Optimal Scheduling of Multiproduct Pipeline System Using MILP Continuous Approach

Part 5: Planning and Scheduling; International audience; To date, the multiproduct pipeline transportation mode has nationally and internationally considerably evolved thanks to his efficiently and effectively of transporting several products. In this paper, we focus our study on the scheduling of a multiproduct pipeline system that receives a number of petroleum products (fuels) from a single refinery source in order to be distributed to several storage and distribution centers (depots). Mixed Integer Linear Programming (MILP) continuous mathematical approach is presented to solve this problem. The sequence of injected products in the same pipeline should be carefully studied, in order to meet market demands and ensure storage autonomy of the marketable pure products in the fuels depots on the one hand and to minimize the number of interfaces; Birth zone of mixture between two products in contact and in sequential flow, which may hinder the continuous operation of the pipeline system, by the necessity of additional storage capacity for this last mixture, that is in no way marketable and requires special processing operations. This work is applied on a real case of a multiproduct pipeline that feeds the western and southwestern region of Algeria with fuels. The obtained results based on the MILP continuous approach give an optimal scheduling of the multiproduct transport system with a minimized number of interfaces. Document type: Conference objec

Evaluation the genetic diversity of advanced lentil genoty pesunder the drought stress and non-stress conditions

To evaluate genetic diversity of advanced lentil lines, screening quantitative indices of drought resistance, and identifying drought resistant lines, 11 varieties, one advanced lentil line and one selected genotype from Ardabil local mass in a randomized complete block design (RCBD) with 3 replications under both stress (rain-fed) and non-stress (irrigated) conditions in the Station of Agricultural and Natural Research of Ardabil. Based on yields obtained under irrigation (YP) and rain-fed (YS) conditions, several quantitative drought tolerance indices, like mean productivity (MP), tolerance index (TOL), geometric mean productivity (GMP), harmonic mean (HARM), stress susceptibility index (SSI) and stress tolerance index (STI) were used to evaluate the drought responses of these genotypes. Evaluation of quantitative indices of drought resistance and considering the means quantities and correlation coefficients between such indices, based on grain yield and under both rain-fed and irrigated conditions indicated that indices (MP), (HARM), (GMP) and (STI) are considered as the best indices of Lentil genotypes response with stress intensity of (SI = 0.29) under drought stress. In 3-D graph, it has been showed that with considering these indices and grain yield and under rain-fed and irrigated conditions, genotypes ILL 6031, ILL 9893 and ILL 8095 will be as the produced highest seed yields and drought resistant lines in group A. Multivariate Biplot graph indicated that genotypes ILL 6031, ILL 9893 and ILL 8095 were located next to the vectors of drought resistance indices, as: MP, HARM, GMP and STI. Distribution of the genotypes in the Biplot space indicated the presence of genetic diversity among the lines for drought stress. Diagrams obtained from cluster analysis based on above indices showed that the farthest genetic distance in related to drought resistant lines with highest seed yields (ILL 6031, ILL 9893 and ILL 8095) and drought susceptible lines and lowest seed yields (ILL 8173, ILL 9832, ILL 1878 and ILL 8146)

Study on relations between relative water content, cell membrane stability and duration of growth period with grain yield of lentil genotypesunder drought stress and non-stress conditions

Drought is one of the most important abiotic stresses that limits crop production in arid and semi-arid regions of the world. Lentil (Lens culinaris L.), a valuable legume crop, is produced mainly rain-fed in Iran. An experiment was conducted to study the relationships between relative water content (RWC), cell membrane stability (CMS) and duration of growth period with grain yield of 11 advanced genotypes, varieties and a local genotype in the Ardabil Agriculture and Natural Resources research Station. Experimental design was a randomized complete block design (RCBD) with three replication under both rain-fed and irrigated conditions. Combined ANOVA showed significant differences among all the evaluated traits. Significant differences between characters reveals that there are high variation between the traits studied. Means for characters under study showed that grain yield, RWC, CMS and duration of growth period decreased in rain-fed condition but cell membrane leakage (electric conductivity) increased. Correlation coefficients showed strongly positive relation between grain yield with RWC (r0.98**), strongly negative and non significant CMS (r-0.32ns) and strongly negative relation between grain yield and the days to maturity (r-0.78**). The results of the experiment also revealed that there weren’t a strong relation between yield and calculated attributes for drought tolerance except RWC. Therefore, this character could be effective in evaluation of drought tolerance and identification of high yielding genotypes (ILL 6031, ILL 9893 and ILL 8095)

Behavior, for the Lorca earthquake on 11-05-2011, of wide beam building designed without seismic considerations

El terremoto de Lorca (11-05-2011) fue el movimiento sísmico más destructivo registrado en España, a pesar de su moderada magnitud. Este artículo describe la simulación numérica de la respuesta dinámica, al registro principal del terremoto de Lorca, de seis edificios de tres y seis plantas con forjados unidireccionales de hormigón con vigas planas; estos edificios fueron proyectados sin tener en cuenta la acción sísmica. Se ha elegido esta tipología constructiva por presentar, potencialmente, una elevada vulnerabilidad sísmica. Los seis edificios han sido seleccionados para representar un número importante de edificios de este tipo existentes en zonas de sismicidad baja o media (como Lorca) de España y correspondientes a los años 1974-1994, posteriores a la PDS-1 1974 y previos a la NCSE-94. Los resultados obtenidos muestran que estos edificios, aun contando con la cooperación de los muros, no poseen capacidad para resistir la componente más intensa del registro de Lorca.The recent earthquake in Lorca (11-05-2011) was the most destructive recorded event in Spain, despite its moderate magnitude. This paper describes the numerical simulation of the dynamic response to the main record of the Lorca earthquake of six 3 and 6-story buildings with one-way concrete slabs with wide beams; these buildings were designed without any seismic consideration. We have chosen this type of construction because it is potentially highly vulnerable. The six considered buildings were selected to represent a large number of buildings of this type in areas of low-to-medium seismicity (as Lorca) of Spain along the period 1974-1994. The results show that these buildings, even with the cooperation of the walls, do not have sufficient capacity to withstand the most severe component of the Lorca record.Este trabajo ha sido financiado por el gobierno de España, proyectos CGL2008-00869/BTE, CGL2011-23621, BIA2008- 00050 y BIA2011-26816 y por la Unión Europea (fondos Feder)

Prevalence of influenza A infection in the Middle-East: A systematic review and meta-analysis

Objective: This systematic review and meta-analysis was performed to determine the prevalence rate of influenza virus from different parts of Middle East region, and present an overall relative frequency (RF) for this region. Methods: The authors performed a systematic literature review from several reliable databases such as PubMed, ISI Web of Science and Scopus during 2000�2016. Furthermore, the keywords of this research were �Influenza�, �Subtype�, �Seroprevalence�, �Incidence�, �Seroepidemiology�, �H1N1�, �H3N2�, �H5N1�, �H9N2�, �Middle-East� and �Meta-analysis�. The reported data were selected according to inclusion and exclusion criteria. Results: The authors selected 71 studies out of 1147 for the present review. The overall estimation of the prevalence of influenza virus was 10.2 95% confidence interval (CI): 10.1%�10.3%. However, based on our records, the evident heterogeneity of influenza virus was observed among the studies (Cochran Q test, P value <.001 and I-squared = 100%). It should be noted that influenza virus infection's RF varied from 0.5% in Qatar to 70% in Syria. Conclusions: The results of this review are remarkable, they show that influenza infection RF is variable due to several factors. Thus, further researches should be taken to minimize the emergence and transmission of influenza virus. © 2018 John Wiley & Sons Lt

Prevalence of influenza A infection in the Middle-East: A systematic review and meta-analysis

Objective: This systematic review and meta-analysis was performed to determine the prevalence rate of influenza virus from different parts of Middle East region, and present an overall relative frequency (RF) for this region. Methods: The authors performed a systematic literature review from several reliable databases such as PubMed, ISI Web of Science and Scopus during 2000�2016. Furthermore, the keywords of this research were �Influenza�, �Subtype�, �Seroprevalence�, �Incidence�, �Seroepidemiology�, �H1N1�, �H3N2�, �H5N1�, �H9N2�, �Middle-East� and �Meta-analysis�. The reported data were selected according to inclusion and exclusion criteria. Results: The authors selected 71 studies out of 1147 for the present review. The overall estimation of the prevalence of influenza virus was 10.2 95% confidence interval (CI): 10.1%�10.3%. However, based on our records, the evident heterogeneity of influenza virus was observed among the studies (Cochran Q test, P value <.001 and I-squared = 100%). It should be noted that influenza virus infection's RF varied from 0.5% in Qatar to 70% in Syria. Conclusions: The results of this review are remarkable, they show that influenza infection RF is variable due to several factors. Thus, further researches should be taken to minimize the emergence and transmission of influenza virus. © 2018 John Wiley & Sons Lt

Mechanical Properties and Microstructural Characterization of Aged Nickel-based Alloy 625 Weld Metal

The aim of this work was to evaluate the different phases formed during solidification and after thermal aging of the as-welded 625 nickel-based alloy, as well as the influence of microstructural changes on the mechanical properties. The experiments addressed aging temperatures of 650 and 950 A degrees C for 10, 100, and 200 hours. The samples were analyzed by electron microscopy, microanalysis, and X-ray diffraction in order to identify the secondary phases. Mechanical tests such as hardness, microhardness, and Charpy-V impact test were performed. Nondestructive ultrasonic inspection was also conducted to correlate the acquired signals with mechanical and microstructural properties. The results show that the alloy under study experienced microstructural changes when aged at 650 A degrees C. The aging was responsible by the dissolution of the Laves phase formed during the solidification and the appearance of gamma aEuro(3) phase within interdendritic region and fine carbides along the solidification grain boundaries. However, when it was aged at 950 A degrees C, the Laves phase was continuously dissolved and the excess Nb caused the precipitation of the delta-phase (Ni3Nb), which was intensified at 10 hours of aging, with subsequent dissolution for longer periods such as 200 hours. Even when subjected to significant microstructural changes, the mechanical properties, especially toughness, were not sensitive to the dissolution and/or precipitation of the secondary phases

Quality of drinking water in Kashan in 1999-2000

Background : Surveying drinking water quality, a priority for research subjects, seeks further attentions and their standards are determined according to the microbial, chemical, and physical quality as well as their applications. The microbial quality is measured by means of the presence of special pathogens. Thus in case of special pathogens presence we would consider the drinking water to be infected. Materials and methods : This descriptive study was conducted to determine the quality of drinking water in Kashan city in 1999-2000. To meet this demand, Kashan was divided in 11 districts, then samples were gathered in accordance to the number of their resistance as well as industrial standard of water. Coliform contamination, and stool coliform were determined. Results : During the study period, 340 samples were gathered, of which 261 (76.8) had MPN of zero whereas 79 (32.2) and 39 (11.5) had MPN of greater than zero and 3, respectively. Totally, 27 samples have shown contamination of coliform type. Contamination was revealed to be maximum in the third and minimum in the 11th month of sampling (16 samples vs. zero sample). Among districts, Lethar and Moallem Square have shown the highest and the least percentage of contamination (60 vs. 17.1). Conclusion : We have found still a great gap between the quality of drinking water in Kashan as compared to the standard measures. Since providing drinking water with the highest quality is of utmost importance in the society health, further attentions should be paid to the monitoring systems and also the sources of contamination