Review of Sex Scandal, The Private Parts of Victorian Fiction

I feel I should begin with a warning: \u27this review contains material which some readers may find offensive\u27. I apologize, but it is not my fault. The book centres on the relation between sex scandals and literature. Cohen believes that Victorian England was a \u27culture of scandal\u27 - a culture in which we still live - in which people were preoccupied with sexual behaviour but at the same time unable to admit it. Sex was simultaneously fascinating and unspeakable. The result was the evolution of a sort of doublethink or linguistic code, through which sexual matters could be at once discussed and disclaimed. He examines two farnous Victorian scandals - the Boulton and Park trial, in which two young homosexuals were prosecuted for transvestism and sodomy, and the Oscar Wilde case. He is able to show that in both the combination of prurient interest and puritanical prudery led to a coded language which enabled the public to read between the lines and understand what was going on while pretending not to. He relates this ambivalent (and hypocritical) attitude to two sex scandals in fiction, those of Maggie Tulliver in The Mill on the Floss (she is innocent but public opinion condemns her without anything being clearly expressed) and of Lizzie Eustace in Trollope\u27s The Eustace Diamonds (where the heroine is not innocent). But what really interests Cohen is the light this sheds on Victorian fiction in general. Is it possible to find coded references to sexual practices (especially aberrant sexual practices) in works which have so far been taken to be about quite other matters? Indeed, it is. And here Mr. Cohen, the bit between his teeth, leaps over the top and is soon deep in a quagmire fighting for his life. Sex, it turns out, is absolutely everywhere. \u27One of the nineteenth- century novel\u27s principal accomplishments is to formulate a literary language that expresses eroticism even as it designates sexuality the supremely unmentionable subject\u27 (italics mine)

Nucleation of vacuum phase transitions by topological defects

The Euclidean action is calculated in the thin-wall approximation for a first-order vacuum phase transition in which the bubble appears symmetrically around either a global monopole or a gauge cosmic string. The bubble is assumed to be much larger than the core size of the monopole or string. In both cases the value of the Euclidean action is shown to be reduced below the $O(4)$ symmetric action value, indicating that the topological defects act as effective nucleation sites for vacuum decay.Comment: 10 pages, LaTe

The eruptive history and magmatic evolution of Aluto volcano: new insights into silicic peralkaline volcanism in the Ethiopian rift

The silicic peralkaline volcanoes of the East African Rift are some of the least studied volcanoes on Earth. Here we bring together new constraints from fieldwork, remote sensing, geochronology and geochemistry to present the first detailed account of the eruptive history of Aluto, a restless silicic volcano located in a densely populated section of the Main Ethiopian Rift. Prior to the growth of the Aluto volcanic complex (before 500 ka) the region was characterized by a significant period of fault development and mafic fissure eruptions. The earliest volcanism at Aluto built up a trachytic complex over 8 km in diameter. Aluto then underwent large-volume ignimbrite eruptions at 316 ± 19 ka and 306 ± 12 ka developing a ~ 42 km2 collapse structure. After a hiatus of ~ 250 ka, a phase of post-caldera volcanism initiated at 55 ± 19 ka and the most recent eruption of Aluto has a radiocarbon age of 0.40 ± 0.05 cal. ka BP. During this post-caldera phase highly-evolved peralkaline rhyolite lavas, ignimbrites and pumice fall deposits have erupted from vents across the complex. Geochemical modelling is consistent with rhyolite genesis from protracted fractionation (> 80%) of basalt that is compositionally similar to rift-related basalts found east of the complex. Based on the style and volume of recent eruptions we suggest that silicic eruptions occur at an average rate of 1 per 1000 years, and that future eruptions of Aluto will involve explosive emplacement of localised pumice cones and effusive obsidian coulees of volumes in the range 1–100 × 106 m3

Miniature High-Force, Long-Stroke SMA Linear Actuators

Improved long-stroke shape-memory-alloy (SMA) linear actuators are being developed to exert significantly higher forces and operate at higher activation temperatures than do prior SMA actuators. In these actuators, long linear strokes are achieved through the principle of displacement multiplication, according to which there are multiple stages, each intermediate stage being connected by straight SMA wire segments to the next stage so that relative motions of stages are additive toward the final stage, which is the output stage. Prior SMA actuators typically include polymer housings or shells, steel or aluminum stages, and polymer pads between successive stages of displacement-multiplication assemblies. Typical output forces of prior SMA actuators range from 10 to 20 N, and typical strokes range from 0.5 to 1.5 cm. An important disadvantage of prior SMA wire actuators is relatively low cycle speed, which is related to actuation temperature as follows: The SMA wires in prior SMA actuators are typically made of a durable nickel/titanium alloy that has a shape-memory activation temperature of 80 C. An SMA wire can be heated quickly from below to above its activation temperature to obtain a stroke in one direction, but must then be allowed to cool to somewhat below its activation temperature (typically, less than or equal to 60 C in the case of an activation temperature of 80 C) to obtain a stroke in the opposite direction (return stroke). At typical ambient temperatures, cooling times are of the order of several seconds. Cooling times thus limit cycle speeds. Wires made of SMA alloys having significantly higher activation temperatures [denoted ultra-high-temperature (UHT) SMA alloys] cool to the required lower return-stroke temperatures more rapidly, making it possible to increase cycle speeds. The present development is motivated by a need, in some applications (especially aeronautical and space-flight applications) for SMA actuators that exert higher forces, operate at greater cycle speeds, and have stronger housings that can withstand greater externally applied forces and impacts. The main novel features of the improved SMA actuators are the following: 1) The ends of the wires are anchored in compact crimps made from short steel tubes. Each wire end is inserted in a tube, the tube is flattened between planar jaws to make the tube grip the wire, the tube is compressed to a slight U-cross-section deformation to strengthen the grip, then the crimp is welded onto one of the actuator stages. The pull strength of a typical crimp is about 125 N -- comparable to the strength of the SMA wire and greater than the typical pull strengths of wire-end anchors in prior SMA actuators. Greater pull strength is one of the keys to achievement of higher actuation force; 2) For greater strength and resistance to impacts, housings are milled from aluminum instead of being made from polymers. Each housing is made from two pieces in a clamshell configuration. The pieces are anodized to reduce sliding friction; 3) Stages are made stronger (to bear greater compression loads without excessive flexing) by making them from steel sheets thicker than those used in prior SMA actuators. The stages contain recessed pockets to accommodate the crimps. Recessing the pockets helps to keep overall dimensions as small as possible; and, 4) UHT SMA wires are used to satisfy the higher-speed/higher-temperature requirement

The isolated muscle fibre as a model of disuse atrophy: characterization using PhAct, a method to quantify f-actin

Research into muscle atrophy and hypertrophy is hampered by limitations of the available experimental models. Interpretation of in vivo experiments is confounded by the complexity of the environment while in vitro models are subject to the marked disparities between cultured myotubes and the mature myofibres of living tissues. Here we develop a method (PhAct) based on ex vivo maintenance of the isolated myofibre as a model of disuse atrophy, using standard microscopy equipment and widely available analysis software, to measure f-actin content per myofibre and per nucleus over two weeks of ex vivo maintenance. We characterize the 35% per week atrophy of the isolated myofibre in terms of early changes in gene expression and investigate the effects on loss of muscle mass of modulatory agents, including Myostatin and Follistatin. By tracing the incorporation of a nucleotide analogue we show that the observed atrophy is not associated with loss or replacement of myonuclei. Such a completely controlled investigation can be conducted with the myofibres of a single muscle. With this novel method we can identify those features and mechanisms of atrophy and hypertrophy that are intrinsic to the muscle fibre from those that include activities of other tissues and systemic agents