Physical and biological controls on fine sediment transport and storage in rivers

Excess fine sediment, comprising particles <2 mm in diameter, is a major cause of ecological degradation in rivers. The erosion of fine sediment from terrestrial or aquatic sources, its delivery to the river, and its storage and transport in the fluvial environment are controlled by a complex interplay of physical, biological and anthropogenic factors. Whilst the physical controls exerted on fine sediment dynamics are relatively well-documented, the role of biological processes and their interactions with hydraulic and physico-chemical phenomena has been largely overlooked. The activities of biota, from primary producers to predators, exert strong controls on fine sediment deposition, infiltration and resuspension. For example, extracellular polymeric substances (EPS) associated with biofilms increase deposition and decrease resuspension. In lower energy rivers, aquatic macrophyte growth and senescence are intimately linked to sediment retention and loss, whereas riparian trees are dominant ecosystem engineers in high energy systems. Fish and invertebrates also have profound effects on fine sediment dynamics through activities that drive both particle deposition and erosion depending on species composition and abiotic conditions. The functional traits of species present will determine not only these biotic effects but also the responses of river ecosystems to excess fine sediment. We discuss which traits are involved and put them into context with spatial processes that occur throughout the river network. Whilst strides towards better understanding of the impacts of excess fine sediment have been made, further progress to identify the most effective management approaches is urgently required through close communication between authorities and scientists

Human cystic echinococcosis: evaluation of post-treatment serologic follow-up by IgG subclass antibody detection.

Assessment of post-treatment disease activity among patients with cystic echinococcosis (CE) is insensitive using detection of CE-specific total IgG antibody. This study investigated whether serum concentrations of CE-specific IgG subclasses 1-4 correlate better with disease activity than total IgG. We studied a cohort of patients (n = 28) with symptomatic CE treated with anthelminthic drugs and surgery and who were followed up clinically and radiologically for a mean of 5.6 years (range = 3-12 years). Serial archived sera collected during follow-up were retrospectively analyzed by enzyme-linked immunosorbent assays using crude horse hydatid cyst fluid as antigen. Changes in concentrations of antibodies were correlated with clinical and radiologic outcome. At diagnosis, concentrations of CE-specific total IgG, IgG1, and IgG2 antibodies were significantly elevated in a greater proportion of patients compared with IgG3 and IgG4 antibodies. During post-treatment follow up, the IgG2 antibody response provided the best correlate of disease activity

An inquiry-based learning approach to teaching information retrieval

The study of information retrieval (IR) has increased in interest and importance with the explosive growth of online information in recent years. Learning about IR within formal courses of study enables users of search engines to use them more knowledgeably and effectively, while providing the starting point for the explorations of new researchers into novel search technologies. Although IR can be taught in a traditional manner of formal classroom instruction with students being led through the details of the subject and expected to reproduce this in assessment, the nature of IR as a topic makes it an ideal subject for inquiry-based learning approaches to teaching. In an inquiry-based learning approach students are introduced to the principles of a subject and then encouraged to develop their understanding by solving structured or open problems. Working through solutions in subsequent class discussions enables students to appreciate the availability of alternative solutions as proposed by their classmates. Following this approach students not only learn the details of IR techniques, but significantly, naturally learn to apply them in solution of problems. In doing this they not only gain an appreciation of alternative solutions to a problem, but also how to assess their relative strengths and weaknesses. Developing confidence and skills in problem solving enables student assessment to be structured around solution of problems. Thus students can be assessed on the basis of their understanding and ability to apply techniques, rather simply their skill at reciting facts. This has the additional benefit of encouraging general problem solving skills which can be of benefit in other subjects. This approach to teaching IR was successfully implemented in an undergraduate module where students were assessed in a written examination exploring their knowledge and understanding of the principles of IR and their ability to apply them to solving problems, and a written assignment based on developing an individual research proposal

Electrospun pH-sensitive core-shell polymer nanocomposites fabricated using a tri-axial process

A modified tri-axial electrospinning process was developed for the generation of a new type of pH-sensitive polymer/lipid nanocomposite. The systems produced are able to promote both dissolution and permeation of a model poorly water-soluble drug. First, we show that it is possible to run a tri-axial procress with only one of the three fluids being electrospinnable. Using an electrospinnable middle fluid of Eudragit S100 (ES100) with pure ethanol as the outer solvent and an unspinnable lecithin-diclofenac sodium (PL-DS) core solution, nanofibers with linear morphology and clear core/shell structures can be fabricated continuously and smoothly. X-ray diffraction proved that these nanofibers are structural nanocomposites with the drug present in an amorphous state. In vitro dissolution tests demonstrated that the formulations could preclude release in acidic conditions, and that the drug was released from the fibers in two successive steps at neutral pH. The first step is the dissolution of the shell ES100 and the conversion of the core PL-DS into sub-micron sized particles. This frees some DS into solution, and later the remaining DS is gradually released from the PL-DS particles through diffusion. Ex vivo permeation results showed that the composite nanofibers give a more than two-fold uplift in the amount of DS passing through the colonic membrane as compared to pure DS; 74% of the transmitted drug was in the form of PL-DS particles. The new tri-axial electrospinning process developed in this work provides a platform to fabricate structural nanomaterials, and the core-shell polymer-PL nanocomposites we have produced have significant potential applications for oral colon-targeted drug delivery. STATEMENT OF SIGNIFICANCE: A modified tri-axial electrospinning is demonstrated to create a new type of core-shell pH-sensitive polymer/lipid nanocomposites, in which an electrospinnable middle fluid is exploited to support the un-spinnable outer and inner fluids. The structural nanocomposites are able to provide a colon-targeted sustained release and an enhanced permeation performance of diclofenac sodium. The developed tri-axial process can provide a platform for fabricating new structural nanomaterials with high quality. The strategy of a combined usage of polymeric excipients and phosphilipid in a core-shell format should provide new possibilities of developing novel drug delivery systems for efficacious oral administration of poorly-water soluble drugs

Cubic γ-phase U–Mo alloys synthesized by splat-cooling

U–Mo alloys are the most promising materials fulfilling the requirements of using low enriched uranium (LEU) fuel in research reactors. From a fundamental standpoint, it is of interest to determine the basic thermodynamic properties of the cubic γ-phase U–Mo alloys. We focus our attention on the use of Mo doping together with ultrafast cooling (with high cooling rates ≥106 K s−1), which helps to maintain the cubic γ-phase in U–Mo system to low temperatures and on determination of the low-temperature properties of these γ-U alloys. Using a splat cooling method it has been possible to maintain some fraction of the high-temperature γ-phase at room temperature in pure uranium. U-13 at.% Mo splat clearly exhibits the pure γ-phase structure. All the splats become superconducting with Tc in the range from 1.24 K (pure U splat) to 2.11 K (U-15 at.% Mo). The γ-phase in U–Mo alloys undergoes eutectoid decomposition to form equilibrium phases of orthorhombic α-uranium and tetragonal γ'-phase upon annealing at 500 °C, while annealing at 800 °C has stabilized the initial γ phase. The α-U easily absorbs a large amount of hydrogen (UH3 hydride), while the cubic bcc phase does not absorb any detectable amount of hydrogen at pressures below 1 bar and at room temperature. At 80 bar, the U-15 at.% Mo splat becomes powder consisting of elongated particles of 1–2 mm, revealing amorphous state

Atomic-scale Studies of Uranium Oxidation and Corrosion by Water Vapour

Understanding the corrosion of uranium is important for its safe, long-term storage. Uranium metal corrodes rapidly in air, but the exact mechanism remains subject to debate. Atom Probe Tomography was used to investigate the surface microstructure of metallic depleted uranium specimens following polishing and exposure to moist air. A complex, corrugated metal-oxide interface was observed, with approximately 60 at.% oxygen content within the oxide. Interestingly, a very thin (~5 nm) interfacial layer of uranium hydride was observed at the oxide-metal interface. Exposure to deuterated water vapour produced an equivalent deuteride signal at the metal-oxide interface, confirming the hydride as originating via the water vapour oxidation mechanism. Hydroxide ions were detected uniformly throughout the oxide, yet showed reduced prominence at the metal interface. These results support a proposed mechanism for the oxidation of uranium in water vapour environments where the transport of hydroxyl species and the formation of hydride are key to understanding the observed behaviour