813 research outputs found

    Design and standalone characterisation of a capacitively coupled HV-CMOS sensor chip for the CLIC vertex detector

    Get PDF
    The concept of capacitive coupling between sensors and readout chips is under study for the vertex detector at the proposed high-energy CLIC electron positron collider. The CLICpix Capacitively Coupled Pixel Detector (C3PD) is an active High-Voltage CMOS sensor, designed to be capacitively coupled to the CLICpix2 readout chip. The chip is implemented in a commercial 180180 nm HV-CMOS process and contains a matrix of 128×128128\times128 square pixels with 2525 μ\mum pitch. First prototypes have been produced with a standard resistivity of ∼20\sim20 Ω\Omegacm for the substrate and tested in standalone mode. The results show a rise time of ∼20\sim20 ns, charge gain of 190190 mV/ke−^{-} and ∼40\sim40 e−^{-} RMS noise for a power consumption of 4.84.8 μ\muW/pixel. The main design aspects, as well as standalone measurement results, are presented.Comment: 13 pages, 13 figures, 2 tables. Work carried out in the framework of the CLICdp collaboratio

    Hardening and non-associated flow NURBS plasticity.

    Get PDF
    In numerical analysis the failure of engineering materials is controlled through specifying yield envelopes (or surfaces) that bound the allowable stress in the material. Simple examples include the prismatic von Mises (circle) and Tresca (hexagon) yield surfaces. However, each surface is distinct and requires a specific equation describing the shape of the surface to be formulated in each case. These equations impact on the numerical implementation (specifically relating to stress integration) of the models and therefore a separate algorithm must be constructed for each model. Recently a framework was proposed that allows any isotropic yield surface to be represented by a NURBS surface and the constitutive model formulated using the name numerical algorithm. This paper presents, for the first time, an extension to this framework to allow both hardening (expansion/contraction of the surfaces) and a non-associated plastic flow rule. As with previous work on NURBS plasticity, the constitutive framework is combined with an implicit backward-Euler-type stress integration algorithm. The numerical performance of the algorithm is demonstrated using both material point investigations and boundary value simulations

    Effect of Litter Treatment on the Occurrence of Foot Pad Lesions

    Get PDF
    Pododermatitis (foot pad lesions) is one of the main welfare problems in modern broiler production in countries with developed poultry farming. Factors contributing to the occurrence of these lesions are nutrition, stocking density and material used for litter. There are a number of different procedures that can be applied in order to prevent and reduce the number of lesions with the most pronounced defects. The experiment was conducted on broiler chickens grown in 10 buildings of 240 m2 each. The stocking density was 35 kg/m2. The experiment was set up in five treatments with two replicates. Treatment one (T1) - control with a straw litter, treatment two (T2) - litter treated with microbial preparation Micropan®, treatment three (T3) – litter with addition of lignin, treatment four (T4) – litter with addition of lignin and Micropan® and treatment five (T5) - chopped straw without supplements. At the end of the experiment, on day 42 the intensity of the lesions was scored on the slaughter line. The presence of lesions was scored using scale from 0 (no lesions) to 3 (plantar pads with more than 50% damage). Based on the results of the trial it can be concluded that litter has a significant impact on the presence and the degree of foot pad lesions. The lowest score of foot pad lesions was observed in the treatment T5 (chopped straw). Different treatments of litters may also contribute to the solution of the problem of pododermatitis since the results in all treated groups (T2, T3, T4 and T5) were better when compared to the control

    Prototyping of an HV-CMOS demonstrator for the High Luminosity-LHC upgrade

    Get PDF
    HV-CMOS sensors can offer important advantages in terms of material budget, granularity and cost for large area tracking systems in high energy physics experiments. This article presents the design and simulated results of an HV-CMOS pixel demonstrator for the High Luminosity-LHC. The pixel demonstrator has been designed in the 0.35 μm HV-CMOS process from ams AG and submitted for fabrication through an engineering run. To improve the response of the sensor, different wafers with moderate to high substrate resistivities are used to fabricate the design. The prototype consists of four large analog and standalone matrices with several pixel flavours, which are all compatible for readout with the FE-I4 ASIC. Details about the matrices and the pixel flavours are provided in this article

    Optimum spectral window for imaging of art with optical coherence tomography

    Get PDF
    Optical Coherence Tomography (OCT) has been shown to have potential for important applications in the field of art conservation and archaeology due to its ability to image subsurface microstructures non-invasively. However, its depth of penetration in painted objects is limited due to the strong scattering properties of artists’ paints. VIS-NIR (400 nm – 2400 nm) reflectance spectra of a wide variety of paints made with historic artists’ pigments have been measured. The best spectral window with which to use optical coherence tomography (OCT) for the imaging of subsurface structure of paintings was found to be around 2.2 μm. The same spectral window would also be most suitable for direct infrared imaging of preparatory sketches under the paint layers. The reflectance spectra from a large sample of chemically verified pigments provide information on the spectral transparency of historic artists’ pigments/paints as well as a reference set of spectra for pigment identification. The results of the paper suggest that broadband sources at ~2 microns are highly desirable for OCT applications in art and potentially material science in general

    Comparison of diuretic strategies in diuretic-resistant acute heart failure: A systematic review and network meta-analysis

    Get PDF
    OBJECTIVE: Up to 50% of patients hospitalized for acute heart failure (AHF) show resistance to diuretics. This condition contributes to a prolonged hospital length of stay and a higher risk of death. This review aimed to investigate whether a diuretic therapeutic approach more effective than furosemide alone exists for patients with diuretic-resistant AHF. MATERIALS AND METHODS: We identified all randomized controlled trials (RCTs) evaluating diuretic therapy in patients with diuretic-resistant AHF. We searched Pubmed, BioMed Central, and Cochrane CENTRAL databases. RESULTS: Six RCTs were identified, involving a total of 845 patients. The P-score ranges from 0.6663 for furosemide to 0.2294 for the tolvaptan-furosemide. We found no significant differences in efficacy for any drug comparison. CONCLUSIONS: None of the diuretics considered in RCTs performed to date (tolvaptan, metolazone, hydrochlorothiazide, indapamide) appear to be more effective than furosemide therapy alone for the treatment of patients with diuretic-resistant AHF
    • …
    corecore