268 research outputs found
Identification of the amino acid labionin and its desulfurised derivative in the type-III lantibiotic LabA2 by means of GC/MS
Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG geförderten) Allianz- bzw. Nationallizenz frei zugänglich.This publication is with permission of the rights owner freely accessible due to an Alliance licence and a national licence (funded by the DFG, German Research Foundation) respectively.A GC-MS method for the rapid and unambiguous identification of the amino acid labionin (Lab) occurring in type-III lantibiotics is presented. This method will constitute a valuable tool for the characterisation and structure elucidation of labyrinthopeptins and their differentiation from lanthionine-type lantibiotics
What makes Xanthomonas albilineans unique amongst xanthomonads?
Xanthomonas albilineans causes leaf scald, a lethal disease of sugarcane. Compared to other species of Xanthomonas, X. albilineans exhibits distinctive pathogenic mechanisms, ecology and taxonomy. Its genome, which has experienced significant erosion, has unique genomic features. It lacks two loci required for pathogenicity in other plant pathogenic species of Xanthomonas: the xanthan gum biosynthesis and the Hrp-T3SS (hypersensitive response and pathogenicity-type three secretion system) gene clusters. Instead, X. albilineans harbors in its genome an SPI-1 (Salmonella pathogenicity island-1) T3SS gene cluster usually found in animal pathogens. X. albilineans produces a potent DNA gyrase inhibitor called albicidin, which blocks chloroplast differentiation, resulting in the characteristic white foliar stripe symptoms. The antibacterial activity of albicidin also confers on X. albilineans a competitive advantage against rival bacteria during sugarcane colonization. Recent chemical studies have uncovered the unique structure of albicidin and allowed us to partially elucidate its fascinating biosynthesis apparatus, which involves an enigmatic hybrid PKS/NRPS (polyketide synthase/non-ribosomal peptide synthetase) machinery
Techno-functional, textural and sensorial properties of frankfurters as affected by the addition of bee pollen powder
The objective of this study was to determine whether the addition of different pollen powder concentrations (0.5; 1.0 and 1.5 g/100 g) had an influence on techno-functional, textural and sensorial traits of frankfurters. Examining the techno-functional characteristics of pollen, a conclusion was reached that the higher the concentration, the higher the emulsification and better techno-functional properties. Also, FTIR-ATR analysis has shown that specific pollen molecules provided good emulsifying properties of sausages. On the other hand, sensory analysis showed that sausages with the addition of 1.0% and 1.5% of pollen powder have a more pronounced floral odor. Warner-Bratzler shear force test has shown that the incorporation of pollen caused a more stable product throughout sixty days of storage than the control sample. It could be explained by the formation of more protein-protein interactions due to the addition of non-meat proteins in the formulation of frankfurters and obtaining a more stable product than the control one. All things considered, it can be concluded that pollen exhibits good techno-functional properties and could be utilized in the formulation of frankfurters with improved and steady techno-functional properties during two months of refrigerated storage
Anatomie chirurgicale de la glande sublinguale
Because of its position, the sublingual gland is clinically important especially in the events of injuries and infections in the anterior part of the sublingual region.The morphology and relationships of this gland were studied by dissection methods applied on 80 fresh or formaldehyde fixed preparations of the mouth floor and of the tongue, which were partly (31 preparations) taken out together with the mandible.As for the shape of the gland, three main types were found: 1° the cuneiform type which was the most frequent (71 %), 2° the pyramidal type which was less frequent (16%) and the fusiform type (13%) which comprised the cases of a very elongated gland (up to 65 mm).The space in which the gland lied had four walls. Its internal wall consisted of the mylohyoid muscle and it comprised the hyoglossus muscle as well when the gland was very elongated. The inferior wall consisted of the mylohyoid muscle and sometimes it comprised also a narrow part of the superior surface of the geniohyoglossus muscle. An osseous depression on the internal side of the mandible represented the external wall of the sublingual gland space. The superior wall is clinically the most significant. It consists of the sublingual mucosa and a sublingual fold. This wall represents a main surgical access to the gland. In edentulous mandibles this mucous fold may be at the level of the upper mandibular border which may hinder the use of the lower dental prosthesis.La morphologie et les rapports de la glande sublinguale ont été étudiés par 80 dissections du plancher de la bouche et de la langue.Trois types différents de glandes ont été définis du point de vue forme: le type cunéiforme (71%), le type pyramidal (16%) et le type fusiforme (13%).La loge de la glande sublinguale possède quatre parois: deux (parois inférieure et interne) de nature musculaire, une (paroi externe) de nature osseuse et une (paroi supérieure) de nature muqueuse
Altérations athéroscléreuses de l’artère dentaire inférieure en corrélation avec celles de la bifurcation carotidienne et de l’aorte abdominale
50 corpses from adults aged 20 to 75 have been used in order to study the atherosclerotic lesions occurring in typical regions (bifurcation of the common carotid artery and the abdominal aorta) and their relationship to atherosclerotic changes in the inferior alveolar artery. Histological analysis revealed that atherosclerotic alterations of the inferior alveolar artery may appear sometimes earlier than it would be expected on the ground of age. Intima cell proliferation and thickening of elastic elements in the middle layer of the arterial wall, the first signs of atherosclerosis, were found already at the beginning of the third decade of life when the signs of this process in the typical regions were not yet evident. Atherosclerosis affects essentially the functional capacity of the inferior alveolar artery. The development of atherosclerosis in the wall of this artery favours an hypovascularization of the mandible, which must be of certain importance in every operative procedure in oral surgery, especially in those inducing a severe and long traumatism in bone and soft tissues, such as dental implantations.Cette étude, faite sur 50 cadavres (de 20 à 75 ans) concerne les altérations athéroscléreuses de l’artère dentaire inférieure et leurs rapports avec les altérations athéroscléreuses dans les territoires typiques (bifurcation carotidienne et aorte abdominale). L’examen histologique a fait apparaître que les altérations athéroscléreuses de l’artère dentaire inférieure peuvent être relativement plus évidentes et précoces que l’on ne s’y attendrait compte tenu de l’âge. Une prolifération cellulaire de l’intima et un épaississement de la lame élastique moyenne dans la paroi artérielle, premiers signes de l’athérosclérose, peuvent apparaître dès30 ans, alors que l’on ne trouve pas encore d’altérations de ce type dans les territoires typiques. L’athérosclérose a une influence cruciale sur la capacité fonctionnelle de l’artère dentaire inférieure puisque celle-ci chemine dans le canal osseux, qui empêche sa dilatation. Le développement de l’athérosclérose dans la paroi de cette artère favorise une hypovascularisation de la mandibule, ce qui a une importance certaine lors de toute intervention en chirurgie orale, surtout lorsqu’elle entraîne un traumatisme grave et prolongée de l’os et des parties molles, comme c’est le cas lors de l’insertion d’implants dentaires
La structure osseuse de la branche montante de la mandibule
Osseous structure of the ramus of mandible (RM) is of a practical clinical significance. Osteosynthesis of fractured segments and the success of the sagittal or the horizontal ramus split osteotomy depends on the cortical bone disposition and thickness.After morphometric investigations of the RM, conducted on 70 mandibles of adults, consecutive horizontal and frontal sections were made. On these sections, the cortical layer was studied and the cortical bone thickness was measured at four previously marked points.In the regard of morphometry, the significant datum is that nearly half of all the cases is grouped round the mean value of any parameter.Cortical bone is continuous and its two main sheets are the buccal and the lingual cortical plates. In its entirety, the buccal cortical plate is thicker than the lingual. The thickness of both cortical plates increases in the direction from the coronoid process to the angle of mandible.L’ostéosynthèse de la branche montante de la mandibule et le succès de l’ostéotomie sagittale ou horizontale de cette branche dépendent de la disposition et de l’épaisseur de sa couche osseuse compacte. Les examens morphométriques qui ont été faits sur 70 mandibules des sujets adultes montrent que presque la moitié de tous les cas se groupent autour de la valeur moyenne des paramètres mesurés (schéma 1 et tableau I).Sur les coupes horizontales et frontales, l’épaisseur des lames compactes buccale et linguale a été mesurée dans certains points prédéterminés et il a été établi que la lame buccale est toujours plus épaisse (schéma 2 et tableau II)
Les rapports du canal mandibulaire avec les faces externes du corps de la mandibule et risques qui en découlent de le léser
The investigations of relations and position of the mandibular canal (CM) were carried out on 80 mandibles (33 dentulous, 27 partly edentulous and 20 completely edentulous).The studies of relations of CM to the sides of mandibular body were accomplished by morphometric analysis of CM on consecutive transversal sections of mandibular body (54 preparations). The relation of the CM to be buccal or to the lingual side is expressed as the distance from the surface of the correspondent side of the mandibular body, which is shown in Table 1. According to these data, the position of the canal is at first proximate to the lingual side, and from the first molar tooth (M1) it approaches the buccal surface of the mandibular body.The position of the entire CM was determined by analysis of mandibular preparations (26) after removing the buccal osseous lamina. These investigations revealed that the position of the CM is predominantly buccal. Reconstruction of relations of the CM to the sides of mandibular body, according to the data obtained from transversal sections, and the real position of the CM are presented in Scheme I.The difference in direction lines of relations and of predominant position of the CM is a consequence of morphological characteristics of mandibular body.Le CM a été étudié sur 80 mandibules (dont 33 avec la denture conservée, 27 peu édentées et 20 totalement édentées). L’analyse morphométrique des rapports du CM a été faite sur les coupes frontales de la mandibule (54). La position du CM en entier a été examinée après la trépanation du corps mandibulaire (26 préparations). La reconstruction des rapports du CM d’après les données obtenues sur les coupes fait apparaître que le canal a d’abord une position linguale, ensuite il croise la M1 et se termine dans une position buccale. Dans la plupart des cas, le CM a, dans la majeure partie de son trajet, une position buccale à cause de la configuration caractéristique du corps mandibulaire
- …