1,480 research outputs found

    A note on the stability of slip channel flows

    Full text link
    We consider the influence of slip boundary conditions on the modal and non-modal stability of pressure-driven channel flows. In accordance with previous results by Gersting (1974) (Phys. Fluids, 17) but in contradiction with the recent investigation of Chu (2004) (C.R. Mecanique, 332), we show that slip increases significantly the value of the critical Reynolds number for linear instability. The non-modal stability analysis however reveals that the slip has a very weak influence on the maximum transient energy growth of perturbations at subcritical Reynolds numbers. Slip boundary conditions are therefore not likely to have a significant effect on the transition to turbulence in channel flows

    A 3D indoor positioning system based on common visible LEDs

    Get PDF
    We propose a realistic 3D positioning system for indoor navigation that exploits visible Light EmittingDiodes (LEDs), placed on the ceiling. A unique frequency tone is assigned to each lamp and modulatesits intensity in periodic time slots. The Time Difference of Arrival (TDOA) is measured without theneed of a synchronization system between the sources and the receiver, then it is used to accuratelyestimate the receiver position. We first describe the theoretical approach, then propose the modeland characterize the possible sources of noise. Finally, we demonstrate the proof-of-concept of theproposed system by simulation of lightwave propagation. Namely, we assess its performance by usingMontecarlo simulations in a common room and estimate the impact of the different implementationparameters on the accuracy of the proposed solution. We find that, in realistic conditions, thetechnique allows for centimeter precision. Pushing the device requirements, the precision can befurther increased to a sub-centimeter accuracy

    Growth and instability of a laminar plume in a strongly stratified environment

    Get PDF
    Experimental studies of laminar plumes descending under gravity into stably stratified environments have shown the existence of a critical injection velocity beyond which the plume exhibits a bifurcation to a coiling instability in three dimensions or a sinuous instability in a Hele-Shaw flow. In addition, flow visualization has shown that, prior to the onset of the instability, a stable base flow is established in which the plume penetrates to a depth significantly smaller than the neutral buoyancy depth. Moreover, the fresh water that is viscously entrained by the plume recirculates within a ā€˜conduitā€™ whose boundary with the background stratification appears sharp. Beyond the bifurcation, the buckling plume takes the form of a travelling wave of varying amplitude, confined within the conduit, which disappears at the penetration depth. To determine the mechanisms underlying these complex phenomena, which take place at a strikingly low Reynolds number but a high Schmidt number, we study here a two-dimensional arrangement, as it is perhaps the simplest system which possesses all the key experimental features. Through a combination of numerical and analytical approaches, a scaling law is found for the plumeā€™s penetration depth within the base flow (i.e. the flow where the instability is either absent or artificially suppressed), and the horizontal cross-stream velocity and concentration profile outside the plume are determined from an asymptotic analysis of a simplified model. Direct numerical simulations show that, with increasing flow rate, a sinuous global mode is destabilized giving rise to the self-sustained oscillations as in the experiment. The sinuous instability is shown to be a consequence of the baroclinic generation of vorticity, due to the strong horizontal gradients at the edge of the conduit, a mechanism that is relevant even at very low Reynolds numbers. Despite the strength of this instability, the penetration depth is not significantly affected by it, instead being determined by the properties of the plume in the vicinity of the source. This scenario is confirmed by a local stability analysis. A finite region of local absolute instability is found near the source for sinuous modes prior to the onset of the global instability. Sufficiently far from the source the flow is locally stable. Near the onset of the global instability, varicose modes are also found to be locally, but only convectively, unstable

    Radio-over-Fiber transmission on single sideband carriers to overcome the dispersion penalties using a injection-locked Fabry-PĆ©rot

    Get PDF

    Modelization and characterization of a CMOS camera as an optical real-time oscilloscope

    Get PDF
    Complementary Metal-Oxide Semiconductor (CMOS) camera sensors are embedded in many consumer electronics products: Thanks to the Rolling Shutter (RS) readout mode, they can detect a time-varying light intensity, which is the key to realize Optical Camera Communication (OCC). To this aim, we introduce here a model describing the camera as a Real-Time Oscilloscope (RTO) detecting optical signals; by means of this approach, we can now characterize the Complementary Metal-Oxide Semiconductor (CMOS) camera by means of parameters that correspond to common oscilloscope specifications, such as the frequency response, the noise, the Signal to Noise Ratio (SNR), the total harmonic distortion (THD), etc.; all of these are introduced and measured in terms of the camera parameters. This approach provides for the first time a set of quantitative tools that should be used to maximize the OCC transmission performance by allowing the optimal selection of the camera settings

    Hypoplastic Left Heart Syndrome

    Get PDF
    Hypoplastic left heart syndrome (HLHS) is a type of congenital heart disease that results in the underdevelopment of the left-sided structures of the heart, including the mitral valve, left ventricle, aortic valve, ascending aorta, and aortic arch. HLHS was first described as a syndrome in 1958 by Nadas and NoonanFontanwho referred to it as combined aortic and mitral atresia.[1] HLHS affects 1 in 5,000 neonates or 3% of all infants born with congenital heart disease.[2][3] Thirty years ago, there were no treatment options for these neonates, and mortality was 100% within the first week of life.[4] Neonates born with HLHS are dependent on a patent ductus arteriosus and an interatrial communication for survival until surgical intervention. A continuous infusion of prostaglandin E1 (PGE1) is needed to maintain ductal patency. Today, several treatment options are available in the prenatal or neonatal period, including the Norwood procedure, hybrid stage 1, heart transplantation, palliative care, and fetal intervention. A series of three palliative surgical operations (Norwood/Hybrid, Hemi-Fontan/Bidirectional Glenn, and Fontan) are typically necessary for survival beyond the neonatal period and infancy. Though rare, a diagnosis of HLHS is responsible for 23% of all cardiac deaths in the first week of life.[1

    The multidimensional prognostic index (MPI) predicts long-term mortality in old type 2 diabetes mellitus patients: a 13-year follow-up study

    Get PDF
    Purpose: The Multidimensional Prognostic Index (MPI) is a tool capable of holistically frame older patients in different settings and affected by different pathologies, establishing a risk of adverse events. Among them, type 2 diabetes mellitus (T2DM), a common metabolic disease in the elderly, is responsible for complications and deaths. Few previous works have focused specifically on MPI and DM, and none have followed up the patients for more than 3 years. The aim of the present study is to analyze MPI accuracy in predicting mortality in a cohort of T2DM patients followed-up for 13 years. Methods: The enrolled subjects were evaluated with MPI, identifying three levels of risk: MPI1 (low risk, 0.0-0.33), MPI2 (moderate risk, 0.34-0.66), and MPI3 (severe risk, 0.67-1.0), and with glycated hemoglobin, and years since T2DM diagnosis. Results: One hundred and seven patients met the inclusion criteria. MPI3 was excluded by further analysis since it was made up of only three patients. Overall, cognitive performances, autonomies in daily living, nutritional status, risk of pressure injuries, comorbidities, and taken drugs were better (pā€‰ā‰¤ā€‰0.0077) in MPI1 than MPI2; moreover, the story of T2DM was shorter (pā€‰=ā€‰0.0026). Cox model showed an overall 13-year survival of 51.9%, and survival rates were significantly smaller in MPI2 (HR: 4.71, pā€‰=ā€‰0.0007). Finally, increased age (HR: 1.15), poorer cognitive abilities (HR: 1.26), vascular (HR: 2.15), and kidney (HR: 2.17) diseases were independently associated with death. Conclusion: Our results prove that MPI predicts short-, mid-, and even long-term mortality in T2DM patients, whose death seems to be related to age and cognitive status, and even more to vascular and kidney diseases

    Chiral symmetry restoration, eigenvalue density of Dirac operator and axial U(1) anomaly at finite temperature

    Get PDF
    We reconsider constraints on the eigenvalue density of the Dirac operator in the chiral symmetric phase of 2 flavor QCD at finite temperature. To avoid possible ultra-violet(UV) divergences, we work on a lattice, employing the overlap Dirac operator, which ensures the exact "chiral" symmetry at finite lattice spacings. Studying multi-point correlation functions in various channels and taking their thermodynamical limit (and then taking the chiral limit), we obtain stronger constraints than those found in the previous studies: both the eigenvalue density at the origin and its first and second derivatives vanish in the chiral limit of 2 flavor QCD. In addition we show that the axial U(1) anomaly becomes invisible in susceptibilities of scalar and pseudo scalar mesons, suggesting that the 2nd order chiral phase transition with the O(4) scaling is not realized in 2 flavor QCD. Possible lattice artifacts when non-chiral lattice Dirac operator is employed are briefly discussed.Comment: 39 pages, 1 figure(2 eps files), a version published in PR

    UHPLC-MS/MS Method for the Analysis of 2,6 Toluene Diisocyanate and 2,4 Toluene Diisocyanate Released from Microa-gglomerated Corks in Wine

    Get PDF
    Micro-agglomerate corks, made by agglutination of cork granulate through the addition of different adhesives, represent an important slice of the market of cork stoppers. Binder glues which are polyurethane- or butadiene-based have been used since they have strong agglomerating effect. Unfortunately, polyurethane-based glues can have isocyanide end group compounds which can migrate into the wine. 2,4-toluene diisocyanate (2,4-TDI) and 2,6 toluene diisocyanate (2,6-TDI), can be found in adhesive and could migrate into wine. A simple ultrahigh-performance liquid chromatography-mass spectrometry (UHPLC-MS/MS) method for the determination of these active ingredients (a.is.) in wine has been developed. The method has been validated under Eurachem CITAC guidelines (Cooperation on International Traceability in Analytical Chemistry). Instrument limit of detection (LOD) and to a limit of quantification (LOQ) for 2,6 TDI and 2,4 TDI were 0.42 and 0.39 Ī¼g/L, and 1.72 and 1.57 Ī¼g/L, respectively. Four different solvents applied for recoveries showed quite different rates ranging for 2,6 TDI and 2,4 TDI from 17.96 to 88.53 %, and 40.08 to 99.18 %, respectively. Real sample analysis showed low residue levels, especially of 2,6 TDI, with values always below the LOQ. The data reported on real samples allowed to establish that from a risk management purpose, no toxicology risk can be accomplished

    UHPLC-MS/MS Method for the Analysis of 2,6 Toluene Diisocyanate and 2,4 Toluene Diisocyanate Released from Microa-gglomerated Corks in Wine

    Get PDF
    AbstractMicro-agglomerate corks, made by agglutination of cork granulate through the addition of different adhesives, represent an important slice of the market of cork stoppers. Binder glues which are polyurethane- or butadiene-based have been used since they have strong agglomerating effect. Unfortunately, polyurethane-based glues can have isocyanide end group compounds which can migrate into the wine. 2,4-toluene diisocyanate (2,4-TDI) and 2,6 toluene diisocyanate (2,6-TDI), can be found in adhesive and could migrate into wine. A simple ultrahigh-performance liquid chromatography-mass spectrometry (UHPLC-MS/MS) method for the determination of these active ingredients (a.is.) in wine has been developed. The method has been validated under Eurachem CITAC guidelines (Cooperation on International Traceability in Analytical Chemistry). Instrument limit of detection (LOD) and to a limit of quantification (LOQ) for 2,6 TDI and 2,4 TDI were 0.42 and 0.39 Ī¼g/L, and 1.72 and 1.57 Ī¼g/L, respectively. Four different solvents applied for recoveries showed quite different rates ranging for 2,6 TDI and 2,4 TDI from 17.96 to 88.53 %, and 40.08 to 99.18 %, respectively. Real sample analysis showed low residue levels, especially of 2,6 TDI, with values always below the LOQ. The data reported on real samples allowed to establish that from a risk management purpose, no toxicology risk can be accomplished
    • ā€¦
    corecore