A quantitative model of water radiolysis and chemical production rates near radionuclide-containing solids

We present a mathematical model that quantifies the rate of water radiolysis near radionuclide-containing solids. Our model incorporates the radioactivity of the solid along with the energies and attenuation properties for alpha (α), beta (β), and gamma (γ) radiation to calculate volume normalized dose rate profiles. In the model, these dose rate profiles are then used to calculate radiolytic hydrogen (H2) and hydrogen peroxide (H2O2) production rates as a function of distance from the solid–water interface. It expands on previous water radiolysis models by incorporating planar or cylindrical solid–water interfaces and by explicitly including γ radiation in dose rate calculations. To illustrate our model\u27s utility, we quantify radiolytic H2 and H2O2 production rates surrounding spent nuclear fuel under different conditions (at 20 years and 1000 years of storage, as well as before and after barrier failure). These examples demonstrate the extent to which α, β and γ radiation contributes to total absorbed dose rate and radiolytic production rates. The different cases also illustrate how H2 and H2O2 yields depend on initial composition, shielding and age of the solid. In this way, the examples demonstrate the importance of including all three types of radiation in a general model of total radiolytic production rates

Determination of in situ dissolved inorganic carbon concentration and alkalinity for marine sedimentary porewater

Dissolved inorganic carbon (DIC) concentration and total alkalinity in marine sediment vary with biological activity, mineral diagenesis and past bottom ocean water composition. Reliable interpretation of this data is often compromised due to precipitation of calcium carbonate (CaCO3) during sediment recovery, processing and sample storage. Here we present and test a method that corrects for this precipitation and consequently allows quantification of in situ carbonate system chemistry. Our method relies on the over-determination of the dissolved carbonate system by (i) measuring DIC, alkalinity and calcium, and (ii) explicitly assuming CaCO3 saturation in the sediment. We experimentally tested this method using data from Integrated Ocean Drilling Program (IODP) Site U1368 in the South Pacific Gyre. Our results show that we can accurately reproduce in situ aqueous carbonate system chemistry if DIC, alkalinity and calcium concentration are measured simultaneously. At Site U1368, the correction for sampling associated precipitation is equivalent to 4.5 and 8.9% of the measured DIC and alkalinity, respectively. The method is well suited for any sediment porewater that is saturated with respect to calcium carbonate; consequently, it is applicable for approximately 50% of the global oceanic seafloor

Methane-Oxidizing Seawater Microbial Communities from an Arctic Shelf

Marine microbial communities can consume dissolved methane before it can escape to the atmosphere and contribute to global warming. Seawater over the shallow Arctic shelf is characterized by excess methane compared to atmospheric equilibrium. This methane originates in sediment, permafrost, and hydrate. Particularly high concentrations are found beneath sea ice. We studied the structure and methane oxidation potential of the microbial communities from seawater collected close to Utqiagvik, Alaska, in April 2016. The in situ methane concentrations were 16.3 ± 7.2 nmol L−1 , approximately 4.8 times oversaturated relative to atmospheric equilibrium. The group of methaneoxidizing bacteria (MOB) in the natural seawater and incubated seawater was \u3e 97 % dominated by Methylococcales (γ -Proteobacteria). Incubations of seawater under a range of methane concentrations led to loss of diversity in the bacterial community. The abundance of MOB was low with maximal fractions of 2.5 % at 200 times elevated methane concentration, while sequence reads of non-MOB methylotrophs were 4 times more abundant than MOB in most incubations. The abundances of MOB as well as non-MOB methylotroph sequences correlated tightly with the rate constant (kox) for methane oxidation, indicating that non-MOB methylotrophs might be coupled to MOB and involved in community methane oxidation. In sea ice, where methane concentrations of 82 ± 35.8 nmol kg−1 were found, Methylobacterium (α-Proteobacteria) was the dominant MOB with a relative abundance of 80 %. Total MOB abundances were very low in sea ice, with maximal fractions found at the ice– snow interface (0.1 %), while non-MOB methylotrophs were present in abundances similar to natural seawater communities. The dissimilarities in MOB taxa, methane concentrations, and stable isotope ratios between the sea ice and water column point toward different methane dynamics in the two environments

Reconstruction of Pacific Ocean Bottom Water Salinity During the Last Glacial Maximum

Knowledge of salinity in the deep ocean is important for understanding past ocean circulation and climate. Based on sedimentary pore fluid chloride measurements of a single Pacific site, Adkins et al. (2002) suggested that, during the Last Glacial Maximum (LGM), the Pacific deep bottom water was saltier than expected based on lower sea level alone. Here we present high-resolution salinity profiles from five sites in the South, Equatorial, and North Pacific Ocean. Our study greatly constrains understanding of LGM salinity in the Pacific Ocean. Our results show that LGM chloride concentrations of deep Pacific bottom water were 4.09 ± 0.4% greater than today\u27s values. Pacific Ocean bottom water salinity was also indistinguishable from being homogeneous across the wide range of latitudes studied here. These LGM salinity reconstructions are on average slightly higher (~1.4 to 1% higher) than expected from sea level of the time, which is generally inferred to have been ~120 to ~135 m lower than today

Radiolytic Hydrogen Production in the Subseafloor Basaltic Aquifer

Hydrogen (H2) is produced in geological settings by dissociation of water due to radiation from radioactive decay of naturally occurring uranium (238U, 235U), thorium (232Th) and potassium (40K). To quantify the potential significance of radiolytic H2 as an electron donor for microbes within the South Pacific subseafloor basaltic aquifer, we use radionuclide concentrations of 43 basalt samples from IODP Expedition 329 to calculate radiolytic H2 production rates in basement fractures. The samples are from three sites with very different basement ages and a wide range of alteration types. U, Th, and K concentrations vary by up to an order of magnitude from sample to sample at each site. Comparison of our samples to each other and to the results of previous studies of unaltered East Pacific Rise basalt suggests that significant variations in radionuclide concentrations are due to differences in initial (unaltered basalt) concentrations (which can vary between eruptive events) and post-emplacement alteration. However, there is no clear relationship between alteration type and calculated radiolytic yields. Local maxima in U, Th, and K produce hotspots of H2production, causing calculated radiolytic rates to differ by up to a factor of 80 from sample to sample. Fracture width also greatly influences H2 production, where microfractures are hotspots for radiolytic H2 production. For example, H2 production rates normalized to water volume are 190 times higher in 1 μm wide fractures than in fractures that are 10 cm wide. To assess the importance of water radiolysis for microbial communities in subseafloor basaltic aquifers, we compare electron transfer rates from radiolysis to rates from iron oxidation in subseafloor basalt. Radiolysis appears likely to be a more important electron donor source than iron oxidation in old (\u3e10 Ma) basement basalt. Radiolytic H2 production in the volume of water adjacent to a square cm of the most radioactive SPG basalt may support as many as 1500 cells

Assessment and Use of NGR Instrumentation on the JOIDES Resolution to Quantify U, Th, and K Concentrations in Marine Sediment

No abstract available. doi:10.2204/iodp.sd.15.05.2013</a

Hydrogen Utilization Potential in Subsurface Sediments

Subsurface microbial communities undertake many terminal electron-accepting processes, often simultaneously. Using a tritium-based assay, we measured the potential hydrogen oxidation catalyzed by hydrogenase enzymes in several subsurface sedimentary environments (Lake Van, Barents Sea, Equatorial Pacific, and Gulf of Mexico) with different predominant electron-acceptors. Hydrogenases constitute a diverse family of enzymes expressed by microorganisms that utilize molecular hydrogen as a metabolic substrate, product, or intermediate. The assay reveals the potential for utilizing molecular hydrogen and allows qualitative detection of microbial activity irrespective of the predominant electron-accepting process. Because the method only requires samples frozen immediately after recovery, the assay can be used for identifying microbial activity in subsurface ecosystems without the need to preserve live material. We measured potential hydrogen oxidation rates in all samples from multiple depths at several sites that collectively span a wide range of environmental conditions and biogeochemical zones. Potential activity normalized to total cell abundance ranges over five orders of magnitude and varies, dependent upon the predominant terminal electron acceptor. Lowest per-cell potential rates characterize the zone of nitrate reduction and highest per-cell potential rates occur in the methanogenic zone. Possible reasons for this relationship to predominant electron acceptor include (i) increasing importance of fermentation in successively deeper biogeochemical zones and (ii) adaptation of H2ases to successively higher concentrations of H2 in successively deeper zones

Exploring New Drilling Prospects in the Southwest Pacific

A major International Ocean Discovery Program (IODP) workshop covering scientific ocean drilling in the southwest Pacific Ocean was held in Sydney, Australia, in late 2012. The workshop covered all fields of geoscience, and drilling targets in the area from the Equator to Antarctica. High-quality contributions and a positive and cooperative atmosphere ensured its success. The four science themes of the new IODP science plan were addressed. An additional resource-oriented theme considered possible co-investment opportunities involving IODP vessels. As a result of the workshop, existing proposals were revised and new ones written for the April 2013 deadline. Many of the proposals are broad and multidisciplinary in nature, hence broadening the scientific knowledge that can be produced by using the IODP infrastructure. This report briefly outlines the workshop and the related drilling plans