26 research outputs found

    Corrosion resistance of a water-borne resin doped with graphene derivatives applied on galvanized steel

    Get PDF
    Financiado para publicaciĂłn en acceso aberto: Universidade de Vigo/CISUGThe present work reports the effect of adding Graphene Oxide (GO) and reduced Graphene Oxide (rGO) in the corrosion protection provided by a water-borne resin applied on a galvanized steel substrate. Three concentrations, 0.05, 0.1 and 0.15 (all wt%) were tested. The results were markedly affected not only by the concentration of particles but also by their nature. Although the zeta potential values suggested good dispersibility of the particles in the resin, certain aggregation was observed, mainly in rGO 0.1 wt% and rGO 0.15 wt% formulations. The electrochemical impedance spectroscopy (EIS) technique characterised the free films' transport properties. The results suggested that the aggregation strongly influenced the film morphology. The rGO 0.1 wt% and rGO 0.15 wt% formulations exhibited percolating pores that facilitated the electrolyte uptake through the films. The EIS technique was also used to study the protective performance of the films when applied to the metallic substrate. The results confirmed the harmful effect of the particle's aggregation. The results were interesting for the rGO 0.05 wt% system, which displayed long-lasting protection properties. This performance was explained considering its good barrier properties and the zinc surface passivation by the generation of zincite, ZnO

    Electrochemical characterization of a Fe-based shape memory alloy in an alkaline medium and the behaviour in aggressive conditions

    Get PDF
    A Fe-17Mn-6Si-19Cr-4Ni-1(V,C) shape memory steel (SMS) was characterised electrochemically in its unstrained and pre-strained conditions. The work focused on analysing the passive films generated in alkaline conditions, and on the behaviour of those passive samples in various Cl /OH ratios. The passive films were developed by cyclic voltammetry and their characterisation was performed by electrochemical impedance spectroscopy (EIS) and X-ray photoelectron spectroscopy (XPS); these tests were also carried out in 304 L stainless steel specimens for comparison purposes. The results indicated that the film characteristics (thickness and composition) were similar in all the samples, although higher corrosion resistance was observed in the 304 L due to the higher Cr content. In addition, the behaviour of the passive samples in aggressive conditions was assessed by potentiodynamic measurements. The results stated that the shape memory steels were more sensitive than the stainless steel to the aggressive conditions, especially when the alloy was pre-strained. It was also observed that the SMS exhibited a characteristic corrosion morphology localized at the grain boundariesAgencia Estatal de InvestigaciĂłn | Ref. TED2021-130605B-I00Financiado para publicaciĂłn en acceso aberto: Universidade de Vigo/CISU

    Plasma lipid profiles discriminate bacterial from viral infection in febrile children

    Get PDF
    Fever is the most common reason that children present to Emergency Departments. Clinical signs and symptoms suggestive of bacterial infection are often non-specific, and there is no definitive test for the accurate diagnosis of infection. The 'omics' approaches to identifying biomarkers from the host-response to bacterial infection are promising. In this study, lipidomic analysis was carried out with plasma samples obtained from febrile children with confirmed bacterial infection (n = 20) and confirmed viral infection (n = 20). We show for the first time that bacterial and viral infection produces distinct profile in the host lipidome. Some species of glycerophosphoinositol, sphingomyelin, lysophosphatidylcholine and cholesterol sulfate were higher in the confirmed virus infected group, while some species of fatty acids, glycerophosphocholine, glycerophosphoserine, lactosylceramide and bilirubin were lower in the confirmed virus infected group when compared with confirmed bacterial infected group. A combination of three lipids achieved an area under the receiver operating characteristic (ROC) curve of 0.911 (95% CI 0.81 to 0.98). This pilot study demonstrates the potential of metabolic biomarkers to assist clinicians in distinguishing bacterial from viral infection in febrile children, to facilitate effective clinical management and to the limit inappropriate use of antibiotics

    Plasma lipid profiles discriminate bacterial from viral infection in febrile children

    Get PDF
    Fever is the most common reason that children present to Emergency Departments. Clinical signs and symptoms suggestive of bacterial infection are often non-specific, and there is no definitive test for the accurate diagnosis of infection. The 'omics' approaches to identifying biomarkers from the host-response to bacterial infection are promising. In this study, lipidomic analysis was carried out with plasma samples obtained from febrile children with confirmed bacterial infection (n = 20) and confirmed viral infection (n = 20). We show for the first time that bacterial and viral infection produces distinct profile in the host lipidome. Some species of glycerophosphoinositol, sphingomyelin, lysophosphatidylcholine and cholesterol sulfate were higher in the confirmed virus infected group, while some species of fatty acids, glycerophosphocholine, glycerophosphoserine, lactosylceramide and bilirubin were lower in the confirmed virus infected group when compared with confirmed bacterial infected group. A combination of three lipids achieved an area under the receiver operating characteristic (ROC) curve of 0.911 (95% CI 0.81 to 0.98). This pilot study demonstrates the potential of metabolic biomarkers to assist clinicians in distinguishing bacterial from viral infection in febrile children, to facilitate effective clinical management and to the limit inappropriate use of antibiotics

    Spare parts made by additive manufacturing to improve preventive maintenance

    No full text
    This research work is aimed at identifying the applicability of additive manufacturing (AM) to spare parts in the automotive manufacturing industry, specifically in the field of preventive maintenance. A procedure of AM applicability to preventive maintenance is presented. To this end, the results of the application of a case that has been carried out in the Stellantis factory located in the Vigo (Spain) area have been obtained. The procedure was based on an initial inventory from which a series of lists have been obtained that were later categorised. This was performed in order to know the technical and economic applicability of polymeric spare parts replacement by parts made of AM in polyamide material (PA12) through two manufacturing methods (HP Multi-Jet and Selective Laser Sintering technology, SLS). Original spare parts were characterised and compared with replacement parts made in AM. This article provides observations, recommendations and conclusions to summarise the situation regarding the use of AM techniques to improve preventive maintenance.South Mediterranean Tunisian Maintenance Centre of Excellence | Ref. 618718-EPP-1-2020-TN-EPPKA2-CBHE-JPAlgerian National Laboratory for Maintenance Education | Ref. 586035-EPP- 1-2017-1-DZ-EPPKA2-CBHE-J

    Home Palliative Care for Patients with Advanced Chronic Kidney Disease: Preliminary Results

    No full text
    Healthcare for patients with advanced chronic kidney disease (ACKD) on conservative treatment very often poses healthcare problems that are difficult to solve. At the end of 2011, we began a program based on the care and monitoring of these patients by Primary Care Teams. ACKD patients who opted for conservative treatment were offered the chance to be cared for mainly at home by the Primary Care doctor and nurse, under the coordination of the Palliative Care Unit and the Nephrology Department. During 2012, 2013, and 2014, 76 patients received treatment in this program (mean age: 81 years; mean Charlson age-comorbidity index: 10, and mean glomerular filtration rate: 12.4 mL/min/1.73 m2). The median patient follow-up time (until death or until 31 December 2014) was 165 days. During this period, 51% of patients did not have to visit the hospital’s emergency department and 58% did not require hospitalization. Forty-eight of the 76 patients died after a median time of 135 days in the program; 24 (50%) died at home. Our experience indicates that with the support of the Palliative Care Unit and the Nephrology Department, ACKD patients who are not dialysis candidates may be monitored at home by Primary Care Teams

    The risk of COVID-19 death is much greater and age dependent with type I IFN autoantibodies

    No full text
    International audienceSignificance There is growing evidence that preexisting autoantibodies neutralizing type I interferons (IFNs) are strong determinants of life-threatening COVID-19 pneumonia. It is important to estimate their quantitative impact on COVID-19 mortality upon SARS-CoV-2 infection, by age and sex, as both the prevalence of these autoantibodies and the risk of COVID-19 death increase with age and are higher in men. Using an unvaccinated sample of 1,261 deceased patients and 34,159 individuals from the general population, we found that autoantibodies against type I IFNs strongly increased the SARS-CoV-2 infection fatality rate at all ages, in both men and women. Autoantibodies against type I IFNs are strong and common predictors of life-threatening COVID-19. Testing for these autoantibodies should be considered in the general population

    The risk of COVID-19 death is much greater and age dependent with type I IFN autoantibodies

    No full text
    International audienceSignificance There is growing evidence that preexisting autoantibodies neutralizing type I interferons (IFNs) are strong determinants of life-threatening COVID-19 pneumonia. It is important to estimate their quantitative impact on COVID-19 mortality upon SARS-CoV-2 infection, by age and sex, as both the prevalence of these autoantibodies and the risk of COVID-19 death increase with age and are higher in men. Using an unvaccinated sample of 1,261 deceased patients and 34,159 individuals from the general population, we found that autoantibodies against type I IFNs strongly increased the SARS-CoV-2 infection fatality rate at all ages, in both men and women. Autoantibodies against type I IFNs are strong and common predictors of life-threatening COVID-19. Testing for these autoantibodies should be considered in the general population
    corecore