Friction at Atomic-Scale Surface Steps: Experiment and Theory

Experiments performed by friction force microscopy at atomic-scale surface steps on graphite, MoS$_2$, and NaCl in ambient conditions are presented. Both step-down and step-up scans exhibit higher frictional forces at the edge, but distinguish in their load dependence: While the additional frictional force due to the step edge increases linearly with load if the tip has to jump a step up, it remains constant for downward jumps. This phenomena represents a universal effect that can be explained in terms of a modified Prandtl-Tomlinson model featuring a Schoebel-Ehrlich barrier at steps

Firm productivity in the Western Balkans: the impact of European Union membership and access to finance.

This study examines the productivity performance of Balkan firms within and outside the European Union (EU), including the influence of loans. A multiple treatment model is used to compare the effects on productivity of membership and loans both separately and collectively, which in the case of loans allows a separate analysis of their influence on firms in non-member states. The use of conditional quantile regressions measures the effect on productivity of membership and loans separately as treatment variables. This provides an analysis of where the treatment influence is greatest across the distribution curve and identifies the significance of selected control variables on the outcome. In the full sample, the findings indicate that EU membership and loans have a positive effect on productivity, with membership being more important than loans. Outside the EU, firms in receipt of loans are more productive than those without. However, the significance of both membership and loans is restricted to the lower end of the productivity distribution curve. The manufacturing sample shows that EU membership has a significant positive effect across 70% of the deciles measured, whilst the influence of loans is restricted to the lower deciles, with rental capital (leasing) also positively significant in the lower four deciles. In the services sector, however, membership is significant up to 90% of the distribution, with loans at 60%

Advanced atomic force microscopy techniques

Cataloged from PDF version of article.Although its conceptual approach is as simple as the technique used in record players already introduced in the 19th century, the invention of the atomic force microscope (AFM) in 1986 by Binnig, Quate, and Gerber was a milestone for nanotechnology. The scanning tunneling microscope (STM), introduced some years earlier, had already achieved atomic resolution, but is limited to conductive surfaces. Since its operational principle is based on the detection of the forces acting between tip and sample, this restriction does not exist for the AFM. Consequently, atomic force microscopy quickly became the standard tool for nanometer-scale imaging of all types of surfaces in all environments. True atomic resolution was first achieved in the 1990s. The most convincing results, however, were restricted to the so-called noncontact mode in vacuum for a long time, but recent technical developments overcame this limitation, and atomic-resolution imaging is now also a standard in liquids. Beyond pushing the resolution limit to the picometer range, the invention of the AFM triggered the development of a growing number of new scanning probe methods and approaches, ranging from an expansion of the properties that can be mapped to the active manipulation of surfaces and small particles. Practically every month, reports on the growing capabilities of AFMs appear. Nearly every physical effect that influences the tip–sample interaction has been used to improve existing modes and to develop new ones. For example, many recently presented techniques include the excitation of higher cantilever oscillation modes; it is amazing in how many ways the shaking of a simple cantilever can improve our knowledge about the tip–sample interaction. Another direction is high-speed atomic force microscopy, which is one of the eminent challenges that need to be solved in order to allow the in situ observation of biological processes. Data acquisition times have already reached the millisecond range, enabling the visualization of the dynamic behavior of biological molecules and cells. Other recent accomplishments include imaging of organic molecules with unprecedented resolution, full three-dimensional mapping of surface force fields, and the imaging and discrimination of individual chemical bonds. The development of advanced techniques is the focus of this Thematic Series, following the Thematic Series “Scanning probe microscopy and related techniques” edited by Ernst Meyer and the Thematic Series “Noncontact atomic force microscopy” edited by Udo Schwarz. The articles that are part of the series demonstrate that, despite its 25 years of history, the AFM is still far from reaching its limits, and today’s developments are far-reaching. As the number of research groups utilizing advanced atomic force microscopy techniques increases with each passing year, the technical improvements, data-acquisition approaches, analysis procedures, user friendliness, and application areas of the technique further diversify. With this Thematic Series, it is our intention to stimulate these improvements. We thank all authors for contributing their excellent work to this series. Furthermore, we acknowledge all referees for their promptly provided reports keeping the publication times short and attractive for contributors. Finally, we are grateful to the open access policy of the Beilstein Journal of Nanotechnology providing the ground for unrestricted discussions on advanced atomic force microscopy techniques. Thilo Glatzel, Hendrik Hölscher, Thomas Schimmel, Mehmet Z. Baykara, Udo D. Schwarz and Ricardo Garcia December 201

Characterization and Process Development for the MEBES I Electron Beam Lithography System

Characterization of a MEBES I electron beam lithography tool was done to investigate electron bear writing errors induced by electrical and mechanical interactions of the system. Process development of SAL6O3 a negatively working chemically amplified resist, which is required to provide a high sensitivity repeatable resist film, was also done

Nectar formation and floral nectary anatomy of Anigozanthos flavidus: a combined magnetic resonance imaging and spectroscopy study

Metabolic processes underlying the formation of floral nectar carbohydrates, especially the generation of the proportions of fructose, glucose, and sucrose, are important for understanding ecological plant–pollinator interactions. The ratio of sucrose-derived hexoses, fructose and glucose, in the floral nectar of Anigozanthos flavidus (Haemodoraceae) was observed to be different from 1:1, which cannot be explained by the simple action of invertases. Various NMR techniques were used to investigate how such an unbalanced ratio of the two nectar hexoses can be formed. High-resolution 13C NMR spectroscopy in solution was used to determine the proportion of carbohydrates in vascular bundles of excised inflorescences fed with 13C-labelled carbohydrates. These experiments verified that feeding did not affect the metabolic processes involved in nectar formation. In vivo magnetic resonance imaging (e.g. cyclic J cross-polarization) was used to detect carbohydrates in vascular bundles and 1H spin echo imaging non-invasively displayed the architecture of tepal nectaries and showed how they are connected to the vascular bundles. A model of the carbohydrate metabolism involved in forming A. flavidus floral nectar was established. Sucrose from the vascular bundles is not directly secreted into the lumen of the nectary but, either before or after invertase-catalysed hydrolyses, taken up by nectary cells and cycled at least partly through glycolysis, gluconeogenesis, and the pentose phosphate pathway. Secretion of the two hexoses in the cytosolic proportion could elegantly explain the observed fructose:glucose ratio of the nectar

Inclusive V0V^0 Production Cross Sections from 920 GeV Fixed Target Proton-Nucleus Collisions

Inclusive differential cross sections $d\sigma_{pA}/dx_F$ and $d\sigma_{pA}/dp_t^2$ for the production of \kzeros, \lambdazero, and \antilambda particles are measured at HERA in proton-induced reactions on C, Al, Ti, and W targets. The incident beam energy is 920 GeV, corresponding to $\sqrt {s} = 41.6$ GeV in the proton-nucleon system. The ratios of differential cross sections \rklpa and \rllpa are measured to be $6.2\pm 0.5$ and $0.66\pm 0.07$, respectively, for \xf $\approx-0.06$. No significant dependence upon the target material is observed. Within errors, the slopes of the transverse momentum distributions $d\sigma_{pA}/dp_t^2$ also show no significant dependence upon the target material. The dependence of the extrapolated total cross sections $\sigma_{pA}$ on the atomic mass $A$ of the target material is discussed, and the deduced cross sections per nucleon $\sigma_{pN}$ are compared with results obtained at other energies.Comment: 17 pages, 7 figures, 5 table

Inclusive jet cross section in pˉp{\bar p p} collisions at s=1.8\sqrt{s}=1.8 TeV

The inclusive jet differential cross section has been measured for jet transverse energies, $E_T$, from 15 to 440 GeV, in the pseudorapidity region 0.1$\leq | \eta| \leq$0.7. The results are based on 19.5 pb$^{-1}$ of data collected by the CDF collaboration at the Fermilab Tevatron collider. The data are compared with QCD predictions for various sets of parton distribution functions. The cross section for jets with $E_T>200$ GeV is significantly higher than current predictions based on O($\alpha_s^3$) perturbative QCD calculations. Various possible explanations for the high-$E_T$ excess are discussed.Comment: 8 pages with 2 eps uu-encoded figures Submitted to Physical Review Letter

Imaging of acute appendicitis in children: EU versus US ... or US versus CT? A European perspective

There is substantial evidence that imaging may reduce the negative appendectomy rate, also in children. However, controversy exists about the preferred method: US or CT, and the choice appears to be determined by the side of the Atlantic Ocean. This review brings forth several arguments in favour of U

Measurement of Dijet Angular Distributions at CDF

We have used 106 pb^-1 of data collected in proton-antiproton collisions at sqrt(s)=1.8 TeV by the Collider Detector at Fermilab to measure jet angular distributions in events with two jets in the final state. The angular distributions agree with next to leading order (NLO) predictions of Quantum Chromodynamics (QCD) in all dijet invariant mass regions. The data exclude at 95% confidence level (CL) a model of quark substructure in which only up and down quarks are composite and the contact interaction scale is Lambda_ud(+) < 1.6 TeV or Lambda_ud(-) < 1.4 TeV. For a model in which all quarks are composite the excluded regions are Lambda(+) < 1.8 TeV and Lambda(-) < 1. 6 TeV.Comment: 16 pages, 2 figures, 2 tables, LaTex, using epsf.sty. Submitted to Physical Review Letters on September 17, 1996. Postscript file of full paper available at http://www-cdf.fnal.gov/physics/pub96/cdf3773_dijet_angle_prl.p