A population study of type II bursts in the Rapid Burster

Type II bursts are thought to arise from instabilities in the accretion flow onto a neutron star in an X-ray binary. Despite having been known for almost 40 years, no model can yet satisfactorily account for all their properties. To shed light on the nature of this phenomenon and provide a reference for future theoretical work, we study the entire sample of Rossi X-ray Timing Explorer data of type II bursts from the Rapid Burster (MXB 1730-335). We find that type II bursts are Eddington-limited in flux, that a larger amount of energy goes in the bursts than in the persistent emission, that type II bursts can be as short as 0.130 s, and that the distribution of recurrence times drops abruptly below 15-18 s. We highlight the complicated feedback between type II bursts and the NS surface thermonuclear explosions known as type I bursts, and between type II bursts and the persistent emission. We review a number of models for type II bursts. While no model can reproduce all the observed burst properties and explain the source uniqueness, models involving a gating role for the magnetic field come closest to matching the properties of our sample. The uniqueness of the source may be explained by a special combination of magnetic field strength, stellar spin period and alignment between the magnetic field and the spin axis.Comment: Accepted 2015 February 12. Received 2015 February 10; in original form 2014 December 1

Role of the flat-designed surface in improving the cyclic fatigue resistance of endodontic NiTi rotary instruments

The aim of this study was to investigate the role of the flat-designed surface in improving the resistance to cyclic fatigue by comparing heat-treated F-One (Fanta Dental, Shanghai, China) nickel-titanium (NiTi) rotary instruments and similar prototypes, differing only by the absence of the flat side. The null hypothesis was that there were no differences between the two tested instruments in terms of cyclic fatigue lifespan. A total of 40 new NiTi instruments (20 F-One and 20 prototypes) were tested in the present study. The instruments were rotated with the same speed (500 rpm) and torque (2 N) using an endodontic motor (Elements Motor, Kerr, Orange, CA, USA) in the same stainless steel, artificial canal (90° angle of curvature and 5 mm radius). A Wilcoxon-Mann-Whitney test was performed to assess the differences in terms of time to fracture and the length of the fractured segment between the flat- and non-flat-sided instruments. Significance was set at p = 0.05. The differences in terms of time to fracture between non-flat and flat were statistically significant (p < 0.001). In addition, the differences in terms of fractured segment length were statistically significant (p = 0.034). The results of this study highlight the importance of flat-sided design in increasing the cyclic fatigue lifespan of NiTi rotary instruments

A novel SiO2/Polyetherimide (PEI) Composite Synthesized by Sol-Gel Route: Characterization and Antibacterial Activity

Polyetherimide (PEI), an amorphous thermoplastic material, is a promising candidate for wide applications due to its high heat stability and its biocompatibility in human tissues. In the present paper, PEI (4 wt%) is added to SiO2 inorganic matrix in order to obtain a novel composite biomaterial through sol-gel route. Structural characterization by means of Fourier Transform Infrared Spectroscopy (FTIR) confirmed, through hydrogen bond interactions, the presence of both organic and inorganic components in the structure. Concerning the compatibility in the biological systems, a study of antibacterial properties is carried out, analyzing the effect of SiO2/PEI composite on Escherichia coli (gram-negative) and Enterococcus faecalis (gram-positive)

Functionalization of 3D Polylactic Acid Sponge Using Atmospheric Pressure Cold Plasma

The deposition of organic functionalities on biomaterials to immobilize biomolecules is a research area of great interest in the medical field. The surface functionalization of a 3D porous scaffolds of PDLLA with carboxyl (-COOH) and amino (-NH2) groups by cold plasma treatment at atmospheric pressure is described in this paper. Two methods of continuous and pulsed plasma deposition were compared to assess the degree of functionalization of the internal porous 3D scaffold. In particular, the pulsed plasma treatment was found to functionalize uniformly not only the sample surface but also inside the open cavities thanks to its permeability and diffusion in the porous 3D scaffold. The species developed in the plasma were studied by optical emission spectroscopy (OES) technique, while the functionalization of the sponges was evaluated by the Diffuse Reflectance Fourier-Transform Infrared Spectroscopy (DR-FTIR) technique using also the adsorption of ammonia (NH3) and deuterated water (D2O) probe molecules. The functional groups were deposited only on the front of the sponge, then the structural characterization of both front and back of the sponge has demonstrated the uniform functionalization of the entire scaffold

Recycling of Waste Corundum Abrasive Powder in Mk-Based Geopolymers

Recycling corundum abrasive powder in metakaolin-based geopolymer formulations is proposed to reduce the amount of waste to be treated or disposed of in landfills, allowing to decrease ecological damage as well as to reduce transport costs for removal. The addition of waste corundum, as an important source of Al2O3, has proved to increase the slightly ionic conductivity of the leachate solution obtained after immersion in water of samples at 28 d of curing at room temperature. With the same curing conditions, the geopolymerization process has not been disturbed as evidenced by the FT-IR peak shift and XRD patterns. It was recorded a decrease in resistance to compression of the consolidated geopolymers of about 5% with 10 wt% addition and of about 77% with the addition of 20 wt% of waste corundum. In any case, the waste abrasive powder does not release heavy metals when added to a geopolymeric formulation based on MK, NaOH, and Na-silicate, and does not show relevant antibacterial properties, indicating the formation of a stable and safe final product with a ceramic-like appearance

Annealing of bismuth telluride-based thick films by laser irradiation

Interest towards fabrication and post-processing of thermoelectric micro-sized devices has increased in recent years. The coupling of inexpensive deposition technologies and fast laser treatments on “as-deposited” films is an attractive solution for industrial scalability. In this work, we propose an approach never reported before in literature: the utilization of a ns-pulsed active fibre laser to directly densify p-type bismuth telluride-based thick films deposited on silicon. A feasibility study was conducted on the material to determine optimal laser parameters: the treated products were characterized, and it was concluded that a value of laser fluence as low as 4.5 mJ cm−2 is sufficient for densification. The material resulted cracked after the laser treatment, and it was demonstrated by SEM and profilometric analyses that shrinking occurs and sintering necks are formed; further, the arising of second phases after annealing was excluded by means of XRD analysis. Envisioning an industrial large area process with linear diode arrays source, a prediction of the laser power requirements to irradiate 1 mm2 films in selected conditions is presented. More extensive studies will be performed to determine a narrower parameters window and determine a relationship between the film thickness and laser parameters for future applications to as-deposited films

Peri-implant marginal bone changes and soft tissue conditions around single implants with laser-microgrooved collar placed in regenerated extraction sockets and in native bone: 2-year results of RCT

The aim of present study was to compare peri-implant marginal bone changes and soft tissues conditions around single implants placed in alveolar sockets regenerated with porcine xenograft and collagen membrane or non-regenerated native bone. Forty patients who required single tooth extraction and single implant placement in premolar/molar area, were enrolled in this study. Subjects were randomly assigned to the control group (S; extraction sockets spontaneously healed) or to the test group (R; extraction sockets grafted with porcine-derived bone and covered with collagen membrane). Six months after extractions, single tapered implants with laser-microgrooved collars were inserted. For each implant, radiographic MBL and clinical parameters were evaluated during 2 years of function. At the 24-month follow-up, a survival rate of 100% was reported for all implants. For the S group, the mean marginal bone loss (MBL) was 0.118 ± 0.07 mm while for the R group the mean MBL was 0.131± 0.03 mm. No statistically significant differences were reported among groups (P >0.05). Between the two groups, no statistically significant differences were found also for plaque index, bleeding on probing, probing depth and gingival recession. At the 24-month follow-up, results showed that implants with laser-microgrooved collar surface placed in regenerated extraction sockets and in native bone did not performed differently with respect to implant survival, MBL and peri-implant soft tissue parameters

Changes of radiographic trabecular bone density and peri-implant marginal bone vertical dimensions around non-submerged dental implants with a laser-microtextured collar after 5 years of functional loading

Objectives: The progressive peri-implant bone remodeling caused by dynamic cycles of microdamage may change peri-implant bone characteristics and volume after the functional loading. This prospective study was designed to evaluate the radiographic trabecular bone density and peri-implant vertical dimensional changes around the non submerged dental implant with a laser-microtextured collar (NSLI)s after 5 years of functional loading. Methods: Digital periapical radiographs of 58 NSLIs supported fixed single crowns and fixed partial dentures in 26 patients (14 men, mean age of 52 ± 3.8 years) were used for comparative evaluation between the implant placement [Baseline (BSL)], the definitive Crowns Delivery (CD) and the 5 years post-functional loading examination (T5). Regions of interest (ROI) were taken into consideration for the measurement of mean gray levels, standard deviation, and variation coefficient. The texture parameters, such as contrast, correlation, angular second moment and entropy, were investigated by using the software ImageJ (v.1.50i), by means of the Gray-level Co-occurrence Matrix (GLCM) Texture Tool plugin. Vertical Periimplant Marginal Bone Level (VPMBL) was assessed at the mesial and the distal sides of each implant by subtracting the measure at BSL from the measure at T5 by means of dedicate software (VixWin Platinum Imaging Software). Mixed regression models were adopted to analyze data. The possible effects of some variables, such as the use of provisional denture, location, crown/implant ratio, type of prosthetic design (single or splinted), on radiographic dimensional vertical changes, gray levels and texture analysis variables were also evaluated. Results: From BSL to T5, mesial and distal VPMBL showed a statistically significant gain of 0.9 ±0.5, and 0.10 mm ±0.6, respectively (P<0.05). From CD to T5, mean gray levels increased from 94.4±26.8) to 111.8±27.1 (P<0.05), while the coefficient of variation decreased from 0.08±0,03 to 0.05±0.04) (P<0.05). Variables showed no statistically significant correlation with texture parameters (P > 0.05). Conclusion: NSLIs showed an increase in radiographic vertical peri-implant marginal bone levels and bone density up to 5 years of loading