Effect of lateral displacement of a high-altitude platform on cellular interference and handover

A method for predicting movements in cellular coverage caused by lateral drift of a high-altitude platform (a quasi-stationary platform in the stratosphere) is developed. Cells are produced by spot beams generated by horn-type antennas on the platform. It is shown how the carrier-to-interference ratio (CIR) across these cells varies when the antenna payload is steered to accommodate the lateral movement of the platform. The geometry of the antenna beam footprint on the ground is first developed and then applied to a system of many cochannel beams. Pointing strategies are examined, where the pointing angle is calculated to keep, for example, a center cell or an edge cell in the same nominal position before and after the platform drift, and the CIR distribution is calculated. It is shown that the optimum pointing angle depends on the desired level of CIR across the service area, typically lying between 3 +/- 0.75 degrees for a platform drift of 2'km and corresponding to a cell in the middle ring. It is shown that it is necessary for a significant proportion of users to perform a handover to maintain a given CIR after platform drift. The analysis reveals that there is an optimum pointing angle that minimizes the probability of handover for a particular value of drift and CIR

A computer system to perform structure comparison using TOPS representations of protein structure

We describe the design and implementation of a fast topology–based method for protein structure comparison. The approach uses the TOPS topological representation of protein structure, aligning two structures using a common discovered pattern and generating measure of distance derived from an insert score. Heavy use is made of a constraint-based pattern matching algorithm for TOPS diagrams that we have designed and described elsewhere Gilbert et al. (1999). The comparison system is maintained at the European Bioinformatics Institute and is available over the Web via the at tops.ebi.ac.uk/tops. Users submit a structure description in Protein Data Bank (PDB) format and can compare it with structures in the entire PDB or a representative subset of protein domains, receiving the results by email

Optimizing an array of antennas for cellular coverage from a high altitude platform

In a wireless communications network served by a high altitude platform (HAP) the cochannel interference is a function of the antenna beamwidth, angular separation and. sidelobe level. At the millimeter wave frequencies proposed for HAPs, an array of aperture type antennas on the platform is a practicable solution for serving the cells. We present a method for predicting cochannel interference based on curve-fit approximations for radiation patterns of elliptic beams which illuminate cell edges with optimum power, and a means of estimating optimum beamwidths for each cell of a regular hexagonal layout. The method is then applied to a 121 cell architecture. Where sidelobes are modeled As a flat floor at 40-dB below peak directivity, a cell cluster size of four yields carrier-to-interference ratios (CIRs), which vary from 15 dB at cell edges to 27 dB at cell centers. On adopting a cluster size of seven, these figures increase, respectively, to 19 and 30 dB. On reducing the sidelobe level, the. improvement in CIR can be quantified. The method also readily allows for regions of overlapping channel coverage to be shown

Improving the system capacity of broadband services using multiple high-altitude platforms

A method of significantly improving the capacity of high-altitude platform (HAP) communications networks operating in the millimeter-wave bands is presented. It is shown how constellations of HAPs can share a common frequency allocation by exploiting the directionality of the user antenna. The system capacity of such constellations is critically affected by the minimum angular separation of the HAPs and the sidelobe level of the user antenna. For typical antenna beamwidths of approximately 5/spl deg/ an inter-HAP spacing of 4 km is sufficient to deliver optimum performance. The aggregate bandwidth efficiency is evaluated, both theoretically using the Shannon equation, and using practical modulation and coding schemes, for multiple HAP configurations delivering either single or multiple cells. For the user antenna beamwidths used, it is shown that capacity increases are commensurate with the increase in the number of platforms, up to 10 HAPs. For increases beyond this the choice of constellation strategy becomes increasingly important

Potential impact of iodine on tropospheric levels of ozone and other critical oxidants

A new analysis of tropospheric iodine chemistry suggests that under certain conditions this chemistry could have a significant impact on the rate of destruction of tropospheric ozone. In addition, it suggests that modest shifts could result in the critical radical ratio HO2/OH. This analysis is based on the first ever observations of CH3I in the middle and upper free troposphere as recorded during the NASA Pacific Exploratory Mission in the western Pacific. Improved evaluations of several critical gas kinetic and photochemical rate coefficients have also been used. Three iodine source scenarios were explored in arriving at the above conclusions. These include: (1) the assumption that the release of CH3I from the marine environment was the only iodine source with boundary layer levels reflecting a low-productivity source region, (2) same as scenario 1 but with an additional marine iodine source in the form of higher molecular weight iodocarbons, and (3) source scenario 2 but with the release of all iodocarbons occurring in a region of high biological productivity. Based on one-dimensional model simulations, these three source scenarios resulted in estimated Ix (Ix =I + IO + HI + HOI + 2I2O2 +INOx) yields for the upper troposphere of 0.5, 1.5, and 7 parts per trillion by volume (pptv), respectively. Of these, only at the 1.5 and 7 pptv level were meaningful enhancements in O3 destruction estimated. Total column O3 destruction for these cases averaged 6 and 30%, respectively. At present we believe the 1.5 pptv Ix source scenario to be more typical of the tropical marine environment; however, for specific regions of the Pacific (i.e., marine upwelling regions) and for specific seasons of the year, much higher levels might be experienced. Even so, significant uncertainties still remain in the proposed iodine chemistry. In particular, much uncertainty remains in the magnitude of the marine iodine source. In addition, several rate coefficients for gas phase processes need further investigating, as does the efficiency for removal of iodine due to aerosol scavenging processes. Copyright 1996 by the American Geophysical Union

Flutter: A finite element program for aerodynamic instability analysis of general shells of revolution with thermal prestress

Documentation for the computer program FLUTTER is presented. The theory of aerodynamic instability with thermal prestress is discussed. Theoretical aspects of the finite element matrices required in the aerodynamic instability analysis are also discussed. General organization of the computer program is explained, and instructions are then presented for the execution of the program

Voxel-wise comparisons of cellular microstructure and diffusion-MRI in mouse hippocampus using 3D Bridging of Optically-clear histology with Neuroimaging Data (3D-BOND)

A key challenge in medical imaging is determining a precise correspondence between image properties and tissue microstructure. This comparison is hindered by disparate scales and resolutions between medical imaging and histology. We present a new technique, 3D Bridging of Optically-clear histology with Neuroimaging Data (3D-BOND), for registering medical images with 3D histology to overcome these limitations. Ex vivo 120 × 120 × 200 μm resolution diffusion-MRI (dMRI) data was acquired at 7 T from adult C57Bl/6 mouse hippocampus. Tissue was then optically cleared using CLARITY and stained with cellular markers and confocal microscopy used to produce high-resolution images of the 3D-tissue microstructure. For each sample, a dense array of hippocampal landmarks was used to drive registration between upsampled dMRI data and the corresponding confocal images. The cell population in each MRI voxel was determined within hippocampal subregions and compared to MRI-derived metrics. 3D-BOND provided robust voxel-wise, cellular correlates of dMRI data. CA1 pyramidal and dentate gyrus granular layers had significantly different mean diffusivity (p > 0.001), which was related to microstructural features. Overall, mean and radial diffusivity correlated with cell and axon density and fractional anisotropy with astrocyte density, while apparent fibre density correlated negatively with axon density. Astrocytes, axons and blood vessels correlated to tensor orientation