Typicality vs. probability in trajectory-based formulations of quantum mechanics

Bohmian mechanics represents the universe as a set of paths with a probability measure defined on it. The way in which a mathematical model of this kind can explain the observed phenomena of the universe is examined in general. It is shown that the explanation does not make use of the full probability measure, but rather of a suitable set function deriving from it, which defines relative typicality between single-time cylinder sets. Such a set function can also be derived directly from the standard quantum formalism, without the need of an underlying probability measure. The key concept for this derivation is the {\it quantum typicality rule}, which can be considered as a generalization of the Born rule. The result is a new formulation of quantum mechanics, in which particles follow definite trajectories, but which is only based on the standard formalism of quantum mechanics.Comment: 24 pages, no figures. To appear in Foundation of Physic

Finite element analysis applied to redesign of submerged entry nozzles for steelmaking

The production of steel by continuous casting is facilitated by the use of refractory hollow-ware components. A critical component in this process is the submerged entry nozzle (SEN). The normal operating conditions of the SEN are arduous, involving large temperature gradients and exposure to mechanical forces arising from the flow of molten steel; experimental development of the components is challenging in so hazardous an environment. The effects of the thermal stress conditions in relation to a well-tried design were therefore simulated using a finite element analysis approach. It was concluded from analyses that failures of the type being experienced are caused by the large temperature gradient within the nozzle. The analyses pointed towards a supported shoulder area of the nozzle being most vulnerable to failure and practical in-service experience confirmed this. As a direct consequence of the investigation, design modifications, incorporating changes to both the internal geometry and to the nature of the intermediate support material, were implemented, thereby substantially reducing the stresses within the Al2O3/graphite ceramic liner. Industrial trials of this modified design established that the component reliability would be significantly improved and the design has now been implemented in series production

Inflammation, neurodegeneration and protein aggregation in the retina as ocular biomarkers for Alzheimer’s Disease in the 3xTg-AD mouse model

Alzheimer's disease (AD) is the most common cause of dementia in the elderly. In the pathogenesis of AD a pivotal role is played by two neurotoxic proteins that aggregate and accumulate in the central nervous system: amyloid beta and hyper-phosphorylated tau. Accumulation of extracellular amyloid beta plaques and intracellular hyper-phosphorylated tau tangles, and consequent neuronal loss begins 10-15 years before any cognitive impairment. In addition to cognitive and behavioral deficits, sensorial abnormalities have been described in AD patients and in some AD transgenic mouse models. Retina can be considered a simple model of the brain, as some pathological changes and therapeutic strategies from the brain may be observed or applicable to the retina. Here we propose new retinal biomarkers that could anticipate the AD diagnosis and help the beginning and the follow-up of possible future treatments. We analyzed retinal tissue of triple-transgenic AD mouse model (3xTg-AD) for the presence of pathological hallmarks during disease progression. We found the presence of amyloid beta plaques, tau tangles, neurodegeneration, and astrogliosis in the retinal ganglion cell layer of 3xTg-AD mice, already at pre-symptomatic stage. Moreover, retinal microglia in pre-symptomatic mice showed a ramified, anti-inflammatory phenotype which, during disease progression, switches to a pro-inflammatory, less ramified one, becoming neurotoxic. We hypothesize retina as a window through which monitor AD-related neurodegeneration process

Sensitivity plots for WIMP direct detection using the annual modulation signature

Annual modulation due to the Earth's motion around the Sun is a well known signature of the expected WIMP signal induced in a solid state underground detector. In the present letter we discuss the prospects of this technique on statistical grounds, introducing annual-modulation sensitivity plots for the WIMP-nucleon scalar cross section for different materials and experimental conditions. The highest sensitivity to modulation is found in the WIMP mass interval 10 GeV< m_W < 130 GeV, the actual upper limit depending from the choice of the astrophysical parameters, while the lowest values of the explorable WIMP-nucleon elastic cross-sections fall in most cases within one order of magnitude of the sensitivities of present direct detection WIMP searches.Comment: 24 pages, ReVTeX, 9 figures, submitted to Astroparticle Physic

Proof-of-principle of a new geometry for sampling calorimetry using inorganic scintillator plates

A novel geometry for a sampling calorimeter employing inorganic scintillators as an active medium is presented. To overcome the mechanical challenges of construction, an innovative light collection geometry has been pioneered, that minimises the complexity of construction. First test results are presented, demonstrating a successful signal extraction. The geometry consists of a sampling calorimeter with passive absorber layers interleaved with layers of an active medium made of inorganic scintillating crystals. Wavelength-shifting (WLS) fibres run along the four long, chamfered edges of the stack, transporting the light to photodetectors at the rear. To maximise the amount of scintillation light reaching the WLS fibres, the scintillator chamfers are depolished. It is shown herein that this concept is working for cerium fluoride (CeF$_3$) as a scintillator. Coupled to it, several different types of materials have been tested as WLS medium. In particular, materials that might be sufficiently resistant to the High-Luminosity Large Hadron Collider radiation environment, such as cerium-doped Lutetium-Yttrium Orthosilicate (LYSO) and cerium-doped quartz, are compared to conventional plastic WLS fibres. Finally, an outlook is presented on the possible optimisation of the different components, and the construction and commissioning of a full calorimeter cell prototype is presented.Comment: Submitted to Proceedings CALOR 2014, the 16th International Conference on Calorimetry in High-Energy Physics, Giessen (Germany) 6 - 11 April 2014. To be published in Journal of Physics: Conference Series (10 pages, 15 figures

Angle-dependence of the Hall effect in HgBa2CaCu2O6 thin films

Superconducting compounds of the family Hg-Ba-Ca-Cu-O have been the subject of intense study since the current record-holder for the highest critical temperature of a superconductor belongs to this class of materials. Thin films of the compound with two adjacent copper-oxide layers and a critical temperature of about 120 K were prepared by a two-step process that consists of the pulsed-laser deposition of precursor films and the subsequent annealing in mercury-vapor atmosphere. Like some other high-temperature superconductors, Hg-Ba-Ca-Cu-O exhibits a specific anomaly of the Hall effect, a double-sign change of the Hall coefficient close to the superconducting transition. We have investigated this phenomenon by measurements of the Hall effect at different angles between the magnetic field direction and the crystallographic c-axis. The results concerning the upper part of the transition, where the first sign change occurs, are discussed in terms of the renormalized fluctuation model for the Hall conductivity, adapted through the field rescaling procedure in order to take into account the arbitrary orientation of the magnetic field.Comment: to be published in Phys. Rev.

Sensitivity plots for WIMP modulation searches

Prospects of WIMP searches using the annual modulation signature are discussed on statistical grounds, introducing sensitivity plots for the WIMP-nucleon scalar cross section.Comment: 3 pages, 2 figures, talk given at TAUP'99, september 199

Bridging aortic valve surgery to 21st century. what can a surgeon do

Aortic valve stenosis is the most clinically relevant valvular heart disease in the elderlies. Surgical aortic valve replacement (SAVR) represented, for decades, the standard of care for the treatment of severe aortic stenosis. Although SAVR still represents a valid option in this clinical scenario, transcatheter aortic valve implantation proved to be superior to medical therapy and comparable to SAVR in several randomized trials in patients at high or intermediate operative risk. At the same time, the growing aging population carrying on greater morbidities and high risk profiles has led to the development of minimally invasive technologies, as rapid deployment aortic valve replacement or Sutureless, to minimize surgical impact on patients. The Heart Team is nowadays tasked to determine the best option tailored for each patient considering patient-related factors and mastering all the surgical options in terms of both different techniques and types of available valves. Nevertheless, some open issues need to be already answered as: which has the longest durability, which the lower complication rate and the lower overall mortality. The aim of this review is to briefly resume the main features of these different options and explore what kind of open questions these newer-generation prosthetic valves and delivery devices carry

An International Survey on Taking Up a Career in Cardiovascular Research: Opportunities and Biases toward Would-Be Physician-Scientists

Background Cardiovascular research is the main shaper of clinical evidence underpinning decision making, with its cyclic progression of junior researchers to mature faculty members. Despite efforts at improving cardiovascular research training, several unmet needs persist. We aimed to appraise current perceptions on cardiovascular research training with an international survey. Methods and Results We administered a 20-closed-question survey to mentors and mentees belonging to different international institutions. A total of 247 (12%) surveys were available (out of 2,000 invitations). Overall, mentees and mentors were reasonably satisfied with the educational and research resources. Significant differences were found analyzing results according to gender, geographic area, training and full-time researcher status. Specifically, women proved significantly less satisfied than men, disclosed access to fewer resources and less support from mentors (all P Conclusions Several potential biases appear to be present in the way training in cardiovascular research is provided worldwide, including one against women. If confirmed, these data require proactive measures to decrease discriminations and improve the cardiovascular research training quality