Phase variation and microevolution at homopolymeric tracts in Bordetella pertussis

<p>Abstract</p> <p>Background</p> <p><it>Bordetella pertussis</it>, the causative agent of whooping cough, is a highly clonal pathogen of the respiratory tract. Its lack of genetic diversity, relative to many bacterial pathogens, could limit its ability to adapt to a hostile and changing host environment. This limitation might be overcome by phase variation, as observed for other mucosal pathogens. One of the most common mechanisms of phase variation is reversible expansion or contraction of homopolymeric tracts (HPTs).</p> <p>Results</p> <p>The genomes of <it>B. pertussis </it>and the two closely related species, <it>B. bronchiseptica </it>and <it>B. parapertussis</it>, were screened for homopolymeric tracts longer than expected on the basis of chance, given their nucleotide compositions. Sixty-nine such HPTs were found in total among the three genomes, 74% of which were polymorphic among the three species. Nine HPTs were genotyped in a collection of 90 geographically and temporally diverse <it>B. pertussis </it>strains using the polymerase chain reaction/ligase detection reaction (PCR/LDR) assay. Six HPTs were polymorphic in this collection of <it>B. pertussis </it>strains. Of note, one of these polymorphic HPTs was found in the <it>fimX </it>promoter, where a single base insertion variant was present in seven strains, all of which were isolated prior to introduction of the pertussis vaccine. Transcript abundance of <it>fimX </it>was found to be 3.8-fold lower in strains carrying the longer allele. HPTs in three other genes, <it>tcfA</it>, <it>bapC</it>, and BP3651, varied widely in composition across the strain collection and displayed allelic polymorphism within single cultures.</p> <p>Conclusion</p> <p>Allelic polymorphism at homopolymeric tracts is common within the <it>B. pertussis </it>genome. Phase variability may be an important mechanism in <it>B. pertussis </it>for evasion of the immune system and adaptation to different niches in the human host. High sensitivity and specificity make the PCR/LDR assay a powerful tool for investigating allelic variation at HPTs. Using this method, allelic diversity and phase variation were demonstrated at several <it>B. pertussis </it>loci.</p

Bordetella pertussis, the Causative Agent of Whooping Cough, Evolved from a Distinct, Human-Associated Lineage of B. bronchiseptica

Bordetella pertussis, B. bronchiseptica, B. parapertussis(hu), and B. parapertussis(ov) are closely related respiratory pathogens that infect mammalian species. B. pertussis and B. parapertussis(hu) are exclusively human pathogens and cause whooping cough, or pertussis, a disease that has resurged despite vaccination. Although it most often infects animals, infrequently B. bronchiseptica is isolated from humans, and these infections are thought to be zoonotic. B. pertussis and B. parapertussis(hu) are assumed to have evolved from a B. bronchiseptica–like ancestor independently. To determine the phylogenetic relationships among these species, housekeeping and virulence genes were sequenced, comparative genomic hybridizations were performed using DNA microarrays, and the distribution of insertion sequence elements was determined, using a collection of 132 strains. This multifaceted approach distinguished four complexes, representing B. pertussis, B. parapertussis(hu), and two distinct B. bronchiseptica subpopulations, designated complexes I and IV. Of the two B. bronchiseptica complexes, complex IV was more closely related to B. pertussis. Of interest, while only 32% of the complex I strains were isolated from humans, 80% of the complex IV strains were human isolates. Comparative genomic hybridization analysis identified the absence of the pertussis toxin locus and dermonecrotic toxin gene, as well as a polymorphic lipopolysaccharide biosynthesis locus, as associated with adaptation of complex IV strains to the human host. Lipopolysaccharide structural diversity among these strains was confirmed by gel electrophoresis. Thus, complex IV strains may comprise a human-associated lineage of B. bronchiseptica from which B. pertussis evolved. These findings will facilitate the study of pathogen host-adaptation. Our results shed light on the origins of the disease pertussis and suggest that the association of B. pertussis with humans may be more ancient than previously assumed

The Burst Alert Telescope (BAT) on the Swift MIDEX Mission

The Burst Alert Telescope (BAT) is one of 3 instruments on the Swift MIDEX spacecraft to study gamma-ray bursts (GRBs). The BAT first detects the GRB and localizes the burst direction to an accuracy of 1-4 arcmin within 20 sec after the start of the event. The GRB trigger initiates an autonomous spacecraft slew to point the two narrow field-of-view (FOV) instruments at the burst location within 20-70 sec so to make follow-up x-ray and optical observations. The BAT is a wide-FOV, coded-aperture instrument with a CdZnTe detector plane. The detector plane is composed of 32,768 pieces of CdZnTe (4x4x2mm), and the coded-aperture mask is composed of approximately 52,000 pieces of lead (5x5x1mm) with a 1-m separation between mask and detector plane. The BAT operates over the 15-150 keV energy range with approximately 7 keV resolution, a sensitivity of approximately 10E-8 erg*cm^-2*s^-1, and a 1.4 sr (half-coded) FOV. We expect to detect >100 GRBs/yr for a 2-year mission. The BAT also performs an all-sky hard x-ray survey with a sensitivity of approximately 2 mCrab (systematic limit) and it serves as a hard x-ray transient monitor.Comment: 18 Pages, 12 Figures, To be published in Space Science Review

Abdo-Man: a 3D-printed anthropomorphic phantom for validating quantitative SIRT.

Background The use of selective internal radiation therapy (SIRT) is rapidly increasing, and the need for quantification and dosimetry is becoming more widespread to facilitate treatment planning and verification. The aim of this project was to develop an anthropomorphic phantom that can be used as a validation tool for post-SIRT imaging and its application to dosimetry.Method The phantom design was based on anatomical data obtained from a T1-weighted volume-interpolated breath-hold examination (VIBE) on a Siemens Aera 1.5 T MRI scanner. The liver, lungs and abdominal trunk were segmented using the Hermes image processing workstation. Organ volumes were then uploaded to the Delft Visualization and Image processing Development Environment for smoothing and surface rendering. Triangular meshes defining the iso-surfaces were saved as stereo lithography (STL) files and imported into the Autodesk® Meshmixer software. Organ volumes were subtracted from the abdomen and a removable base designed to allow access to the liver cavity. Connection points for placing lesion inserts and filling holes were also included. The phantom was manufactured using a Stratasys Connex3 PolyJet 3D printer. The printer uses stereolithography technology combined with ink jet printing. Print material is a solid acrylic plastic, with similar properties to polymethylmethacrylate (PMMA).Results Measured Hounsfield units and calculated attenuation coefficients of the material were shown to also be similar to PMMA. Total print time for the phantom was approximately 5 days. Initial scans of the phantom have been performed with Y-90 bremsstrahlung SPECT/CT, Y-90 PET/CT and Tc-99m SPECT/CT. The CT component of these images compared well with the original anatomical reference, and measurements of volume agreed to within 9 %. Quantitative analysis of the phantom was performed using all three imaging techniques. Lesion and normal liver absorbed doses were calculated from the quantitative images in three dimensions using the local deposition method.Conclusions 3D printing is a flexible and cost-efficient technology for manufacture of anthropomorphic phantom. Application of such phantoms will enable quantitative imaging and dosimetry methodologies to be evaluated, which with optimisation could help improve outcome for patients

Accurate, rapid and high-throughput detection of strain-specific polymorphisms in Bacillus anthracis and Yersinia pestis by next-generation sequencing

Background: In the event of biocrimes or infectious disease outbreaks, high-resolution genetic characterization for identifying the agent and attributing it to a specific source can be crucial for an effective response. Until recently, in-depth genetic characterization required expensive and time-consuming Sanger sequencing of a few strains, followed by genotyping of a small number of marker loci in a panel of isolates at or by gel-based approaches such as pulsed field gel electrophoresis, which by necessity ignores most of the genome. Next-generation, massively parallel sequencing (MPS) technology (specifically the Applied Biosystems sequencing by oligonucleotide ligation and detection (SOLiD™) system) is a powerful investigative tool for rapid, cost-effective and parallel microbial whole-genome characterization. Results: To demonstrate the utility of MPS for whole-genome typing of monomorphic pathogens, four Bacillus anthracis and four Yersinia pestis strains were sequenced in parallel. Reads were aligned to complete reference genomes, and genomic variations were identified. Resequencing of the B. anthracis Ames ancestor strain detected no false-positive single-nucleotide polymorphisms (SNPs), and mapping of reads to the Sterne strain correctly identified 98% of the 133 SNPs that are not clustered or associated with repeats. Three geographically distinct B. anthracis strains from the A branch lineage were found to have between 352 and 471 SNPs each, relative to the Ames genome, and one strain harbored a genomic amplification. Sequencing of four Y. pestis strains from the Orientalis lineage identified between 20 and 54 SNPs per strain relative to the CO92 genome, with the single Bolivian isolate having approximately twice as many SNPs as the three more closely related North American strains. Coverage plotting also revealed a common deletion in two strains and an amplification in the Bolivian strain that appear to be due to insertion element-mediated recombination events. Most private SNPs (that is, a, variant found in only one strain in this set) selected for validation by Sanger sequencing were confirmed, although rare falsepositive SNPs were associated with variable nucleotide tandem repeats. Conclusions: The high-throughput, multiplexing capability, and accuracy of this system make it suitable for rapid whole-genome typing of microbial pathogens during a forensic or epidemiological investigation. By interrogating nearly every base of the genome, rare polymorphisms can be reliably discovered, thus facilitating high-resolution strain tracking and strengthening forensic attribution

Do female association preferences predict the likelihood of reproduction?

Sexual selection acting on male traits through female mate choice is commonly inferred from female association preferences in dichotomous mate choice experiments. However, there are surprisingly few empirical demonstrations that such association preferences predict the likelihood of females reproducing with a particular male. This information is essential to confirm association preferences as good predictors of mate choice. We used green swordtails (&lt;i&gt;Xiphophorus helleri&lt;/i&gt;) to test whether association preferences predict the likelihood of a female reproducing with a male. Females were tested for a preference for long- or short-sworded males in a standard dichotomous choice experiment and then allowed free access to either their preferred or non-preferred male. If females subsequently failed to produce fry, they were provided a second unfamiliar male with similar sword length to the first male. Females were more likely to reproduce with preferred than non-preferred males, but for those that reproduced, neither the status (preferred/non-preferred) nor the sword length (long/short) of the male had an effect on brood size or relative investment in growth by the female. There was no overall preference based on sword length in this study, but male sword length did affect likelihood of reproduction, with females more likely to reproduce with long- than short-sworded males (independent of preference for such males in earlier choice tests). These results suggest that female association preferences are good indicators of female mate choice but that ornament characteristics of the male are also important

New Frontiers for Organismal Biology

Understanding how complex organisms function as integrated units that constantly interact with their environment is a long-standing challenge in biology. To address this challenge, organismal biology reveals general organizing principles of physiological systems and behavior—in particular, in complex multicellular animals. Organismal biology also focuses on the role of individual variability in the evolutionary maintenance of diversity. To broadly advance these frontiers, cross-compatibility of experimental designs, methodological approaches, and data interpretation pipelines represents a key prerequisite. It is now possible to rapidly and systematically analyze complete genomes to elucidate genetic variation associated with traits and conditions that define individuals, populations, and species. However, genetic variation alone does not explain the varied individual physiology and behavior of complex organisms. We propose that such emergent properties of complex organisms can best be explained through a renewed emphasis on the context and life-history dependence of individual phenotypes to complement genetic data.Organismic and Evolutionary Biolog

Prospective Genomic Characterization of the German Enterohemorrhagic Escherichia coli O104:H4 Outbreak by Rapid Next Generation Sequencing Technology

An ongoing outbreak of exceptionally virulent Shiga toxin (Stx)-producing Escherichia coli O104:H4 centered in Germany, has caused over 830 cases of hemolytic uremic syndrome (HUS) and 46 deaths since May 2011. Serotype O104:H4, which has not been detected in animals, has rarely been associated with HUS in the past. To prospectively elucidate the unique characteristics of this strain in the early stages of this outbreak, we applied whole genome sequencing on the Life Technologies Ion Torrent PGM™ sequencer and Optical Mapping to characterize one outbreak isolate (LB226692) and a historic O104:H4 HUS isolate from 2001 (01-09591). Reference guided draft assemblies of both strains were completed with the newly introduced PGM™ within 62 hours. The HUS-associated strains both carried genes typically found in two types of pathogenic E. coli, enteroaggregative E. coli (EAEC) and enterohemorrhagic E. coli (EHEC). Phylogenetic analyses of 1,144 core E. coli genes indicate that the HUS-causing O104:H4 strains and the previously published sequence of the EAEC strain 55989 show a close relationship but are only distantly related to common EHEC serotypes. Though closely related, the outbreak strain differs from the 2001 strain in plasmid content and fimbrial genes. We propose a model in which EAEC 55989 and EHEC O104:H4 strains evolved from a common EHEC O104:H4 progenitor, and suggest that by stepwise gain and loss of chromosomal and plasmid-encoded virulence factors, a highly pathogenic hybrid of EAEC and EHEC emerged as the current outbreak clone. In conclusion, rapid next-generation technologies facilitated prospective whole genome characterization in the early stages of an outbreak