65 research outputs found

    The Influence of Neutron Irradiation on (B0.65C0.35)Ba1.4Sr0.6Ca2Cu3Oz Superconducting Phase: the Role of the Grain Edge

    Full text link
    Using the transport and magnetization measurements the influence of neutron irradiation at a fluence of 5x1017^{17} n cm2^{-2} on (B0.65C0.35)Ba1.4Sr0.6Ca2Cu3Oz has been investigated. The neutron irradiation was found to decrease critical temperature and transport critical current density, increase the residual and normal state resistivity, and improve the intragranular critical current density with 1.6x1057^{57} A/cm2^{2} (at 77.3K and in the applied field up to 160 kA m) and \Delta Mirr/\Delta Mnonirr ratio (up to factor of 3) at highest field used for investigation. The field dependence of this ratio, which is below the unity at very low field but higher than 1 at high fields, correlated with the shape of the hystertic loops as well as with the change of the transport parameters after irradiation suggests the role of the irradiation induced effects on the grain edges. We discuss these effects in the framework of the Bean-Livingstone surface barriers and geometrical barriers.Comment: 12 pages, 5 figure

    Freshwater Seepage Into Sediments of the Shelf, Shelf Edge, and Continental Slope of the Canadian Beaufort Sea

    Get PDF
    Long‐term warming of the continental shelf of the Canadian Beaufort Sea caused by the transgression associated with the last deglaciation may be causing decomposition of relict offshore subsea permafrost and gas hydrates. To evaluate this possibility, pore waters from 118 sediment cores up to 7.3‐m long were taken on the shelf and slope and analyzed for chloride concentrations and δ180 and δD composition. We observed downcore decreases in pore waters Cl− concentration in sediments from all sites from the inner shelf (<20‐m water depth), from the shelf edge, from the outer slope (down to 1,000‐m water depths), and from localized shelf features such as midshelf pingo‐like features and inner shelf pockmarks. In contrast, pore water freshening is absent from all investigated cores of the Mackenzie Trough. Downcore pore waters Cl− concentration decreases indicate regional widespread freshwater seepage. Extrapolations to zero Cl− of pore water Cl− versus δ180 regression lines indicate that freshwaters in these environments carry different isotope signatures and thus are sourced from different reservoirs. These isotopic signatures indicate that freshening of shelf sediments pore waters is a result of downward infiltration of Mackenzie River water, freshening of shelf edge sediments is due to relict submarine permafrost degradation or gas hydrate decomposition under the shelf, and freshening of slope sediments is consistent with regional groundwater flow and submarine groundwater discharge as far as 150 km from shore. These results confirm ongoing decomposition of offshore permafrost and suggest extensive current groundwater discharge far from the coast

    Development and evaluation of a secondary reference panel for BCR-ABL1 quantitation on the International Scale

    Get PDF
    Molecular monitoring of chronic myeloid leukemia patients using robust BCR-ABL1 tests standardized to the International Scale (IS) is key to proper disease management, especially when treatment cessation is considered. Most laboratories currently utilize a time-consuming sample exchange process with reference laboratories for IS calibration. A World Health Organization (WHO) BCR-ABL1 reference panel was developed (MR1-MR4), but access to the material is limited. In this study, we describe the development of the first cell-based secondary reference panel that’s traceable to and faithfully replicates the WHO panel, with an additional MR4.5 level. The secondary panel was calibrated to IS using digital PCR with ABL1, BCR, and GUSB as reference genes and evaluated by 44 laboratories worldwide. Interestingly, we found that &gt;40% of BCR-ABL1 assays showed signs of inadequate optimization such as poor linearity and suboptimal PCR efficiency. Nonetheless, when optimized sample inputs were used, &gt;60% demonstrated satisfactory IS accuracy, precision and/or MR4.5 sensitivity, and 58% obtained IS conversion factors from the secondary reference concordant with their current ones. Correlation analysis indicated no significant alterations in %BCR-ABL1 results caused by different assay configurations. More assays achieved good precision and/or sensitivity than IS accuracy, indicating the need for better IS calibration mechanisms
    corecore