Strategic planning optimisation of "Napoli Est" water distribution system

The District Meter Areas (DMA) design is an innovative methodology of water networks management, based on the pressure patterns control and on the water flows monitoring, in order to reduce water losses and to optimize the water systems management. A District Meter Area is an area supplied from few water inputs, into which discharges can be easily measured to determine leaks. So, the DMA design represents an alternative to the traditional approach based on heavy looped distribution network. In the present paper the DMA design of the “Napoli Est” water distribution system (approximately 65.000÷70.000 customers), performed with the support of the Water Agency ARIN S.p.A., is discussed. After analysis of authorized consumption, by means of a monitoring campaign of water flows over the area, the system water balance was performed, showing significant water losses, as a consequence of high pressure patterns. This situation was confirmed by the high number of maintenance operations performed in the area during the year 2005. In order to characterize the piezometric heads on the network, ARIN S.p.A. supplied to the installation of six pressure transducers in the most vulnerable areas. The water level in the supply reservoir was also measured in order to estimate its influence on the network pressure heads. Hydraulic simulations were carried out with the EPANET software version 2.0 applied to a network layout resulted from the system “skeletonization”, achieved by eliminating out of order pipes, integrating pipelines of same diameter and roughness, replacing dead-end branches and small networks supplied by a single junction with an equivalent discharge. After the skeletonizated network was calibrated, several hypothesis of designing and implementing DMA to reduce physical losses were performed, providing adequate operating pressure of the system. Many numerical simulations were performed to guarantee adequate head pressure especially for peak hours demand, break of transmission mains and fire hydrant service. A chlorine residuals analysis was also effected, by simulating the transport and decay of chlorine through the network. District Meter Areas, therefore, were designed, and the corresponding hydraulic and water quality investigations and simulations were carried out. Six District Meter Areas were planned, assembling 14 intercepting valves and 9 pressure reducing valves to prevent the downstream pressure head from exceeding the set value, achieving a remarkable water saving, approximately equal to 34% of the physical losses, corresponding to 16% of system input volume

On vv--domains and star operations

Let $\ast$ be a star operation on an integral domain $D$. Let \f(D) be the set of all nonzero finitely generated fractional ideals of $D$. Call $D$ a $\ast$--Pr\"ufer (respectively, $(\ast, v)$--Pr\"ufer) domain if $(FF^{-1})^{\ast}=D$ (respectively, $(F^vF^{-1})^{\ast}=D$) for all F\in \f(D). We establish that $\ast$--Pr\"ufer domains (and $(\ast, v)$--Pr\"ufer domains) for various star operations $\ast$ span a major portion of the known generalizations of Pr\"{u}fer domains inside the class of $v$--domains. We also use Theorem 6.6 of the Larsen and McCarthy book [Multiplicative Theory of Ideals, Academic Press, New York--London, 1971], which gives several equivalent conditions for an integral domain to be a Pr\"ufer domain, as a model, and we show which statements of that theorem on Pr\"ufer domains can be generalized in a natural way and proved for $\ast$--Pr\"ufer domains, and which cannot be. We also show that in a $\ast$--Pr\"ufer domain, each pair of $\ast$-invertible $\ast$-ideals admits a GCD in the set of $\ast$-invertible $\ast$-ideals, obtaining a remarkable generalization of a property holding for the "classical" class of Pr\"ufer $v$--multiplication domains. We also link $D$ being $\ast$--Pr\"ufer (or $(\ast, v)$--Pr\"ufer) with the group Inv$^{\ast}(D)$ of $\ast$-invertible $\ast$-ideals (under $\ast$-multiplication) being lattice-ordered

Methodology for evaluating the safety level of current accepted design solutions for limiting fire spread between buildings

External fire spread between buildings is internationally considered as a major concern for buildings in dense urban environments. While design guidelines differ between countries, the fundamental methods currently used for limiting the risk of fire spread between buildings are generally limited to specifying the minimum required separation distance for a given unprotected façade area, or conversely, limiting the maximum allowable unprotected façade area for a given separation distance. The safety level associated with the current design guidelines is however unknown, making the implementation of innovative, safer and more cost-effective design solutions difficult. In order to assess the safety target implicitly incorporated in currently accepted design solutions, a methodology is developed for evaluating the annual probability of reaching unacceptable radiation intensities at the opposite façade. As a case study, the methodology is applied to a design which is in agreement with the current UK requirements specified in BR 187. This case study exposes inconsistencies in the current design guidelines, indicating the need for developing explicit safety targets

Nuclear electric propulsion development and qualification facilities

This paper summarizes the findings of a Tri-Agency panel consisting of members from the National Aeronautics and Space Administration (NASA), U.S. Department of Energy (DOE), and U.S. Department of Defense (DOD) that were charged with reviewing the status and availability of facilities to test components and subsystems for megawatt-class nuclear electric propulsion (NEP) systems. The facilities required to support development of NEP are available in NASA centers, DOE laboratories, and industry. However, several key facilities require significant and near-term modification in order to perform the testing required to meet a 2014 launch date. For the higher powered Mars cargo and piloted missions, the priority established for facility preparation is: (1) a thruster developmental testing facility, (2) a thruster lifetime testing facility, (3) a dynamic energy conversion development and demonstration facility, and (4) an advanced reactor testing facility (if required to demonstrate an advanced multiwatt power system). Facilities to support development of the power conditioning and heat rejection subsystems are available in industry, federal laboratories, and universities. In addition to the development facilities, a new preflight qualifications and acceptance testing facility will be required to support the deployment of NEP systems for precursor, cargo, or piloted Mars missions. Because the deployment strategy for NEP involves early demonstration missions, the demonstration of the SP-100 power system is needed by the early 2000's

Observing the very low-surface brightness dwarfs in a deep field in the VIRGO cluster: constraints on Dark Matter scenarios

We report the discovery of 11 very faint (r< 23), low surface brightness ({\mu}_r< 27 mag/arcsec^2) dwarf galaxies in one deep field in the Virgo cluster, obtained by the prime focus cameras (LBC) at the Large Binocular Telescope (LBT). These extend our previous sample to reach a total number of 27 galaxies in a field of just of 0.17 deg^2 located at a median distance of 390 kpc from the cluster center. Their association with the Virgo cluster is supported by their separate position in the central surface brightness - total magnitude plane with respect to the background galaxies of similar total magnitude. For a significant fraction (26\%) of the sample the association to the cluster is confirmed by spectroscopic follow-up. We show that the mere abundance of satellite galaxies corresponding to our observed number in the target field provides extremely tight constraints on Dark Matter models with suppressed power spectrum compared to the Cold Dark Matter case, independently of the galaxy luminosity distribution. In particular, requiring the observed number of satellite galaxies not to exceed the predicted abundance of Dark Matter sub-halos yields a limit m_X >3 keV at 1-{\sigma} and m_X > 2.3 keV at 2-{\sigma} confidence level for the mass of thermal Warm Dark Matter particles. Such a limit is competitive with other limits set by the abundance of ultra-faint satellite galaxies in the Milky Way, is completely independent of baryon physics involved in galaxy formation, and has the potentiality for appreciable improvements with next observations. We extend our analysis to Dark Matter models based on sterile neutrinos, showing that our observations set tight constraints on the combination of sterile neutrino mass m_{\nu} and mixing parameter sin^2(2{\theta}). We discuss the robustness of our results with respect to systematics.Comment: Accepted for publication in Astronomy & Astrophysic

High-Resolution Spectroscopy from 3050 to 10000 A of the HDF-S QSO J2233-606 with UVES at the ESO VLT

We report on high-resolution observations ($\Re \simeq 45000$) of the Hubble Deep Field South QSO J2233-606 obtained with the VLT UV-Visual Echelle Spectrograph (UVES). We present spectral data for the wavelength region $3050 < \lambda < 10000$ \AA. The $S/N$ ratio of the final spectrum is about 50 per resolution element at 4000 \AA, 90 at 5000 \AA, 80 at 6000 \AA, 40 at 8000 \AA. Redshifts, column densities and Doppler widths of the absorption features have been determined with Voigt-profile fitting. A total of 621 lines have been measured. In particular 270 Ly-alpha lines, 41 Ly-beta and 24 systems containing metal lines have been identified. Together with other data in the literature, the present spectrum confirms that the evolution of the number density of Ly-alpha lines with $\log N($\huno$) > 14$ has an upturn at $z \sim 1.4-1.6$.Comment: 34 pages Latex, with 3 PostScript figures. Astronomical Journal, in press. A few revised upper limit