From anomalous energy diffusion to Levy walks and heat conductivity in one-dimensional systems

The evolution of infinitesimal, localized perturbations is investigated in a one-dimensional diatomic gas of hard-point particles (HPG) and thereby connected to energy diffusion. As a result, a Levy walk description, which was so far invoked to explain anomalous heat conductivity in the context of non-interacting particles is here shown to extend to the general case of truly many-body systems. Our approach does not only provide a firm evidence that energy diffusion is anomalous in the HPG, but proves definitely superior to direct methods for estimating the divergence rate of heat conductivity which turns out to be $0.333\pm 0.004$, in perfect agreement with the dynamical renormalization--group prediction (1/3).Comment: 4 pages, 3 figure

Gender assessment through three-dimensional analysis of maxillary sinuses by means of Cone Beam Computed Tomography

OBJECTIVE: The availability of a low dose radiation technology such as Cone Beam Computed Tomography (CBCT) in dental practice has increased the number of scans available for forensic purposes. Moreover, specific software allows for three-dimensional (3D) characterization of the maxillary sinuses. This study was performed to determine whether sinus maxillary volumes can be useful to identify gender after validating the use of the Dolphin software as a tool for volumetric estimation of maxillary sinus volumes. PATIENTS AND METHODS: The validation was performed by four different operators measuring the volume of six phantoms, where the real volume was already known. The maxillary sinus volumes of 52 patients (26 males and 26 females) mean age 24.3 were calculated and compared between genders and sagittal skeletal class subdivision. The measurements for patients and phantoms were based on CBCT scans (ILUMA™) processed by Dolphin 3D software. RESULTS: No statistical difference was observed between the real volume and the volume measurements performed by the operators. No statistical difference was found in patient's maxillary sinus volumes between gender. CONCLUSIONS: Based on our results, it is not possible to support the use of maxillary sinuses to discern sexual difference in corpse identification

No more time to stay ‘single’ in the detection of Anisakis pegreffii, A. simplex (s. s.) and hybridization events between them: a multi-marker nuclear genotyping approach

A multi-marker nuclear genotyping approach was performed on larval and adult specimens of Anisakis spp. (N = 689) collected from fish and cetaceans in allopatric and sympatric areas of the two species Anisakis pegreffii and Anisakis simplex (s. s.), in order to: (1) identify specimens belonging to the parental taxa by using nuclear markers (allozymes loci) and sequence analysis of a new diagnostic nuclear DNA locus (i.e. partial sequence of the EF1 α−1 nDNA region) and (2) recognize hybrid categories. According to the Bayesian clustering algorithms, based on those markers, most of the individuals (N = 678) were identified as the parental species [i.e. A. pegreffii or A. simplex (s. s.)], whereas a smaller portion (N = 11) were recognized as F1 hybrids. Discordant results were obtained when using the polymerase chain reaction–restriction fragment length polymorphisms (PCR–RFLPs) of the internal transcribed spacer (ITS) ribosomal DNA (rDNA) on the same specimens, which indicated the occurrence of a large number of ‘hybrids’ both in sympatry and allopatry. These findings raise the question of possible misidentification of specimens belonging to the two parental Anisakis and their hybrid categories derived from the application of that single marker (i.e. PCR–RFLPs analysis of the ITS of rDNA). Finally, Bayesian clustering, using allozymes and EF1 α−1 nDNA markers, has demonstrated that hybridization between A. pegreffii and A. simplex (s. s.) is a contemporary phenomenon in sympatric areas, while no introgressive hybridization takes place between the two species

Shoulder-and Back-Muscle Activation During Shoulder Abduction and Flexion Using a Bodyblade Pro Versus Dumbbells

Context: The Bodyblade Pro is used for shoulder rehabilitation after injury. Resistance is provided by blade oscillations—faster oscillations or higher speeds correspond to greater resistance. However, research supporting the Bodyblade Pro’s use is scarce, particularly in comparison with dumbbell training. Objective: To compare muscle activity, using electromyography (EMG), in the back and shoulder regions during shoulder exercises with the Bodyblade Pro vs dumbbells. Design: Randomized crossover study. Setting: San Diego State University biomechanics laboratory. Participants: 11 healthy male subjects age 19–32 y. Intervention: Subjects performed shoulder-flexion and -abduction exercises using a Bodyblade Pro and dumbbells (5, 8, and 10 lb) while EMG recorded activity of the deltoid, pectoralis major, infraspinatus, serratus anterior, and erector spinae. Main Outcome Measures: Average peak muscle activity (% maximum voluntary isometric contraction) was separately measured for shoulder abduction and flexion in the range of 85° to 95°. Differences among exercise devices were separately analyzed for the flexed and abducted positions using 1-way repeated-measures ANOVA. Results: The Bodyblade Pro produced greater muscle activity than all the dumbbell trials. Differences were significant for all muscles measured (all P \u3c .01) except for the erector spinae during shoulder flexion with a 10-lb dumbbell. EMG activity for the Bodyblade Pro exceeded 50% of the MVIC during both shoulder flexion and abduction. For the dumbbell conditions, only the 10-lb trials approached this effect. Conclusions: Using a Bodyblade during shoulder exercises results in greater shoulder- and back-muscle recruitment than dumbbells. The Bodyblade Pro can activate multiple muscles in a single exercise and thereby minimize the need for multiple dumbbell exercises. The Bodyblade Pro is an effective device for shoulder- and back-muscle activation that warrants further use by clinicians interested in its use for rehabilitation

Report 1 PHIN-CARE-JRA2-WP3 Second Task: Pulse Shaping

This report presents the activity developed on laser pulse shaping argument in years 2004-2005 by Milano-INFN within the framework of CARE /JRA2 \Charge production with Photoinjectors" second task \Pulse Shaping". A dedicated laser system with the relative diagnostic tools have been developed. A liquid crystal programmable spatial light modulator(LCP-SLM) shaper have been studied and set for the generation of di®erent waveforms. The shaper is integrated in the laser system for an automatic generation of the target waveforms via the insetion of a computer which drives the system through the developed software. The system can be programmed to generate any target waveform compatible with the spectral bandwidth of the laser system and some exemples are presented. The following issues are treated: (i) the operation stability as function of perturbations of the set-up parameters, (ii) the design of the shaper for the SPARC project, (iii) a new shaper concept for the generation of long target waveforms and (iiii) the rectangular pulse generation at the second harmonic

Digital technology: coming of age?

Editoria

Lithium in the prevention of suicide in mood disorders: updated systematic review and meta-analysis

Objective To assess whether lithium has a specific preventive effect for suicide and self harm in people with unipolar and bipolar mood disorders. Design Systematic review and meta-analysis. Data sources Medline, Embase, CINAHL, PsycINFO, CENTRAL, web based clinical trial registries, major textbooks, authors of important papers and other experts in the discipline, and websites of pharmaceutical companies that manufacture lithium or the comparator drugs (up to January 2013). Inclusion criteria Randomised controlled trials comparing lithium with placebo or active drugs in long term treatment for mood disorders. Review methods Two reviewers assessed studies for inclusion and risk of bias and extracted data. The main outcomes were the number of people who completed suicide, engaged in deliberate self harm, and died from any cause. Results 48 randomised controlled trials (6674 participants, 15 comparisons) were included. Lithium was more effective than placebo in reducing the number of suicides (odds ratio 0.13, 95% confidence interval 0.03 to 0.66) and deaths from any cause (0.38, 0.15 to 0.95). No clear benefits were observed for lithium compared with placebo in preventing deliberate self harm (0.60, 0.27 to 1.32). In unipolar depression, lithium was associated with a reduced risk of suicide (0.36, 0.13 to 0.98) and also the number of total deaths (0.13, 0.02 to 0.76) compared with placebo. When lithium was compared with each active individual treatment a statistically significant difference was found only with carbamazepine for deliberate self harm. Lithium tended to be generally better than the other active comparators, with small statistical variation between the results. Conclusions Lithium is an effective treatment for reducing the risk of suicide in people with mood disorders. Lithium may exert its antisuicidal effects by reducing relapse of mood disorder, but additional mechanisms should also be considered because there is some evidence that lithium decreases aggression and possibly impulsivity, which might be another mechanism mediating the antisuicidal effect

WSN-Based Near Real-Time Environmental Monitoring for Shelf Life Prediction Through Data Processing to Improve Food Safety and Certification

This position paper aims to support a control technique in the perishables goods supply-chain through a combination of near real-time wireless sensor network (WSN) for environmental monitoring and further data processing to predict the shelf life of the product. This approach returns a low cost, versatile and efficient tool that can significantly improve the safety and food certification through the organoleptic qualities control using three different sensors, i.e. temperature, light and humidity. In this article, therefore, the advantages of the proposed technique are explained and a case study is presented to support this approach, as well as an example of processing algorithm for shelf life evaluation