The detection of flaws in austenitic welds using the decomposition of the time reversal operator

The non-destructive testing of austenitic welds using ultrasound plays an important role in the assessment of the structural integrity of safety critical structures. The internal microstructure of these welds is highly scattering and can lead to the obscuration of defects when investigated by traditional imaging algorithms. This paper proposes an alternative objective method for the detection of flaws embedded in austenitic welds based on the singular value decomposition of the time-frequency domain response matrices. The distribution of the singular values is examined in the cases where a flaw exists and where there is no flaw present. A lower threshold on the singular values, specific to austenitic welds, is derived which, when exceeded, indicates the presence of a flaw. The detection criterion is successfully implemented on both synthetic and experimental data. The datasets arising from welds containing a flaw, are further interrogated using the decomposition of the time reversal operator (DORT) method and the total focussing method (TFM) and it is shown that images constructed via the DORT algorithm typically exhibit a higher signal to noise ratio than those constructed by the TFM algorithm

A Maximum Eigenvalue Approximation for Crack-Sizing Using Ultrasonic Arrays

Ultrasonic phased array systems are becoming increasingly popular as tools for the inspection of safety-critical structures with in the non-destructive testing industry. The datasets captured by these arrays can be used to image the internal microstructure of individual components, all owing the location and nature of any defects to be deduced. Unfortunately, many of the current imaging algorithms require an arbitrary threshold at which the defect measurements can be taken and this aspect of subjectivity can lead to varying characterisations of a flaw between different operators. This paper puts forward an objective approach based on the Kirchoff scattering model and the approximation of the resulting scattering matrices by Toeplitz matrices. A mathematical expression relating the crack size to the maximum eigenvalue of the associated scattering matrix is thus derived. The formula is analysed numerically to assess its sensitivity to the system parameters and it is shown that the method is most effective for sizing defects that are commensurate with the wavelength of the ultrasonic wave (or just smaller than. The method is applied to simulated FMC data arising from finite element calculations where the crack length to wavelength ratios range between 0.6 and 1.8. The recovered objective crack size exhibits an error of 12%

Minimum Information about a Neuroscience Investigation (MINI) Electrophysiology

This module represents the formalized opinion of the authors and the CARMEN consortium, which identifies the minimum information required to report the use of electrophysiology in a neuroscience study, for submission to the CARMEN system (www.carmen.org.uk).
&#xa

"Any lady can do this without much trouble ...": class and gender in The dining room (1878)

Macmillan's "Art at Home" series (1876–83) was a collection of domestic advice manuals. Mentioned in every study of the late-nineteenth-century domestic interior, they have often been interpreted, alongside contemporary publications such as Charles Eastlake's Hints on Household Taste (1868), as indicators of late 1870s home furnishing styles. Mrs Loftie's The Dining Room (1878) was the series' fifth book and it considers one of the home's principal (and traditionally masculine) domestic spaces. Recent research on middle-class cultural practices surrounding food has placed The Dining Room within the tradition of Mrs Beeton's Household Management (1861); however, it is not a cookery book and hardly mentions dinners. Drawing upon unpublished archival sources, this paper charts the production and reception of The Dining Room, aiming to unravel its relationships with other contemporary texts and to highlight the difficulties of using it as historical evidence. While it offers fascinating insights into contemporary taste, class and gender, this paper suggests that, as an example of domestic design advice literature, it reveals far more about the often expedient world of nineteenth-century publishing practices

Oil spill problems and sustainable response strategies through new technologies

Crude oil and petroleum products are widespread water and soil pollutants resulting from marine and terrestrial spillages. International statistics of oil spill sizes for all incidents indicate that the majority of oil spills are small (less than 7 tonnes). The major accidents that happen in the oil industry contribute only a small fraction of the total oil which enters the environment. However, the nature of accidental releases is that they highly pollute small areas and have the potential to devastate the biota locally. There are several routes by which oil can get back to humans from accidental spills, e.g. through accumulation in fish and shellfish, through consumption of contaminated groundwater. Although advances have been made in the prevention of accidents, this does not apply in all countries, and by the random nature of oil spill events, total prevention is not feasible. Therefore, considerable world-wide effort has gone into strategies for minimising accidental spills and the design of new remedial technologies. This paper summarizes new knowledge as well as research and technology gaps essential for developing appropriate decision-making tools in actual spill scenarios. Since oil exploration is being driven into deeper waters and more remote, fragile environments, the risk of future accidents becomes much higher. The innovative safety and accident prevention approaches summarized in this paper are currently important for a range of stakeholders, including the oil industry, the scientific community and the public. Ultimately an integrated approach to prevention and remediation that accelerates an early warning protocol in the event of a spill would get the most appropriate technology selected and implemented as early as possible-the first few hours after a spill are crucial to the outcome of the remedial effort. A particular focus is made on bioremediation as environmentally harmless, cost-effective and relatively inexpensive technology. Greater penetration into the remedial technologies market depends on the harmonization of environment legislation and the application of modern laboratory techniques, e.g. ecogenomics, to improve the predictability of bioremediation

The Effectiveness of Alcohol Screening and Brief Intervention in Emergency Departments: A Multicentre Pragmatic Cluster Randomized Controlled Trial

BACKGROUND: Alcohol misuse is common in people attending emergency departments (EDs) and there is some evidence of efficacy of alcohol screening and brief interventions (SBI). This study investigated the effectiveness of SBI approaches of different intensities delivered by ED staff in nine typical EDs in England: the SIPS ED trial. METHODS AND FINDINGS: Pragmatic multicentre cluster randomized controlled trial of SBI for hazardous and harmful drinkers presenting to ED. Nine EDs were randomized to three conditions: a patient information leaflet (PIL), 5 minutes of brief advice (BA), and referral to an alcohol health worker who provided 20 minutes of brief lifestyle counseling (BLC). The primary outcome measure was the Alcohol Use Disorders Identification Test (AUDIT) status at 6 months. Of 5899 patients aged 18 or more presenting to EDs, 3737 (63·3%) were eligible to participate and 1497 (40·1%) screened positive for hazardous or harmful drinking, of whom 1204 (80·4%) gave consent to participate in the trial. Follow up rates were 72% (n?=?863) at six, and 67% (n?=?810) at 12 months. There was no evidence of any differences between intervention conditions for AUDIT status or any other outcome measures at months 6 or 12 in an intention to treat analysis. At month 6, compared to the PIL group, the odds ratio of being AUDIT negative for brief advice was 1·103 (95% CI 0·328 to 3·715). The odds ratio comparing BLC to PIL was 1·247 (95% CI 0·315 to 4·939). A per protocol analysis confirmed these findings. CONCLUSIONS: SBI is difficult to implement in typical EDs. The results do not support widespread implementation of alcohol SBI in ED beyond screening followed by simple clinical feedback and alcohol information, which is likely to be easier and less expensive to implement than more complex interventions

UK export performance research - review and implications

Previous research on export performance has been criticized for being a mosaic of autonomous endeavours and for a lack of theoretical development. Building upon extant models of export performance, and a review and analysis of research on export performance in the UK for the period 1990-2005, an integrated model of export performance is developed and theoretical explanations of export performance are put forward. It is suggested that a multi-theory approach to explaining export performance is viable. Management and policy implications for the UK emerging from the review and synthesis of the literature and the integrated model are discussed

Edge-control and surface-smoothness in sub-aperture polishing of mirror segments

This paper addresses two challenges in establishing a new process chain for polishing hexagonal segments for extremely large telescopes:- i) control of edge and corner profiles in small-tool polishing of hexagons, and ii) achieving the required smoothness of the bulk aspheric form. We briefly describe the performance of a CNC-grinding process used to create the off-axis asphere, which established the input-quality for subsequent processing. We then summarize processes for smoothing ground mid-spatials and pre- and corrective polishing using Zeeko CNC machines. The impact of two cases is considered; i) all processing stages are performed after the segment is cut hexagonal, and ii) final rectification of a hexagon after cutting from an aspherised roundel, as an alternative to ionfiguring. We then report on experimental results on witness samples demonstrating edges and corners close to the EELT segment specification, and results on a full-aperture spherical segment showing excellent surface smoothness. © 2012 SPIE

Potential risks of antibiotic resistant bacteria and genes in bioremediation of petroleum hydrocarbon contaminated soils

Bioremediation represents a sustainable approach to remediating petroleum hydrocarbon contaminated soils. One aspect of sustainability includes the sourcing of nutrients used to stimulate hydrocarbon-degrading microbial populations. Organic nutrients such as animal manure and sewage sludge may be perceived as more sustainable than conventional inorganic fertilizers. However, organic nutrients often contain antibiotic residues and resistant bacteria (along with resistance genes and mobile genetic elements). This is further exacerbated since antibiotic resistant bacteria may become more abundant in contaminated soils due to co-selection pressures from pollutants such as metals and hydrocarbons. We review the issues surrounding bioremediation of petroleum-hydrocarbon contaminated soils, as an example, and consider the potential human-health risks from antibiotic resistant bacteria. While awareness is coming to light, the relationship between contaminated land and antibiotic resistance remains largely under-explored. The risk of horizontal gene transfer between soil microorganisms, commensal bacteria and/or human pathogens needs to be further elucidated, and the environmental triggers for gene transfer need to be better understood. Findings of antibiotic resistance from animal manures are emerging, but even fewer bioremediation studies using sewage sludge have made any reference to antibiotic resistance. Resistance mechanisms, including those to antibiotics, have been considered by some authors to be a positive trait associated with resilience in strains intended for bioremediation. Nevertheless, recognition of the potential risks associated with antibiotic resistant bacteria and genes in contaminated soils appears to be increasing and requires further investigation. Careful selection of bacterial candidates for bioremediation possessing minimal antibiotic resistance as well as pre-treatment of organic wastes to reduce selective pressures (e.g., antibiotic residues) are suggested to prevent environmental contamination with antibiotic-resistant bacteria and genes

Expression of a glycosylphosphatidylinositol-anchored ligand, growth hormone, blocks receptor signalling

We have investigated the interaction between GH (growth hormone) and GHR (GH receptor). We previously demonstrated that a truncated GHR that possesses a transmembrane domain but no cytoplasmic domain blocks receptor signalling. Based on this observation we investigated the impact of tethering the receptor's extracellular domain to the cell surface using a native lipid GPI (glycosylphosphatidylinositol) anchor. We also investigated the effect of tethering GH, the ligand itself, to the cell surface and demonstrated that tethering either the ecGHR (extracellular domain of GHR) or the ligand itself to the cell membrane via a GPI anchor greatly attenuates signalling. To elucidate the mechanism for this antagonist activity, we used confocal microscopy to examine the fluorescently modified ligand and receptor. GH–GPI was expressed on the cell surface and formed inactive receptor complexes that failed to internalize and blocked receptor activation. In conclusion, contrary to expectation, tethering an agonist to the cell surface can generate an inactive hormone receptor complex that fails to internalize