3,999 research outputs found
General Knowledge and Attitudes about Safety and Emergency Evacuation: The Case of a Higher Education Institution
The implementation of a safety culture and awareness of emergency issues in buildings has been growing in more developed societies. It is essential that all occupants know how to act in an emergency situation, particularly during an emergency evacuation. In higher education institutions (HEIs), which annually host not only their many employees, but also national and international students, it is essential to know and understand the knowledge, attitudes, and behaviors that the academic community demonstrates in this matter. This study aimed to characterize the perception of occupants regarding safety, specifically in the emergency evacuation phase, within the academic community of an HEI. In this observational cross-sectional study, data on general knowledge and attitudes regarding safety and actions during emergency situations were collected through an anonymous questionnaire targeting students, faculty, and non-teaching staff, which was sent via institutional email. Valid responses were received from 392 participants and then scored and assessed on different domains. The results obtained showed that, despite a reasonable average regarding the general level of knowledge, attitudes, and behaviors of the occupants on the subject, the community falls somewhat short in terms of training. It is noteworthy that approximately 64% of the sample has never received awareness or training related to emergency evacuation, and around 68% are unaware of the location of their institution’s meeting/gathering point. Finally, by identifying the most common gaps, namely the training dimension, some simple measures could be improved, such as the dissemination of safety instructions accessible through QR codes placed in strategic locations or even conducting small drills during class sessions, as well as learning with simulation concerning different scenarios of emergency.info:eu-repo/semantics/publishedVersio
The impact of structural capital on product innovation performance: an empirical analysis
info:eu-repo/semantics/publishedVersio
Unifying gauge couplings at the string scale
Using the current precision electroweak data, we look for the minimal
particle content which is necessary to add to the standard model in order to
have a complete unification of gauge couplings and gravity at the weakly
coupled heterotic string scale. We find that the addition of a vector-like
fermion at an intermediate scale and a non-standard hypercharge normalization
are in general sufficient to achieve this goal at two-loop level. Requiring the
extra matter scale to be below the TeV scale, it is found that the addition of
three vector-like fermion doublets with a mass around 700 GeV yields a perfect
string-scale unification, provided that the affine levels are , as in the string-GUT. Furthermore,
if supersymmetry is broken at the unification scale, the Higgs mass is
predicted in the range 125 GeV - 170 GeV, depending on the precise values of
the top quark mass and parameter.Comment: 11 pages, 4 eps figures, using jpconf style, talk given at CORFU2005,
RTN meeting ``The Quest for Unification: Theory Confronts Experiment'', 11 -
18 September 2005, Corfu, Greec
Product Innovation and Relational Capital: Evidence From Portugal
At a time when intellectual capital and product innovation management are both considered to be critical for
companies to gain a competitive edge (and even survive) in today’s unstable business environment, this paper discusses the influence of relational capital on product innovation performance at innovative small and medium enterprises (SMEs). Building upon the intellectual capital and new product development perspectives, an empirical research was conducted, using a questionnaire administered to a network of Portuguese innovative SMEs. The findings suggest that relational capital does have a positive effect on product innovation performance. In particular, “Vertical relationships” emerges as the main relational capital element significantly affecting product innovation at the innovative SMEs level. The existence and proactive management of relationships with customers and suppliers emerge as critical factors to product innovation success. We find our results to be useful for both researchers and practitioners: we contribute to the ongoing understanding of relational capital’s impact on critical business phenomena, while also identifying additional critical factors
for new product development success.info:eu-repo/semantics/publishedVersio
Critical elements for product innovation at Portuguese innovative SMEs: an intellectual capital perspective
info:eu-repo/semantics/publishedVersio
Differences in the Prevalence of Non-Communicable Disease between Slum Dwellers and the General Population in a Large Urban Area in Brazil.
Residents of urban slums are at greater risk for disease than their non-slum dwelling urban counterparts. We sought to contrast the prevalences of selected non-communicable diseases (NCDs) between Brazilian adults living in a slum and the general population of the same city, by comparing the age and sex-standardized prevalences of selected NCDs from a 2010 survey in Pau da Lima, Salvador Brazil, with a 2010 national population-based telephone survey. NCD prevalences in both populations were similar for hypertension (23.6% (95% CI 20.9⁻26.4) and 22.9% (21.2⁻24.6), respectively) and for dyslipidemia (22.7% (19.8⁻25.5) and 21.5% (19.7⁻23.4)). Slum residents had higher prevalences of diabetes mellitus (10.1% (7.9⁻12.3)) and of overweight/obesity (46.5% (43.1⁻49.9)), compared to 5.2% (4.2⁻6.1) and 40.6% (38.5⁻42.8) of the general population in Salvador. Fourteen percent (14.5% (12.1⁻17.0)) of slum residents smoked cigarettes compared to 8.3% (7.1⁻9.5) of the general population in Salvador. The national telephone survey underestimated the prevalence of diabetes mellitus, overweight/obesity, and smoking in the slum population, likely in part due to differential sampling inside and outside of slums. Further research and targeted policies are needed to mitigate these inequalities, which could have significant economic and social impacts on slum residents and their communities
Resource‐based view of city quality: Scales development and validation
info:eu-repo/semantics/publishedVersio
Particle characteristics’ influence on FLASH sintering of potassium sodium niobate: A relationship with conduction mechanisms
Funding Information: This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020 & UIDP/50011/2020, financed by national funds through the FCT/MEC and when appropriate, co-financed by FEDER under the PT2020 Partnership Agreement. This work was also financed by Portugal 2020 through European Regional Development Fund (ERDF), in the frame of Operational Competitiveness and Internationalization Programme (POCI), in the scope of the project "FLASH sintering of lead-free functional oxides towards sustainable processing of materials for energy and related applications-FLASH", POCI-01-0247-FEDER-029078. Ricardo Serrazina acknowledges FCT for financial support (SFRH/PD/BD/128411/2017).The considerable decrease in temperature and time makes FLASH sintering a more sustainable alternative for materials processing. FLASH also becomes relevant if volatile elements are part of the material to be processed, as in alkali‐based piezoelectrics like the promising lead‐free K0.5Na0.5NbO3 (KNN). Due to the volatile nature of K and Na, KNN is difficult to process by conventional sintering. Although some studies have been undertaken, much remains to be understood to properly engineer the FLASH sintering process of KNN. In this work, the effect of FLASH temperature, TF, is studied as a function of the particle size and impurity content of KNN powders. Differences are demonstrated: while the particle size and impurity degree markedly influence TF, they do not significantly affect the densification and grain growth processes. The conductivity of KNN FLASH‐sintered ceramics and KNN single crystals (SCs) is compared to elucidate the role of particles’ surface conduction. When particles’ surfaces are not present, as in the case of SCs, the FLASH process requires higher temperatures and conductivity values. These results have implications in understanding FLASH sintering towards a more sustainable processing of lead‐free piezoelectrics.publishersversionpublishe
Variabilidade genética em genótipos de mamoneira (RICINUS COMMUNIS L.) em dois anos de cultivo no recôncavo baiano.
Computational fluid dynamics vs. inverse dynamics methods to determine passive drag in two breaststroke glide positions
Computational fluid dynamics (CFD) plays an important role to quantify, understand and "observe" the water movements around the human body and its effects on drag (D). We aimed to investigate the flow effects around the swimmer and to compare the drag and drag coefficient (CD) values obtained from experiments (using cable velocimetry in a swimming pool) with those of CFD simulations for the two ventral gliding positions assumed during the breaststroke underwater cycle (with shoulders flexed and upper limbs extended above the head-GP1; with shoulders in neutral position and upper limbs extended along the trunk-GP2). Six well-trained breaststroke male swimmers (with reasonable homogeneity of body characteristics) participated in the experimental tests; afterwards a 3D swimmer model was created to fit within the limits of the sample body size profile. The standard k-ε turbulent model was used to simulate the fluid flow around the swimmer model. Velocity ranged from 1.30 to 1.70 m/s for GP1 and 1.10 to 1.50 m/s for GP2. Values found for GP1 and GP2 were lower for CFD than experimental ones. Nevertheless, both CFD and experimental drag/drag coefficient values displayed a tendency to jointly increase/decrease with velocity, except for GP2 CD where CFD and experimental values display opposite tendencies. Results suggest that CFD values obtained by single model approaches should be considered with caution due to small body shape and dimension differences to real swimmers. For better accuracy of CFD studies, realistic individual 3D models of swimmers are required, and specific kinematics respected.info:eu-repo/semantics/publishedVersio
- …