361 research outputs found
Ab-initio calculations of the proton location in topaz-OH, Al2SiO4(OH)2
The position of hydrogen in the structure of topaz-OH was determined by means of ab-initio quantum-mechanic calculations. Static lattice energy calculations predict the existence of four non-equivalent positions of protons, which are characterized by O4-H1... O1, O4-H2... O2, O4-H3... O3 and O4-H4... O4 hydrogen bonds. The distribution of the protons between positions of local equilibrium is controlled by the proton-proton avoidance rule and the strength of the hydrogen bonds. The most favourable configuration of hydrogen atoms is achieved for adjacent protons, which form O4-H3... O3 and O4-H4... O4 hydrogen bonds, respectively. The thermal excitation of atoms at a temperature of 55 K is large enough for the hydrogen atoms occasionally to change their positions to form O4-H1... O1 and O4-H2... O2 bonds. At ambient pressures and higher temperatures the protons are in a dynamic exchange between the allowed positions of local minima. As a consequence, for nearly room-temperature conditions, the dynamic change between different structural configurations leads to the violation of all possible symmetry elements and with that to space group #E5/E5#1. The flipping of the protons between different sites is achieved by simple rotation of the OH-dipole and does not produce any significant distortion of the framework of topaz, whose symmetry remains that of the space group Pbnm. Therefore, no reduction of symmetry has been observed in former X-ray studies on topaz-OH. Calculated IR absorption spectra of topaz-OH were found to be in good agreement with measured spectra. According to the calculations, the two favourable configurations of protons might correspond to the measured peak splitting within the OH-stretching range. An experimentally observed low-frequency band at 3520 cm−1 was assigned to the OH-stretching of the O4-H3... O3 bond, while the band at 3600 cm−1 was attributed to OH-stretching of the O4-H4... O4 hydrogen bond. The broad peak in FAR-IR frequency range at 100-150 cm−1 is attributed to the stretching of H3... O3 and H4... O4 contacts. The rate of proton exchange at 670 K among different sites was estimated by ab-inito molecular dynamic simulations. The calculations predict that flipping of adjacent protons between O4-H3... O3 and O4-H4... O4 bonds at 670 K occur at a rate of about 1.96 TH
Classification of perovskite structural types with dynamical octahedral tilting.
Perovskites ABX3 with delocalized positions of the X atoms represent a distinct class of dynamically distorted structures with peculiar structural relations and physical properties. The delocalization originates from atoms crossing shallow barriers of the potential energy surface. Quantum mechanically, they can be treated similar to light atoms in diffusive states. Many of these perovskite structures are widely used functional materials thanks to their particular physical properties, such as superconductivity, ferroelectricity and photo-activity. A number of these properties are related to static or dynamic motion of octahedral units. Yet, a full understanding of the relationships between perovskite crystal structure, chemical bonding and physical properties is currently missing. Several studies indicate the existence of dynamic disorder generated by anharmonic motion of octahedral units, e.g. in halide perovskite structures. To simplify structural analysis of such systems we derive a set of space groups for simple perovskites ABX3 with dynamical octahedral tilting. The derived space groups extend the well established space group tables for static tiltings by Glazer [Acta Cryst. B (1972). 28, 3384-3392], Aleksandrov [Ferroelectrics (1976). 24, 801-805] and Howard & Stokes [Acta Cryst. B (1998). 54, 782-789]. Ubiquity of dynamical tilting is demonstrated by an analysis of the structural data for perovskites reported in recent scientific publications and the signature of dynamic tilting in the corresponding structures is discussed, which can be summarized as follows: (a) volume increase upon a lowering of temperature, (b) apparent distortion of octahedra (where Jahn-Teller distortions can be ruled out), (c) mismatch between observed instantaneous symmetry and average symmetry, (d) deviation of the experimental space group from the theoretically predicted structures for static tilting, (e) inconsistency of lattice parameters with those suggested by the theory of static tilts, and (f) large displacement parameters for atoms at the X and B sites. Finally, the possible influence of dynamic disorder on the physical properties of halide perovskites is discussed
Role of lone-pair electron localization in temperature-induced phase transitions in mimetite.
The crystal structure of mimetite Pb5(AsO4)3Cl, a phosphate with apatite structure-type has been investigated in situ at 123, 173, 273, 288, 353 and 393 K. A careful inspection of the diffraction pattern and subsequent structure refinements indicated that mimetite transforms from the monoclinic to the hexagonal polymorph with increasing temperature. At 123 K, a monoclinic superstructure, mimetite-2M, with cell parameters a = 20.4487 (9), b = 7.4362 (2), c = 20.4513 (9) Å, β = 119.953 (6)°, V = 2694.5 (2) Å3 and space group P21 was observed. From 173 to 353 K, the reflections of the supercell were evident only along one direction of the corresponding hexagonal apatite-cell and the structure transforms to the polymorph mimetite-M with space group P21/b and unit-cell parameters a = 10.2378 (3), b = 20.4573 (7), c = 7.4457 (2) Å, β = 120.039 (5)°, V = 1349.96 (9) Å3. Only at higher temperature, i.e. 393 K, does mimetite adopt the hexagonal space group P63/m characteristic of apatite structure-types. The role of the electron lone pairs of Pb atoms in the phase transition was investigated through the analysis of the electron localization function (ELF) calculated based on the DFT-geometry optimized structures of the three polymorphs. The changes in spatial distribution of the 6s2 electron density during the phase transitions were explored by means of the Wannier Function Centres (WFCs) derived from ab initio molecular dynamics trajectories. In the high-temperature hexagonal structure the 6s2 electrons are spherically symmetric relative to the position of Pb atoms. At low temperature the maximum of 6s2 electron density is displaced relative to the position of Pb atom contributing to the polar interaction in the monoclinic polymorphs
Sorption and electrokinetic properties of ASR product and C-S-H: A comparative modelling study
Oligoorganogermanes: interplay between aryl and trimethylsilyl substituents
Derivatives of main group elements containing element–element bonds are characterized by unique properties due to -conjugation, which is an attractive subject for investigation. A novel series of digermanes, Ar3Ge-Ge(SiMe3)3, containing aryl (Ar = p-C6H4Me (1), p-C6H4F (2), C6F5 (3)) and trimethylsilyl substituents, was synthesized by the reaction of germyl potassium salt, [(Me3Si)3GeK*THF], with triarylchlorogermanes, Ar3GeCl. The optical and electronic properties of such substituted oligoorganogermanes were investigated spectroscopically by UV/vis absorption spectroscopy and theoretically by DFT calculations. The molecular structures of compounds 1 and 2 were studied by XRD analysis. Conjugation between all structural fragments (Ge-Ge, Ge-Si, Ge-Ar, where Ar is an electron-donating or withdrawing group) was found to affect the properties
Pb2+ uptake by magnesite: The competition between thermodynamic driving force and reaction kinetics
The thermodynamic properties of carbonate minerals suggest a possibility for the use of the abundant materials (e.g., magnesite) for removing harmful divalent heavy metals (e.g., Pb2+). Despite the favourable thermodynamic condition for such transformation, batch experiments performed in this work indicate that the kinetic of the magnesite dissolution at room temperature is very slow. Another set of co‐precipitation experiments from homogenous solution in the Mg‐PbII‐ CO2‐H2O system reveal that the solids formed can be grouped into two categories depending on the Pb/Mg ratio. The atomic ratio Pb/Mg is about 1 and 10 in the Mg‐rich and Pb‐rich phases, respectively. Both phases show a significant enrichment in Pb if compared with the initial stoichiometry of the aqueous solutions (Pb/Mg initial = 1∙10−2–1∙10−4). Finally, the growth of {10.4} magnesite surfaces in the absence and in the presence of Pb2+ was studied by in situ atomic force microscopy (AFM) measurements. In the presence of the foreign ion, a ten‐fold increase in the spreading rate of the obtuse steps was observed. Further, the effect of solution ageing was also tested. We observed the nucleation of a secondary phase that quickly grows on the {10.4} surfaces of magnesite. The preferential incorporation of Pb2+ into the solid phase observed during precipitation and the catalytic effect of Pb2+ on magnesite growth are promising results for the development of environmental remediation processes. These processes, different from the transformation of magnesite into cerussite, are not limited by the slow dissolution rate of magnesite. Precipitation and growth require an external carbon source, thus they could be combined with carbon sequestration techniques
The Effect of pH, Ionic Strength and the Presence of PbII on the Formation of Calcium Carbonate from Homogenous Alkaline Solutions at Room Temperature
Precipitation of calcium carbonates in aqueous systems is an important factor controlling
various industrial, biological, and geological processes. In the first part of this study, the wellknown
titration approach introduced by Gebauer and coworkers in 2008 s used to obtain reliable
experimental dataset for the deep understanding of CaCO3 nucleation kinetics in supersaturated
solutions over a broad range of pH and ionic strength conditions. In the second part, the effect of
impurities, i.e., 1 mol% of Pb2+, was assessed in the same range of experimental conditions. Divalent
lead has been shown to have an inhibitory effect in all ranges of the conditions tested except for
pH 8 and low ionic strength (≤0.15 mol/L). Future investigations might take advantage of the
methodology and the data provided in this work to investigate the effect of other system variables.
The investigation of all the major variables and the assessment of eventual synergic effects could
improve our ability to predict the formation of CaCO3 in complex natural systems
Bis[5-(4-bromophenyl)-4-(tert-butoxycarbonyl)pyrrolidine-2-carboxylato]copper(II) dihydrate
In the title compound, [Cu(C16H19BrNO4)2]·2H2O, the CuII ion resides on an inversion centre and is coordinated by two O and two N atoms from two enantiomeric 5-(4-bromophenyl)-4-(tert-butoxycarbonyl)pyrrolidine-2-carboxylate ligands in a distorted square-planar geometry. The relative stereochemistry of the three stereogenic C atoms in each ligand has been determined. In the crystal, intermolecular N—H⋯O and O—H⋯O hydrogen bonds link the molecules into layers parallel to the bc plane. The crystal studied was twinned by pseudomerohedry with twin fractions of 0.719 (3) and 0.281 (3)
2-[(1RS,3RS,3aRS,6aSR)-5-Benzyl-4,6-dioxo-3-phenyloctahydropyrrolo[3,4-c]pyrrol-1-yl]acetamide
In the title compound, C21H21N3O3, the relative stereochemistry of the four stereogenic C atoms has been determined. The dihedral angle between the phenyl rings is 77.63 (7)°. In the crystal, ribbons spread along the a axis are formed by N—H⋯O hydrogen bonds. C—H⋯π interactions also occur
- …