Eddy genesis and manipulation in plane laminar shear flow

Eddy formation and presence in a plane laminar shear flow configuration consisting of two infinitely long plates orientated parallel to each other is investigated theoretically. The upper plate, which is planar, drives the flow; the lower one has a sinusoidal profile and is fixed. The governing equations are solved via a full finite element formulation for the general case and semi-analytically at the Stokes flow limit. The effects of varying geometry (involving changes in the mean plate separation or the amplitude and wavelength of the lower plate) and inertia are explored separately. For Stokes flow and varying geometry, excellent agreement between the two methods of solution is found. Of particular interest with regard to the flow structure is the importance of the clearance that exists between the upper plate and the tops of the corrugations forming the lower one. When the clearance is large, an eddy is only present at sufficiently large amplitudes or small wavelengths. However, as the plate clearance is reduced, a critical value is found which triggers the formation of an eddy in an otherwise fully attached flow for any finite amplitude and arbitrarily large wavelength. This is a precursor to the primary eddy to be expected in the lid-driven cavity flow which is formed in the limit of zero clearance between the plates. The influence of the flow driving mechanism is assessed by comparison with corresponding solutions for the case of gravity-driven fluid films flowing over an undulating substrate. When inertia is present, the flow generally becomes asymmetrical. However, it is found that for large mean plate separations the flow local to the lower plate becomes effectively decoupled from the inertia dominated overlying flow if the wavelength of the lower plate is sufficiently small. In such cases the local flow retains its symmetry. A local Reynolds number based on the wavelength is shown to be useful in characterising these large-gap flows. As the mean plate separation is reduced, the form of the asymmetry caused by inertia changes, and becomes strongly dependent on the plate separation. For lower plate wavelengths which do not exhibit a cinematically induced secondary eddy, an inertially induced secondary eddy can be created if the mean plate separation is sufficiently small and the global Reynolds number sufficiently large

Similarities and differences in the dolomitization history of two coeval Middle Triassic carbonate platforms, Balaton Highland, Hungary

Dolomitization of platform carbonates is commonly the result of multiphase processes. Documentation of the complex dolomitization history is difficult if completely dolomitized sections are studied. Two Middle Anisian sections representing two coeval carbonate platforms were investigated and compared in the present study. Both sections are made up of meter-scale peritidal–lagoonal cycles with significant pedogenic overprint. One of the sections contains non-dolomitized, partially dolomitized, and completely dolomitized intervals, whereas the other is completely dolomitized. Based on investigations of the partially dolomitized section, penecontemporaneous dolomite formation and/or very early post-depositional dolomitization were identified in various lithofacies types. In shallow subtidal facies, porphyrotopic dolomite was found preferentially in microbial micritic fabrics. Microbially induced dolomite precipitation and/or progressive replacement of carbonate sediments could be interpreted for stromatolites. Cryptocrystalline to very finely crystalline dolomite, probably of pedogenic origin, was encountered in paleosoil horizons. Fabric-destructive dolomite commonly found below these horizons was likely formed via reflux of evaporated seawater. As a result of the different paleogeographic settings of the two platforms, their shallow-burial conditions were significantly different. One of the studied sections was located at the basinward platform margin where pervasive fabric-retentive dolomitization took place in a shallow-burial setting, probably via thermal convection. In contrast, in the area of the other, smaller platform shallow-water carbonates were covered by basinal deposits, preventing fluid circulation and accordingly pervasive shallow-burial dolomitization. In the intermediate to deep burial zone, recrystallization of partially dolomitized limestone and occlusion of newly opened fractures and pores by coarsely crystalline dolomite took place

Multilayer Modelling of Lubricated Contacts: A New Approach Based on a Potential Field Description

A first integral approach, derived in an analogous fashion to Maxwell’s use of potential fields, is employed to investigate the flow characteristics, with a view to minimising friction, of shear-driven fluid motion between rigid surfaces in parallel alignment as a model for a lubricated joint, whether naturally occurring or engineered replacement. For a viscous bilayer arrangement comprised of immiscible liquids, it is shown how the flow and the shear stress along the separating interface is influenced by the mean thickness of the layers and the ratio of their respective viscosities. Considered in addition, is how the method can be extended for application to the more challenging problem of when one, or both, of the layers is a viscoelastic material

An Architectural Approach to Autonomics and Self-management of Automotive Embedded Electronic Systems

International audienceEmbedded electronic systems in vehicles are of rapidly increasing commercial importance for the automotive industry. While current vehicular embedded systems are extremely limited and static, a more dynamic configurable system would greatly simplify the integration work and increase quality of vehicular systems. This brings in features like separation of concerns, customised software configuration for individual vehicles, seamless connectivity, and plug-and-play capability. Furthermore, such a system can also contribute to increased dependability and resource optimization due to its inherent ability to adjust itself dynamically to changes in software, hardware resources, and environment condition. This paper describes the architectural approach to achieving the goals of dynamically self-configuring automotive embedded electronic systems by the EU research project DySCAS. The architecture solution outlined in this paper captures the application and operational contexts, expected features, middleware services, functions and behaviours, as well as the basic mechanisms and technologies. The paper also covers the architecture conceptualization by presenting the rationale, concerning the architecture structuring, control principles, and deployment concept. In this paper, we also present the adopted architecture V&V strategy and discuss some open issues in regards to the industrial acceptance

Key issues in the design of pay for performance programs

Pay for performance (P4P) is increasingly being used to stimulate healthcare providers to improve their performance. However, evidence on P4P effectiveness remains inconclusive. Flaws in program design may have contributed to this limited success. Based on a synthesis of relevant theoretical and empirical literature, this paper discusses key issues in P4P-program design. The analysis reveals that designing a fair and effective program is a complex undertaking. The following tentative conclusions are made: (1) performance is ideally defined broadly, provided that the set of measures remains comprehensible, (2) concerns that P4P encourages "selection" and "teaching to the test" should not be dismissed, (3) sophisticated risk adjustment is important, especially in outcome and resource use measures, (4) involving providers in program design is vital, (5) on balance, group incentives are preferred over individual incentives, (6) whether to use rewards or penalties is context-dependent, (7) payouts should be frequent and low-powered, (8) absolute targets are generally preferred over relative targets, (9) multiple targets are preferred over single targets, and (10) P4P should be a permanent component of provider compensation and is ideally "decoupled" form base payments. However, the design of P4P programs should be tailored to the specific setting of implementation, and empirical research is needed to confirm the conclusions

HDG-NEFEM with Degree Adaptivity for Stokes Flows

This paper presents the first degree adaptive procedure able to directly use the geometry given by a CAD model. The technique uses a hybridisable discontinuous Galerkin discretisation combined with a NURBS-enhanced rationale, completely removing the uncertainty induced by a polynomial approximation of curved boundaries that is common within an isoparametric approach. The technique is compared against two strategies to perform degree adaptivity currently in use. This paper demonstrates, for the first time, that the most extended technique for degree adaptivity can easily lead to a non-reliable error estimator if no communication with CAD software is introduced whereas if the communication with the CAD is done, it results in a substantial computing time. The proposed technique encapsulates the CAD model in the simulation and is able to produce reliable error estimators irrespectively of the initial mesh used to start the adaptive process. Several numerical examples confirm the findings and demonstrate the superiority of the proposed technique. The paper also proposes a novel idea to test the implementation of high-order solvers where different degrees of approximation are used in different elements

Use of Nutritional Supplements in Youth with Medicated and Unmedicated Attention-Deficit/Hyperactivity Disorder

Objective: To find out whether use of nutritional supplements (NUS) differs between children and adolescents with attention-deficit/hyperactivity disorder (ADHD; medicated or unmedicated), compared with those without the disorder. Methods: We used cross-sectional data from the population-based I.Family study conducted between 2013 and 2014 in eight European countries. Parents completed questionnaires and participated in interviews, for example, on health and medical history of their child. Data from 5067 children and adolescents aged 5-17 years were included. Exposures were medicated (with ADHD-approved medication) and unmedicated ADHD. The outcome was the use of NUS, measured by use of any or multiple different NUS. Multivariable logistic regression adjusted for sociodemographics and health determinants was used to find ADHD-depending differences. Results: The study sample comprised 4490 children and adolescents without ADHD and 51 medicated and 76 unmedicated subjects with ADHD. Regarding the use of any NUS, no statistically significant differences were found between children and adolescents without ADHD (18%) and those with medicated (18%) or unmedicated ADHD (22%). However, discrepancies appear when considering multiple use of NUS, not reported for any medicated ADHD subject but remarkably often for unmedicated ADHD subjects (13%), resulting in an adjusted odds ratio of 2.6 (95% confidence interval, 1.2-5.6) when compared with those without ADHD (5%). Conclusion: Children and adolescents who were not using medication for treating ADHD potentially took NUS as oral remedies. Given the potential for a delay of indicated treatments and for use of those NUS which have no proven effectiveness, pediatricians should actively explore whether NUS have been used to treat ADHD core symptoms, and families should be informed that the average effect size has to be considered small

Gcg-XTEN: An Improved Glucagon Capable of Preventing Hypoglycemia without Increasing Baseline Blood Glucose

While the majority of current diabetes treatments focus on reducing blood glucose levels, hypoglycemia represents a significant risk associated with insulin treatment. Glucagon plays a major regulatory role in controlling hypoglycemia in vivo, but its short half-life and hyperglycemic effects prevent its therapeutic use for non-acute applications. The goal of this study was to identify a modified form of glucagon suitable for prophylactic treatment of hypoglycemia without increasing baseline blood glucose levels.Through application of the XTEN technology, we report the construction of a glucagon fusion protein with an extended exposure profile (Gcg-XTEN). The in vivo half-life of the construct was tuned to support nightly dosing through design and testing in cynomolgus monkeys. Efficacy of the construct was assessed in beagle dogs using an insulin challenge to induce hypoglycemia. Dose ranging of Gcg-XTEN in fasted beagle dogs demonstrated that the compound was biologically active with a pharmacodynamic profile consistent with the designed half-life. Prophylactic administration of 0.6 nmol/kg Gcg-XTEN to dogs conferred resistance to a hypoglycemic challenge at 6 hours post-dose without affecting baseline blood glucose levels. Consistent with the designed pharmacokinetic profile, hypoglycemia resistance was not observed at 12 hours post-dose. Importantly, the solubility and stability of the glucagon peptide were also significantly improved by fusion to XTEN.The data show that Gcg-XTEN is effective in preventing hypoglycemia without the associated hyperglycemia expected for unmodified glucagon. While the plasma clearance of this Gcg-XTEN has been optimized for overnight dosing, specifically for the treatment of nocturnal hypoglycemia, constructs with significantly longer exposure profiles are feasible. Such constructs may have multiple applications such as allowing for more aggressive insulin treatment regimens, treating hypoglycemia due to insulin-secreting tumors, providing synergistic efficacy in combination therapies with long-acting GLP1 analogs, and as an appetite suppressant for treatment of obesity. The improved physical properties of the Gcg-XTEN molecule may also allow for novel delivery systems not currently possible with native glucagon

Barriers encountered during enrollment in an internet-mediated randomized controlled trial

<p>Abstract</p> <p>Background</p> <p>Online technology is a promising resource for conducting clinical research. While the internet may improve a study's reach, as well as the efficiency of data collection, it may also introduce a number of challenges for participants and investigators. The objective of this research was to determine the challenges that potential participants faced during the enrollment phase of a randomized controlled intervention trial of Stepping Up to Health, an internet-mediated walking program that utilized a multi-step online enrollment process.</p> <p>Methods</p> <p>We conducted a quantitative content analysis of 623 help tickets logged in a participant management database during the enrollment phase of a clinical trial investigating the effect of an automated internet-mediated walking intervention. Qualitative coding was performed by two trained coders, and 10% of the sample was coded by both coders to determine inter-coder reliability. Quantitative analyses included standard descriptive statistics on ticket characteristics and theme frequency, and a Poisson regression analysis identified characteristics of potential participants who reported more frequent problems during enrollment.</p> <p>Results</p> <p>In total, 880 potential participants visited the study website and 80% completed the enrollment screening. Of the potential participants who visited the study website, 38% had help tickets logged in the participant management database. The total number of help tickets associated with individual potential participants ranged from 0 to 7 (M = .71). Overall, 46% of help tickets were initiated by email and 54% were initiated by phone. The most common help ticket theme was issues related to the study process (48%). The next most prominent theme was discussion related to obtaining medical clearance (34%), followed by issues related to pedometers and uploading (31%). Older individuals, women, and those with lower self-rated internet ability were more likely to report problems during the enrollment process.</p> <p>Conclusion</p> <p>Prospective participants in an online clinical trial encountered a number of barriers to enrollment that led them to request help from study staff. Questions about the complex enrollment process itself were common. In a complex multi-step enrollment process, providing personalized feedback to potential participants indicating their status within the enrollment process may be beneficial.</p> <p>Trial Registration</p> <p>ClinicalTrials.gov NCT00729040</p