730 research outputs found
Influence de la mortalité des cacaoyers sur la stabilité de la production dans une plantation industrielle
Effect of Cocoa Tree Mortality on Production Stability in a Private Estate. Yields in a 1,674 ha cocoa estate were analysed in Indonesia. The plantation, which was set up between 1981 and 1990 at Ransiki (Papua province), benefited from suitable soil and climatic conditions: good rainfall distribution and rich soils. The planting material comprised hybrids of various origins, Amelonados and local selections. Density measurements inside the plantation revealed a gradual reduction in the number of cocoa trees, from 1,250 at the outset to 835 trees/ha after 21 years. At the same time, overall yields for the same period remained stable. Cocoa tree mortality, which was responsible for the gradual reduction in density, did not affect production; neither did it alter the uniformity of the plant cover in the plots. This situation reflected an increase in tree productivity. The conditions for stabilized cocoa yields appeared to be linked not only to suitable edapho-climatic conditions and limited parasite pressure, but also to the ability of cocoa trees to increase their yields in conditions of decreasing stand due to the natural thining of the original plant population
Fluctuations in Chemical Gelation
We study a chemical gelation model in two dimensions which includes both
monomer aggregations and bond fluctuations. Our numerical simulation shows that
a sol-gel transition occurs when an initial monomer concentration is above a
critical concentration. Fractal aggregates grow until the sol-gel transition
occurs. After the gelation, however, bond fluctuations break the fractal
structure and a novel inhomogeneous gel fibre network appears instead. A pore
size distribution of the inhomogeneous structure shows the existence of
hierarchical structures in the gel phase. It is also found that slow dynamics
appear near the critical concentration.Comment: 6 pages, 10figure
Model-based engineering of widgets, user applications and servers compliant with ARINC 661 specification
International audienceThe purpose of ARINC 661 specification [1] is to define interfaces to a Cockpit Display System (CDS) used in any types of aircraft installations. ARINC 661 provides precise information for communication protocol between application (called User Applications) and user interface components (called widgets) as well as precise information about the widgets themselves. However, in ARINC 661, no information is given about the behaviour of these widgets and about the behaviour of an application made up of a set of such widgets. This paper presents the results of the application of a formal description technique to the various elements of ARINC 661 specification within an industrial project. This formal description technique called Interactive Cooperative Objects defines in a precise and non-ambiguous way all the elements of ARINC 661 specification. The application of the formal description techniques is shown on an interactive application called MPIA (Multi Purpose Interactive Application). Within this application, we present how ICO are used for describing interactive widgets, User Applications and User Interface servers (in charge of interaction techniques). The emphasis is put on the model-based management of the feel of the applications allowing rapid prototyping of the external presentation and the interaction techniques. Lastly, we present the CASE (Computer Aided Software Engineering) tool supporting the formal description technique and its new extensions in order to deal with large scale applications as the ones targeted at by ARINC 661 specification
Perception of Nuclear Energy and Coal in France and the Netherlands
This study focuses on the perception of large scale application of nuclear energy and coal in the Netherlands and France. The application of these energy-sources and the risks and benefits are judged differently by various group in society. In Europe, France has the highest density of nuclear power plants and the Netherlands has one of the lowest. In both countries scientists and social scientists completed a questionnaire assessing the perception of the large scale application of both energy sources. Furthermore, a number of variables relating to the socio cultural and political circumstances were measured. The results indicate that the French had a higher risk perception and a more negative attitude toward nuclear power than the Dutch. But they also assess the benefits of the use of nuclear power to be higher. Explanations for these differences are discussed
ISML: an interface specification meta-language
In this paper we present an abstract metaphor model situated within a model-based user interface framework. The inclusion of metaphors in graphical user interfaces is a well established, but mostly craft-based strategy to design. A substantial body of notations and tools can be found within the model-based user interface design literature, however an explicit treatment of metaphor and its mappings to other design views has yet to be addressed. We introduce the Interface Specification Meta-Language (ISML) framework and demonstrate its use in comparing the semantic and syntactic features of an interactive system. Challenges facing this research are outlined and further work proposed
Dimensional changes of CAD/CAM polymer crowns after water aging - An in vitro experiment
Computer-Aided Design/Computer-Aided Manufacturing (CAD/CAM) polymers can potentially replace traditional materials used for manufacturing indirect restorations. In 2012, Lava Ultimate (LU) was introduced as a highly suitable material for implant-supported single crowns. Three years after its introduction, the manufacturer issued a change in indication for the material, implying that they no longer considered the material to be suitable for crown indications due to debonding issues. A clinical trial with implant-borne Lava Ultimate crowns bonded to zirconia abutments revealed that 80 percent of the LU crowns showed debonding from the abutment within one year, whereas no debonding occurred when an alternative full-ceramic restoration material was used. These results suggest that the material itself had been the cause of the debonding. However, the exact reason for the debonding remained unclear. Water uptake in resin methacrylates like LU is known to cause dimensional changes resulting in mechanical stress on the RelyX Ultimate (RU) cement. The purpose of this study is to quantify the dimensional changes in LU caused by water uptake and relate these dimensional changes to the failure of the RU cement. Twenty-five identical LU-crowns were divided into three groups. 10 LU-crowns with abutment and 10 crowns without abutments were stored in water for 23 days and were only removed for measurement. Five crowns served as a control to calibrate the measurements. The internal diameter was measured eight times with a TS 460 Heidenhain touch probe. For visualization purposes, one crown was also 3D scanned before and after water treatment. The results showed that after 23 days in water the mean increase in diameter for the groups with and without abutment was 36.6 μm (SD = 35,1) and 36.7 μm (SD = 26,5) respectively. Mixed effects modelling indicated no significant between-group differences at any time point. Exposure of LU to water results in dimensional changes causing mechanical stress on the crown-abutment complex. It can be estimated that RU cement fails after an expansion of more than 4 μm. Within the limitations of this in vitro study, it can be concluded that the dimensional changes induced by water uptake can cause debonding issues. As more CAD/CAM polymers for restorative purposes are expected to be developed, the results of this study should stimulate manufacturers to quantify their products' dimensional changes in a wet environment before market release
A new mechanism of SOX9 action to regulate PKC expression in the intestine epithelium
International audienceVariations of protein kinase C (PKC) expression greatly influence the proliferation-to-differentiation transition (PDT) of intestinal epithelial cells and might have an important impact on intestinal tumorigenesis. We demonstrate here that the expression of PKCalpha in proliferating intestinal epithelial cells is repressed both in vitro and in vivo by the SOX9 transcription factor. This repression does not require DNA binding of the SOX9 high-mobility group (HMG) domain but is mediated through a new mechanism of SOX9 action requiring the central and highly conserved region of SOXE members. Because SOX9 expression is itself upregulated by Wnt-APC signaling in intestinal epithelial cells, the present study points out this transcription factor as a molecular link between the Wnt-APC pathway and PKCalpha. These results provide a potential explanation for the decrease of PKCalpha expression in colorectal cancers with constitutive activation of the Wnt-APC pathway
Phase Diagram of the 1D Anderson Lattice
We map out the phase diagram of the one--dimensional Anderson lattice by
studying the ground state magnetization as a function of band--filling using
the density matrix renormalization group technique. For strong coupling, we
find that the quarter--filled system has an S=0 ground state with strong
antiferromagnetic correlations. As additional electrons are put in, we find
first a ferromagnetic phase, as reported by M\"{o}ller and W\"{o}lfle, and then
a phase in which the ground state has total spin . Within this
phase, we find RKKY oscillations in the spin--spin correlation functions.Comment: REVTEX manuscript with 5 Postcript figures included in uu file.
Submitted to Phys. Rev.
Soft and non-soft structural transitions in disordered nematic networks
Properties of disordered nematic elastomers and gels are theoretically
investigated with emphasis on the roles of non-local elastic interactions and
crosslinking conditions. Networks originally crosslinked in the isotropic phase
lose their long-range orientational order by the action of quenched random
stresses, which we incorporate into the affine-deformation model of nematic
rubber elasticity. We present a detailed picture of mechanical quasi-Goldstone
modes, which accounts for an almost completely soft polydomain-monodomain (P-M)
transition under strain as well as a ``four-leaf clover'' pattern in
depolarized light scattering intensity. Dynamical relaxation of the domain
structure is studied using a simple model. The peak wavenumber of the structure
factor obeys a power-law-type slow kinetics and goes to zero in true mechanical
equilibrium. The effect of quenched disorder on director fluctuation in the
monodomain state is analyzed. The random frozen contribution to the fluctuation
amplitude dominates the thermal one, at long wavelengths and near the P-M
transition threshold. We also study networks obtained by crosslinking
polydomain nematic polymer melts. The memory of initial director configuration
acts as correlated and strong quenched disorder, which renders the P-M
transition non-soft. The spatial distribution of the elastic free energy is
strongly dehomogenized by external strain, in contrast to the case of
isotropically crosslinked networks.Comment: 19 pages, 15 EPS figure
- …