Análise Comparativa do Ângulo de Molhabilidade em uma Liga Livre de Chumbo Sn-2%Sb / Comparative Analysis of the Wetting Angle in a Lead-free Sn-2.0wt%Sb Alloy

Na indústria eletrônica, ligas de solda à base de chumbo (Pb) ainda são bastante usadas na soldagem de componentes de circuito eletrônico, como as do sistema Pb-Sn (Chumbo-Estanho) contendo 85 a 97 % de Pb em peso, sendo muito utilizadas em soldagem de alta temperatura na fabricação de empacotamentos de semicondutores de potência. Essas soldas clássicas estanho-chumbo são inadequadas dos pontos de vista ambiental e de saúde pública em decorrência da toxicidade do chumbo. Há muitas preocupações com o uso do metal tóxico chumbo devido aos seus efeitos adversos na saúde humana e contaminação do meio ambiente. O interesse em aprofundar os conhecimentos da liga Sn-Sb, está relacionado às aplicações para soldagem em altas temperaturas (~230 a 400°C) que ainda são consideradas soldagem de brasagem, com ponto de fusão abaixo de 450°, voltadas para a tecnologia de soldagem escalonada, em que as primeiras camadas depositadas são ligas que fundem a uma maior temperatura e as últimas, em menores temperaturas. O trabalho a seguir apresenta resultados comparativos do ângulo de molhabilidade da liga Sn-2%Sb em relação a liga eutética de chumbo-antimônio, Sn-37%Pb, utilizando-se um método de ensaio customizado, criado dentro do laboratório NPM-GPSOL da Universidade Federal do Pará. Os resultados foram satisfatórios, sendo bem próximos entre as ligas ensaiadas, demonstrando um potencial de utilização do sistema como ligas de soldagem livres de chumbo

Effect of the T6 Heat Treatment on Microhardness of a Directionally Solidified Aluminum-Based 319 Alloy

Aluminum alloys of the ANSI series 319 present Si and Cu as the main alloying elements and the mechanical strength of these alloys can be improved by the precipitation of the metastable Al2Cu phase during the ageing heat treatment. In this paper, the Al-5.5wt.%Si-3wt.%Cu alloy was elaborated and solidified in a water-cooled horizontal directional solidification device. The as-cast ingot was subjected to the precipitation hardening heat treatment (T6 heat treatment), which consisted of: solution for 5 h at 490°C±2°C, followed by quenching in water at 60°C±2°C and ageing for 3 h at 155°C±2°C, and cooling-air. Secondary dendrite arm spacing (λ2) measurements were carried out before and after T6 heat treatment. The mechanical strength of the alloy was investigated by the microhardness test. It has been found that the heat treatment did not influence the λ2 values, however, highest HV values have been observed for the heat-treated samples.FAPESPA - Fundação Amazônia de Amparo a Estudos e PesquisasMAGNO, I. A. B.; SOUZA, F. V. A.; BARROS, A. S.;NASCIMENTO, J. M.; ROCHA, O. F. L. Universidade Federa do Par

Solidification thermal parameters and dendritic growth during the horizontal directional solidification of Al-7wt.%Si alloy

The main purpose of this work is to investigate the influence of thermal parameters such as growth rate (V L) and cooling rate (T R) on the primary dendrite arm spacings (λ1) during the horizontal transient directional solidification of Al-7wt.%Si hypoeutectic alloy. The primary dendrite spacings were measured along the length of the samples and correlated with these thermal parameters. The variation of dendrite spacings is expressed as a power law function of V L and T R given by the formulas λ1 = 55(V L)-1.1 and λ1 = 212 (T R)-0.55, respectively. A comparative study between the results of this work and those from the literature proposed to investigate these dendrite spacings during the upward and downward vertical directional solidification of Al-7wt.%Si alloy is also conducted. Finally, the experimental data are compared with some predictive dendritic models from the literature

NEOTROPICAL ALIEN MAMMALS: a data set of occurrence and abundance of alien mammals in the Neotropics

Biological invasion is one of the main threats to native biodiversity. For a species to become invasive, it must be voluntarily or involuntarily introduced by humans into a nonnative habitat. Mammals were among first taxa to be introduced worldwide for game, meat, and labor, yet the number of species introduced in the Neotropics remains unknown. In this data set, we make available occurrence and abundance data on mammal species that (1) transposed a geographical barrier and (2) were voluntarily or involuntarily introduced by humans into the Neotropics. Our data set is composed of 73,738 historical and current georeferenced records on alien mammal species of which around 96% correspond to occurrence data on 77 species belonging to eight orders and 26 families. Data cover 26 continental countries in the Neotropics, ranging from Mexico and its frontier regions (southern Florida and coastal-central Florida in the southeast United States) to Argentina, Paraguay, Chile, and Uruguay, and the 13 countries of Caribbean islands. Our data set also includes neotropical species (e.g., Callithrix sp., Myocastor coypus, Nasua nasua) considered alien in particular areas of Neotropics. The most numerous species in terms of records are from Bos sp. (n = 37,782), Sus scrofa (n = 6,730), and Canis familiaris (n = 10,084); 17 species were represented by only one record (e.g., Syncerus caffer, Cervus timorensis, Cervus unicolor, Canis latrans). Primates have the highest number of species in the data set (n = 20 species), partly because of uncertainties regarding taxonomic identification of the genera Callithrix, which includes the species Callithrix aurita, Callithrix flaviceps, Callithrix geoffroyi, Callithrix jacchus, Callithrix kuhlii, Callithrix penicillata, and their hybrids. This unique data set will be a valuable source of information on invasion risk assessments, biodiversity redistribution and conservation-related research. There are no copyright restrictions. Please cite this data paper when using the data in publications. We also request that researchers and teachers inform us on how they are using the data

Brazilian Flora 2020: Leveraging the power of a collaborative scientific network

International audienceThe shortage of reliable primary taxonomic data limits the description of biological taxa and the understanding of biodiversity patterns and processes, complicating biogeographical, ecological, and evolutionary studies. This deficit creates a significant taxonomic impediment to biodiversity research and conservation planning. The taxonomic impediment and the biodiversity crisis are widely recognized, highlighting the urgent need for reliable taxonomic data. Over the past decade, numerous countries worldwide have devoted considerable effort to Target 1 of the Global Strategy for Plant Conservation (GSPC), which called for the preparation of a working list of all known plant species by 2010 and an online world Flora by 2020. Brazil is a megadiverse country, home to more of the world's known plant species than any other country. Despite that, Flora Brasiliensis, concluded in 1906, was the last comprehensive treatment of the Brazilian flora. The lack of accurate estimates of the number of species of algae, fungi, and plants occurring in Brazil contributes to the prevailing taxonomic impediment and delays progress towards the GSPC targets. Over the past 12 years, a legion of taxonomists motivated to meet Target 1 of the GSPC, worked together to gather and integrate knowledge on the algal, plant, and fungal diversity of Brazil. Overall, a team of about 980 taxonomists joined efforts in a highly collaborative project that used cybertaxonomy to prepare an updated Flora of Brazil, showing the power of scientific collaboration to reach ambitious goals. This paper presents an overview of the Brazilian Flora 2020 and provides taxonomic and spatial updates on the algae, fungi, and plants found in one of the world's most biodiverse countries. We further identify collection gaps and summarize future goals that extend beyond 2020. Our results show that Brazil is home to 46,975 native species of algae, fungi, and plants, of which 19,669 are endemic to the country. The data compiled to date suggests that the Atlantic Rainforest might be the most diverse Brazilian domain for all plant groups except gymnosperms, which are most diverse in the Amazon. However, scientific knowledge of Brazilian diversity is still unequally distributed, with the Atlantic Rainforest and the Cerrado being the most intensively sampled and studied biomes in the country. In times of “scientific reductionism”, with botanical and mycological sciences suffering pervasive depreciation in recent decades, the first online Flora of Brazil 2020 significantly enhanced the quality and quantity of taxonomic data available for algae, fungi, and plants from Brazil. This project also made all the information freely available online, providing a firm foundation for future research and for the management, conservation, and sustainable use of the Brazilian funga and flora