Characteristics of the injected ion beam in the ECR charge breeder 1+→n+1^{+}\to n^{+}

Different ion species (rare gases, alkali, metallic) have been injected on the axis of the MINIMAFIOS - 10 GHz - Electron Cyclotron Resonance Ion Source which is the basics of the 1+ -> n+ method, special attention have been paid to the optics of the incoming beam for the validation of the 1+ -> n+ method for the SPIRAL project (Radioactive Ion Beam facility). The capture of the incoming ion beam by the ECR plasma depends, first, on the relative energy of the incoming ions with respect to the average ion energy in the plasma, and secondly, on the optics of the injection line. The efficiency of the process when varying the potential V n+ of the MINIMAFIOS source with respect to the potential V 1+ applied to the 1+ source (DV=V n+ -V 1+ ) is an image of the energy dispersion of the 1+ beam. 1+ -> n+ spectra efficiencies, DV efficiency dependence for the most efficient charge state obtained, and measured primary beam emittances are given for the Ar, Rb, Pb, Cr. Highest efficiencies obtained are respectively Ar1+ -> Ar8+ : 8.7 %, Rb1+ -> Rb15+ : 5.5 %, Pb 1+ -> Pb 22+ : 4.8 % , Cr 1+ -> Cr 12+ : 3.5 %. Last results obtained are given for Sulfur and Uranium

High Current, High frequency ECRIS development program for LHC heavy ion beam application

A research program with the aim of producing pulsed currents with hitherto unequalled intensity of Pb27+, with length and repetition ratecompatible with those desired by CERN (1 mAe / 400 ms / 10 Hz in the context of future heavy ion collisions at LHC) is organised in acollaboration between CERN/GSI/CEA-Grenoble and IN2P3-ISNG.Two main experimental programs will be carried out : (i) tests with the LNS-Catania team on the SERSE superconducting source with a 28 GHzgyrotron, (ii) tests on a non-superconducting source (new source at Grenoble) with a 28 GHz gyrotron. For this purpose CEA/DRFMC hasborrowed from CEA a 28 GHz - 10 kW gyrotron transmitter.The project includes also the construction of a source body, by ISNG, with conventional coils and permanent magnets for working at the frequencyof about 28 GHz and biased up to 60 kV. This source called PHOENIX will run on a test bench at ISN. PHOENIX is an improvement of thepresent ECR4-14.5 GHz/CERN source, having a mirror ratio R=2 at 14.5 GHz, and R=1.7 at 28 GHz (possibly reaching 2.1 T on the axis of thesource), and with a plasma volume up to 2.5 larger.Experiments at 28 GHz will be performed on the SERSE source in Catania at INFN/LNS where both the axial and the hexapolar fields will bevaried so that the mirror ratio is continuously varied up to R=1.6 ; the SERSE source will be also operated at lower magnetic fields such as thosewhich can be produced by conventional magnets (less than 2 T axial field at injection - far from the 28 GHz High-B mode)

In Vivo Methods for the Assessment of Topical Drug Bioavailability

This paper reviews some current methods for the in vivo assessment of local cutaneous bioavailability in humans after topical drug application. After an introduction discussing the importance of local drug bioavailability assessment and the limitations of model-based predictions, the focus turns to the relevance of experimental studies. The available techniques are then reviewed in detail, with particular emphasis on the tape stripping and microdialysis methodologies. Other less developed techniques, including the skin biopsy, suction blister, follicle removal and confocal Raman spectroscopy techniques are also described

Predicting molybdenum toxicity to higher plants: Influence of soil properties

The effect of soil properties on the toxicity of molybdenum (Mo) to four plant species was investigated. Soil organic carbon or ammonium-oxalate extractable Fe oxides were found to be the best predictors of the 50% effective dose (ED50) of Mo in different soils, explaining > 65% of the variance in ED50 for four species except for ryegrass (26-38%). Molybdenum concentrations in soil solution and consequently plant uptake were increased when soil pH was artificially raised because sorption of Mo to amorphous oxides is greatly reduced at high pH. The addition of sulphate significantly decreased Mo uptake by oilseed rape. For risk assessment, we suggest that Mo toxicity values for plants should be normalised using soil amorphous iron oxide concentrations. (c) 2010 Elsevier Ltd. All rights reserved

Electron cyclotron resonance ion trap, a multicharged ion breeder/buncher

International audienceThe basic mode of operation of an electron cyclotron resonance ion source is recalled, particularly when using such a device as an ion charge breeder for the production of radioactive ion beams suitable for acceleration (1+→n+conversion). A new mode of operation, Electron Cyclotron Resonance Ion Trap (ECRIT), permitting to trap and bunch the n+ ion beams is demonstrated. The principle of the ECRIT mode is explained. The charge breeder/buncher system is experimentally verified by the injection of a 400 nA Rb1+ ion beam leading to a 11.5 μA peak current of the Rb15+ ion beam extracted during the first ms. The temporal evolution of the cumulated particle transformation efficiency is measured in the case of Rb15+ and shows a 2.2% efficiency during the first 20 ms of the ECRIT extraction. The interest of the ECRIT mode is finally shown when used for the production of high-energy radioactive ion beams. (Elsevier

Mineral Composition of Beef Cattle Carcasses

Mineral retention was measured in 76 beef steers. Cattle were grown at different rates of gain and then finished on a common diet. Calcium and P retention were not affected by treatment and were similar between the growing and finishing periods averaging 4.2 g P and 10.8 g Ca /100 g protein gain across both experiments. As ADG during the growing period was decreased, K, Mg, and S mineral retention during the finishing period were increased. Expressing mineral retention as g/100 g protein gain reducedvariation due to animal size and ADG and suggests that current NRC predictions are accurate