240 research outputs found

    Nurturing the Remarkable Powers of Children

    Get PDF

    SRB environment evaluation and analysis. Volume 1: Redesigned SRB flight heating evaluation

    Get PDF
    Following the Space Shuttle STS-51L disaster on January 28, 1986, a considerable redesign effort was launched on the Solid Rocket Booster. This effort culminated in three instrumented flights, STS-26R, 27R, and 29R, beginning in September of 1989. Aeroheating data were obtained on these flights in the form of pressure, heat flux, and gas temperature probe measurements. These data were analyzed from an ascent and reentry heating point of view. The flight data were verified, compared with historic and theoretical results, and scaled to design. Impact of these results on the current design environment set was assessed and recommendations made. This report documents this effort

    External tank aerothermal design criteria verification, volume 2

    Get PDF
    The objective of the study was to produce an independent set of ascent environments which would serve as a check on the Rockwell International (RI) IVBC-3 environments and provide an independent reevaluation of the thermal design criteria for the External Tank (ET). Given here are the plotted timewise environments comparing REMTECH results to the RI IVBC results

    Essentials of forensic accounting

    Get PDF
    https://egrove.olemiss.edu/aicpa_guides/2728/thumbnail.jp

    1-D Transient Thermal Modeling of an Ablative Material (MCC-1) Exposed to a Simulated Convective Titan 4 Launch Environment

    Get PDF
    The purpose of the work is to demonstrate that the flat test panel substrate temperatures are consistent with analysis predictions for MCC-1 applied to a aluminum substrate. The testing was performed in an aerothermal facility on samples of three different thicknesses of MCC-1 on an aluminum substrate. The results of the test were compared with a Transient Thermal model. The key assumptions of the Transient Thermal model were: (1) a one-dimensional heat transfer; (2) a constant ablation recession rate (determined from pre and post-test measurements); (3) ablation temperature of 540 degrees F; (4) Char left behind the ablation front; and (5) temperature jump correction for incident heat transfer coefficient. Two methods were used to model the heating of bare MCC-1: (1) Directly input surface temperature as a function of time; and (2) Aerothermal heating using calibration plate data and subtracting the radiation losses to tunnel walls. The results are presented as graphs. This article is presented in Viewgraph format

    Subcutaneously administered Menopur(R), a new highly purified human menopausal gonadotropin, causes significantly fewer injection site reactions than Repronex(R) in subjects undergoing in vitro fertilization

    Get PDF
    BACKGROUND: The safety and tolerability of a new highly purified, urine-derived human menopausal gonadotropin (hMG) preparation [Menopur(R)] was compared with a currently available hMG [Repronex (R)] in women undergoing in vitro fertilization (IVF). METHODS: This was a randomized, open-label, parallel-group, multicenter study conducted in subjects undergoing IVF. Women (N = 125), 18–39 years of age, underwent pituitary down-regulation with leuprolide acetate beginning 7 days prior to onset of menses and continuing up to the day before hCG administration. Subjects were randomized to receive subcutaneous (SC) Menopur (R) (n = 61) or Repronex (R) SC (n = 64) for a maximum of 12 days. All adverse events (AEs) were recorded and subject self-assessments of injection site reactions were recorded in a daily diary. RESULTS: Significantly fewer subjects in the Menopur (R) group reported injection site reactions (P < 0.001) compared to the Repronex (R) group. Overall, there was no statistically significant difference in the incidence of AEs between the two treatment groups. CONCLUSION: Menopur (R) SC offers a greater safety and tolerability profile compared to Repronex (R) SC

    Predictions for the X-ray circumgalactic medium of edge-on discs and spheroids

    Get PDF
    We investigate how the X-ray circumgalactic medium (CGM) of present-day galaxies depends on galaxy morphology and azimuthal angle using mock observations generated from the EAGLE cosmological hydrodynamic simulation. By creating mock stacks of {\it eROSITA}-observed galaxies oriented to be edge-on, we make several observationally-testable predictions for galaxies in the stellar mass range M=1010.711.2  M_\star=10^{10.7-11.2}\;M_{\odot}. The soft X-ray CGM of disc galaxies is between 60 and 100\% brighter along the semi-major axis compared to the semi-minor axis, between 10-30 kpc. This azimuthal dependence is a consequence of the hot (T>106T>10^6 K) CGM being non-spherical: specifically it is flattened along the minor axis such that denser and more luminous gas resides in the disc plane and co-rotates with the galaxy. Outflows enrich and heat the CGM preferentially perpendicular to the disc, but we do not find an observationally-detectable signature along the semi-minor axis. Spheroidal galaxies have hotter CGMs than disc galaxies related to spheroids residing at higher halos masses, which may be measurable through hardness ratios spanning the 0.21.50.2-1.5 keV band. While spheroids appear to have brighter CGMs than discs for the selected fixed MM_\star bin, this owes to spheroids having higher stellar and halo masses within that MM_\star bin, and obscures the fact that both simulated populations have similar total CGM luminosities at the exact same MM_\star. Discs have brighter emission inside 20 kpc and more steeply declining profiles with radius than spheroids. We predict that the {\it eROSITA} 4-year all-sky survey should detect many of the signatures we predict here, although targeted follow-up observations of highly inclined nearby discs after the survey may be necessary to observe some of our azimuthally-dependent predictions.Comment: 12 pages, 11 figures, 1 table. Submitted to MNRAS. Comments welcom

    Variation in Quality of Diabetes Care at the Levels of Patient, Physician, and Clinic

    Get PDF
    Introduction: We studied variance in glycated hemoglobin (HbA1c) values among adults with diabetes to identify variation in quality of diabetes care at the levels of patient, physician, and clinic, and to identify which levels contribute the most to variation and which variables at each level are related to quality of diabetes care. Methods: Study subjects were 120 primary care physicians and their 2589 eligible adult patients with diabetes seen at 18 clinics. The dependent variable was HbA1c values recorded in clinical databases. Multivariate hierarchical models were used to partition variation in HbA1c values across the levels of patient, physician, or clinic and to identify significant predictors of HbA1c at each level. Results: More than 95% of variance in HbA1c values was attributable to the patient level. Much less variance was seen at the physician and clinic level. Inclusion of patient and physician covariates did not substantially change this pattern of results. Intensification of pharmacotherapy (t = −7.40, P \u3c .01) and patient age (t = 2.10, P \u3c .05) were related to favorable change in HbA1c. Physician age, physician specialty, number of diabetes patients per physician, patient comorbidity, and clinic assignment did not predict change in HbA1c value. The overall model with covariates explained 11.8% of change in HbA1c value over time. Conclusion: These data suggest that most variance in HbA1c values is attributable to patient factors, although physicians play a major role in some patient factors (e.g., intensification of medication). These findings may lead to more effective care-improvement strategies and accountability measures

    Measuring the indirect effect: Voter initiatives and legislative production in the American states

    Get PDF
    Accepted ManuscriptRecent research has identified important policy differences between voter initiative states and pure representative states despite a lack of enough observable voter initiative campaigns to explain the policy differences. This paper investigates the indirect effects of the voter initiative process on legislative production by estimating the number of bill enacted in the American states. The results indicate that legislators in voter initiative states enact more legislation as the difficulty in qualifying a voter initiative for the ballot decreases, as the legislature is less able to alter the effects of successful voter initiatives, and as the average number of voter initiatives that appear on the ballot increases. These results provide some statistical evidence of the indirect effect of the voter initiative and are consistent with the theory that policy differences in voter initiative states are the result of the indirect effect of the voter initiative process.Randolph, G.M. (2010). Measuring the indirect effect: Voter initiatives and legislative production in the American states. Public Finance Review, 38(6), 762-786

    GTOSat: Radiation Belt Dynamics from the Inside

    Get PDF
    GTOSat, a 6U SmallSat integrated and tested at NASA Goddard Space Flight Center (GSFC), has a scheduled launch date of July 31st, 2022, on an Atlas V. From a low inclination geosynchronous transfer orbit (GTO), GTOSat has the primary science goal of advancing our quantitative understanding of acceleration and loss of relativistic electrons in the Earth’s outer radiation belt. It will measure energy spectra and pitch angles of both the seed and the energized electron populations simultaneously using a compact, high-heritage Relativistic Electron Magnetic Spectrometer (REMS) built by The Aerospace Corporation. A boom-mounted Fluxgate Magnetometer (FMAG), developed by NASA GSFC, will provide 3-axis knowledge of the ambient local magnetic field. The spacecraft bus uses a combination of commercial and in-house/custom designed components. Design, integration, and testing of the spacecraft bus was performed by a small, dedicated team at GSFC. Throughout development GTOSat has encountered numerous challenges, expected and unexpected, that we’re ready to share with the community
    corecore