm independent of the longest string length and improves existing theoretical bounds for this problem. The implementation of our algorithm excels also in practice, especially in cases where the two strings compared differ significantly in length. Source code of our algorithm is available at http://www.cs.miami.edu/\~dimitris/edit_distanceComment: 10 page

Spectrum of Sizes for Perfect Deletion-Correcting Codes

One peculiarity with deletion-correcting codes is that perfect $t$-deletion-correcting codes of the same length over the same alphabet can have different numbers of codewords, because the balls of radius $t$ with respect to the Levenshte\u{\i}n distance may be of different sizes. There is interest, therefore, in determining all possible sizes of a perfect $t$-deletion-correcting code, given the length $n$ and the alphabet size~$q$. In this paper, we determine completely the spectrum of possible sizes for perfect $q$-ary 1-deletion-correcting codes of length three for all $q$, and perfect $q$-ary 2-deletion-correcting codes of length four for almost all $q$, leaving only a small finite number of cases in doubt.Comment: 23 page

Banking from Leeds, not London: regional strategy and structure at the Yorkshire Bank, 1859–1952

Industrial philanthropist Edward Akroyd created the Yorkshire Penny Savings Bank in 1859. Despite competition from the Post Office Savings Bank after 1861 and a serious reserve problem in 1911, it sustained his overall strategy to become a successful regional bank. Using archival and contemporary sources to build on recent scholarship illustrating how savings banks were integrated into local economies and the complementary roles of philanthropy and paternalism, we analyse an English regional bank's strategy, including an assessment of strategic innovation, ownership changes and management structure. This will demonstrate that the founder's vision continued, even though the 1911 crisis radically altered both strategy and structure

Separated flow

A brief overview of flow separation phenomena is provided. Langley has many active research programs in flow separation related areas. Three cases are presented which describe specific examples of flow separation research. In each example, a description of the fundamental fluid physics and the complexity of the flow field is presented along with a method of either reducing or controlling the extent of separation. The following examples are discussed: flow over a smooth surface with an adverse pressure gradient; flow over a surface with a geometric discontinuity; and flow with shock-boundary layer interactions. These results will show that improvements are being made in the understanding of flow separation and its control

Microstructure and magnetic properties of as-quenched and heat-treated (Nd,Dy)FeB powders produced by high pressure gas atomization

The magnetic properties and microstructures of a series of as-quenched and heat-treated inert gas atomized (IGA) rare-earth rich (Nd,Dy)–Fe–B particles have been investigated. Heat treatment was found to substantially improve magnetic properties, with effects most pronounced in samples with higher Dy content and higher total rare earth (RE) content. The as-quenched particles consisted of an underquenched dendritic-like structure with the majority phase RE2Fe14B, and a fine network of RE-rich material between the grains. The heat-treated particles showed a change in microstructure which correlated with magnetic property changes. Particles which showed little change in magnetic properties showed no obvious change in microstructure. Particles which showed large changes in magnetic properties showed a large change in microstructure: most of the fine network of RE-rich interdendritic material disappeared, leaving behind only a few small isolated regions. This would seem to indicate that the predominant mechanism determining coercivity in these IGA RE-rich (Nd,Dy)–Fe–B powers is nucleation of reverse domains, rather than domain wall pinning at nonmagnetic intergranular material