The influence of subsurface geology on the distribution of earthquakes during the 2016‐-2017 Central Italy seismic sequence

Abstract In 2016–2017, a destructive sequence of earthquakes affected a wide portion of Central Italy, activating a complex, 80-km long system of SW-dipping normal faults and causing impressive surface faulting and widespread damage. Former studies providing reconstructions of the fault systems activated during this sequence, are mostly based on high-resolution seismological and geodetic data. In this paper, we integrate surface and subsurface geological data with the ones obtained by an irregular network of seismic reflection profiles, aimed at providing a comprehensive reconstruction of the subsurface lithologies and structures in this area. We have constructed a set of five geological cross-sections, passing through the mainshock epicentral areas (Mw > 5.5) of the seismic sequence. The cross-sections are extrapolated down to a depth of ca. 12 km, along which we have plotted relocated seismicity. Combined geological and seismological data support a new 3D seismotectonic model, illustrating the propagation through time and space of the seismic ruptures during the sequence. Our results show that the litho-mechanical stratigraphy exerted a primary control on the distribution of seismicity, as it is mostly hosted in the more competent lithologies (i.e. the Late Triassic-Paleogene succession, consisting of carbonates and evaporites). In addition, we illustrate the crucial role played by the inherited compressional structures in determining the lateral and vertical variations of the rheological properties of the upper crust and, eventually, the overall geometry and segmentation of the seismogenic extensional system. The workflow proposed here can be applied to other seismogenic zones throughout the world, since reliable seismotectonic models require an accurate reconstruction of the subsurface geological setting, based on a close integration of geological, geophysical and seismological data

Analysing product development process and plm features in the food and fashion industries

The food and fashion industries are well-known as areas of excellence representing Italy globally. Their products include innovative features, have short lifecycles and a high level of customisation. Both the pipelines have to respond quickly to unpredictable demand in order to minimize stock-outs, forced markdowns, obsolete inventory and they focus their Supply Chain (SC) strategies on quality and time-to-market. Although they are characterized by many different aspects, both leverage on the same point of strength: their internal Product Development (PD) process. The opposite occurs in the automotive industry, with its standard and functional products and its efficient pipeline centred on cost reduction. Starting from previous works presented during the last PLM conference (PLM16), the research aims at investigating similarities and differences between these sectors, focusing on their PD process and their main critical success factors. Moreover, the authors analyse how Food and Fashion companies are managing the entire set of information throughout PD and the strategic role of Product Lifecycle Management (PLM). In order to reach these goals, a multiple case study analysis has been performed, involving companies belonging to the Food and Fashion industries. The results will be relevant both for academics and practitioners. Indeed, there is a literature gap about this topic, because of the lack of researches concerning Food and Fashion PD. From the practitioners point of view, the results of this work will help Food and Fashion companies to support their business analysing the PD process and to better understand how the use of the PLM system could improve it

Product development kpis: A case study analysis in food and fashion companies

Two of the main industries that are currently paying huge attention to Product Development (PD) are Food & Fashion (F&F). Even if the remaining supply chain processes (production, distribution, sales) are managed in different ways and dissimilar outsourcing policies are adopted, PD is the most valuable process that both the industries are emphasizing. In the Italian context, F&F also represent two of the three excellences of the Made in Italy (Furniture is the third element), also known as "3F". Therefore, this research constitutes a progress of a previous work, which has examined critical success factors, PD features and PLM functionalities in the two sectors. The aim of this study is to analyse how to control, to monitor and to enhance PD through Key Performance Indicators (KPIs) in F&F companies. From the methodological point of view, case study is adopted as a research strategy, designing two questionnaires with a common structure in order to obtain the required information. Indeed, different companies, belonging to the sectors of interest, have been selected and interviewed. As a result, KPIs are identified and classified. Moreover, a comparison between the previously listed metrics is performed and the drivers affecting similarities and differences are highlighted. This research helps to fill the literature gap, given the few contributions related to product development in the F&F supply chains. It also represents a valuable insight for practitioners who are trying to improve business processes and to increase the control over product development

Extracellular serine empowers epidermal proliferation and psoriasis-like symptoms

The contribution of nutrient availability to control epidermal cell proliferation, inflammation, and hyperproliferative diseases remains unknown. Here, we studied extracellular serine and serine/glycine metabolism using human keratinocytes, human skin biopsies, and a mouse model of psoriasis-like disease. We focused on a metabolic enzyme, serine hydroxymethyltransferase (SHMT), that converts serine into glycine and tetrahydrofolate-bound one‑carbon units to support cell growth. We found that keratinocytes are both serine and glycine auxotrophs. Metabolomic profiling and hypoxanthine supplementation indicated that SHMT silencing/inhibition reduced cell growth through purine depletion, leading to nucleotide loss. In addition, topical application of an SHMT inhibitor suppressed both keratinocyte proliferation and inflammation in the imiquimod model and resulted in a decrease in psoriasis-associated gene expression. In conclusion, our study highlights SHMT2 activity and serine/glycine availability as an important metabolic hub controlling both keratinocyte proliferation and inflammatory cell expansion in psoriasis and holds promise for additional approaches to treat skin diseases

In vivo Study of the Layered Structure on the Abdomen by Broadband Time-Domain Diffuse Optical Spectroscopy

We investigate the effect of depth heterogeneity in the abdomen by multidistance time-domain diffuse optical spectroscopy on 4 volunteers finding a higher water content in shallower regions, possibly due to fat heterogeneity and/or dermis contributions

Biological evaluation of crude and degummed oil from Moringa oleifera seeds.

The aim of this work was to evaluate the oil extracted from Moringa oleifera (fam. Moringaceae) seeds from the nutritional standpoint. Nutritional evaluation of crude or degummed moringa oil or soybean oil (as a control) involved the determination of the Food Efficiency (FE) in male Fisher rats and the fatty acid composition of the moringa oil. Hepatic and renal functions were assessed by measuring serum transaminases activity and urea and creatinine concentrations, respectively. Serum cholesterol and triglycerides, alkaline phosphatase, total proteins and albumine were also measured. Results showed that FE was slightly increased by the crude moringa oil while no differences were found between the soybean and degummed moringa oil regarding this parameter. Renal or hepatic injures as well as major alterations in serum proteins were not induced by the tested oils. These results suggested that degummed M. oleifera oil possessed adequate biological quality as compared to the crude oil

Non-invAsive VentIlation for early General wArd respiraTory failurE (NAVIGATE):A multicenter randomized controlled study. Protocol and statistical analysis plan

Few randomized trials have evaluated the use of non-invasive ventilation (NIV) for early acute respiratory failure (ARF) in non-intensive care unit (ICU) wards. The aim of this study is to test the hypothesis that early NIV for mild-moderate ARF in non-ICU wards can prevent development of severe ARF

Bovine Leukosis Virus and Antibodies against Bovine Herpesvirus Type-1 and Bovine Viral Diarrhea Virus and in Buffaloes of the State of Pará, Brazil

Background: Viral diseases affecting reproduction cause economic losses in cattle, as reproductive failure interrupts the production cycle, thus reducing herd productivity. Buffaloes are susceptible to most of the diseases that affect cattle. Some of the viral diseases of reproductive importance are infectious bovine rhinotracheitis (IBR), bovine viral diarrhea (BVD), and bovine leukosis (BL). The objective of this study was to determine the seroprevalence of IBR virus (bovine herpes virus-1, BoHV-1), BVD virus (BVDV), and BL virus (BLV) in female buffaloes living in wetland areas or plains in the state of Pará, as well as the seroprevalence of BoHV-1, BVDV, and BLV in females of different age groups.Materials, Methods & Results: It were used 225 crossbred buffaloes from 4 buffalo exclusive farms. The buffaloes reared on farms A (n = 50) and B (n = 89) were kept in wetland areas on Marajó Island (n = 139), Pará. On farms C (n = 30) and D (n = 56) buffaloes were kept in plains (n = 86) in a northeastern mesoregion of Para. Animals were categorized into age groups: I: 0-3 years (n = 34), II: 3-6 years (n = 58), III: 7-9 years (n = 55), and IV: over 9 years (n = 78). Blood samples were collected and sera were sent for processing at the Bovine Virus Laboratory, Biological Institute of São Paulo, Brazil. The presence of IBRV and BVDV was determined by neutralization and BLV antibodies by immunodiffusion in agar gel. Statistical analysis was performed using the Ȥ2 test at a significance level of 5%. Among the seroprevalences of IBRV, BVDV and BLV antibodies, the difference in prevalence for BVD [P < 0.01] was observed between wetland areas and plains of Para, varying from 12.4% to 96.0% and 0.0% to 13.3%, respectively. While levels of IBRV remained high on farms A (79.6%), B (86.5%), C (83.3%) and D (89.1%) [P = 0.60] and BLV was negative in all the animals. BVDV was similar for all the age groups [P = 0.60], while IBRV was more prevalent in animals over 6 years of age with group I: (76.5%), II (74.5%), III (92.3%) and IV (91.3%) [P = 0.01]. It was not possible verify the influence of age in prevalence for BL.Discussion: The prevalence obtained for the BoHV-1 on farms was high, with little variation between 79.6% and 89.1%. The high prevalence of BoHV-1 suggests the free circulation of the virus in the state of Para. Notably, the animals in this study had not been vaccinated, so the determined viral antibody titers were independent of vaccination. BVDV results showed high variation between 0.0% and 96.0%. The highest prevalence in wetland areas may be related to the breeding environment, because of a possible horizontal contamination. The lack of BLV antibodies prevalence can be attributed to the fact that all the evaluated animals were kept in an extensive breeding system where they had little direct contact. The prevalence of IBR was higher in the older animals. Variation in prevalence with age was not observed for BVD. It was concluded that the prevalence for IBR and BVD were high indicating that the etiological agents are circulating in Para, with IBR having a higher prevalence in older animals. Breeding buffalo in wetland areas may favor horizontal transmission of BVDV because facilitate contact of healthy animals with water contaminated by virus carriers animal secretion and the absence of seropositive animals at the BLV does not necessarily indicate that buffaloes are resistant to the virus

A Systematic Review and International Web-Based Survey of Randomized Controlled Trials in the Perioperative and Critical Care Setting: Interventions Reducing Mortality

The authors aimed to identify interventions documented by randomized controlled trials (RCTs) that reduce mortality in adult critically ill and perioperative patients, followed by a survey of clinicians’ opinions and routine practices to understand the clinicians’ response to such evidence. The authors performed a comprehensive literature review to identify all topics reported to reduce mortality in perioperative and critical care settings according to at least 2 RCTs or to a multicenter RCT or to a single-center RCT plus guidelines. The authors generated position statements that were voted on online by physicians worldwide for agreement, use, and willingness to include in international guidelines. From 262 RCT manuscripts reporting mortality differences in the perioperative and critically ill settings, the authors selected 27 drugs, techniques, and strategies (66 RCTs, most frequently published by the New England Journal of Medicine [13 papers], Lancet [7], and Journal of the American Medical Association [5]) with an agreement ≥67% from over 250 physicians (46 countries). Noninvasive ventilation was the intervention supported by the largest number of RCTs (n = 13). The concordance between agreement and use (a positive answer both to “do you agree” and “do you use”) showed differences between Western and other countries and between anesthesiologists and intensive care unit physicians. The authors identified 27 clinical interventions with randomized evidence of survival benefit and strong clinician support in support of their potential life-saving properties in perioperative and critically ill patients with noninvasive ventilation having the highest level of support. However, clinician views appear affected by specialty and geographical location