L3 Experiment

% L3 \\ \\ The detector consists of a large volume low field solenoid magnet, a small central tracking system with very high spatial resolution, a high resolution electromagnetic calorimeter encapsulating the central detector, a hadron calorimeter acting also as a muon filter, and high precision muon tracking chambers. \\ \\The detector is designed to measure energy and position of leptons with the highest obtainable precision allowing a mass resolution $\Delta$m/m smaller than 2\% in dilepton final states. Hadronic energy flux is detected by a fine-grained calorimeter, which also serves as muon filter and tracking device. \\ \\The outer boundary of the detector is given by the iron return-yoke of a conventional magnet, using aluminium plates for the coil. The field is 0.5~T over a length of 12~m. This large volume allows a high precision muon momentum measurement, performed by three sets of drift chambers in the central detector region. From the multiple measurement of the coordinate in the bending plane a momentum resolution of 2.5\% for 45~GeV muons is obtained. A forward-backward muon detection system extends the polar angle coverage to 22 degrees in the forward region. This system is made out of three layers of trapezoidal multi-wire drift chambers for the reconstruction of $\mu$ trajectories, two layers of Resistive Plate Chambers~(RPC) providing a fast $\mu$ trigger, and aluminium coils surrounding the main magnet doors to create a toroidal field which provides additional bending power. \\ \\Going radially inwards, the combined hadron calorimeter and muon absorber consists of wire chambers operating in the proportional mode, sandwiched with U-plates as energy converter. A subdivision into 3000 space elements covering the full solid angle (except the beam pipe) allows localization and determination of the hadronic energy flow with around 11\% energy resolution at the Z pole energy. \\ \\The electromagnetic energy flow is determined by approximately 11000 crystals of BGO \linebreak (Be$_{4}$Ge$_{3}$O _{1} _{2} ), a transparent scintillator with 1.1~cm radiation length. Full electromagnetic shower containment over nearly 4$\pi$ solid angle coverage is achieved. An energy resolution about 1.4\% and a spatial resolution better than 2~mm is obtained for photon energies larger than 1~GeV, with a rejection against hadrons of better than 1000. \\ \\Surrounding the 10~cm diameter beam pipe, a high precision Silicon Microstrip Detector~(SMD) and a small drift chamber operating in the time expansion mode (TEC) act as charged particle vertex detectors. The drift chamber has achieved a space resolution down to 45~$\mu$m. The SMD consists of two layers, each providing readout if the R-$\phi$ and Z coordinates with an intrinsic resolution of about 7~$\mu$m and 15~$\mu$m, respectively. The polar angle of the micro vertex detector extends from 22~degrees to 158 degrees. The combination of TEC and SMD allows a good momentum and charge determination for particles up to 45~GeV, an efficient electron-photon separation and a measurement of the impact parameter of the tracks of long-lived charged particles

ATLAS

% ATLAS \\ \\ ATLAS is a general-purpose experiment for recording proton-proton collisions at LHC. The ATLAS collaboration consists of 144 participating institutions (June 1998) with more than 1750~physicists and engineers (700 from non-Member States). The detector design has been optimized to cover the largest possible range of LHC physics: searches for Higgs bosons and alternative schemes for the spontaneous symmetry-breaking mechanism; searches for supersymmetric particles, new gauge bosons, leptoquarks, and quark and lepton compositeness indicating extensions to the Standard Model and new physics beyond it; studies of the origin of CP violation via high-precision measurements of CP-violating B-decays; high-precision measurements of the third quark family such as the top-quark mass and decay properties, rare decays of B-hadrons, spectroscopy of rare B-hadrons, and $B ^0 _{s}$-mixing. \\ \\The ATLAS dectector, shown in the Figure includes an inner tracking detector inside a 2~T~solenoid providing an axial field, electromagnetic and hadronic calorimeters outside the solenoid and in the forward regions, and barrel and end-cap air-core-toroid muon spectrometers. The precision measurements for photons, electrons, muons and hadrons, and identification of photons, electrons, muons, $\tau$-leptons and b-quark jets are performed over $| \eta |$ < 2.5. The complete hadronic energy measurement extends over $| \eta |$ < 4.7. \\ \\The inner tracking detector consists of straw drift tubes interleaved with transition radiators for robust pattern recognition and electron identification, and several layers of semiconductor strip and pixel detectors providing high-precision space points. \\ \\The e.m. calorimeter is a lead-Liquid Argon sampling calorimeter with an integrated preshower detector and a presampler layer immediately behind the cryostat wall for energy recovery. The end-cap hadronic calorimeters also use Liquid Argon technology, with copper absorber plates. The end-cap cryostats house the e.m., hadronic and forward calorimeters (tungsten-Liquid Argon sampling). The barrel hadronic calorimeter is an iron-scintillating tile sampling calorimeter with longitudinal tile geometry. \\ \\Air-core toroids are used for the muon spectrometer. Eight superconducting coils with warm voussoirs are used in the barrel region complemented with superconducting end-cap toroids in the forward regions. The toroids will be instrumented with Monitored Drift Tubes (Cathode Strip Chambers at large rapidity where there are high radiation levels). The muon trigger and second coordinate measurement for muon tracks are provide

Observation of WWW Production in pp Collisions at √s = 13 TeV with the ATLAS Detector

This Letter reports the observation of W W W production and a measurement of its cross section using 139     fb − 1 of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from W W W production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive W W W production cross section is measured to be 820 ± 100   ( stat ) ± 80   ( syst )     fb , approximately 2.6 standard deviations from the predicted cross section of 511 ± 18     fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy

Observation of WWWWWW Production in pppp Collisions at s\sqrt s =13 TeV with the ATLAS Detector

International audienceThis Letter reports the observation of $WWW$ production and a measurement of its cross section using 139 fb$^{-1}$ of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from $WWW$ production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive $WWW$ production cross section is measured to be $820 \pm 100\,\text{(stat)} \pm 80\,\text{(syst)}$ fb, approximately 2.6 standard deviations from the predicted cross section of $511 \pm 18$ fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy

Observation of WWWWWW Production in pppp Collisions at s\sqrt s =13 TeV with the ATLAS Detector

International audienceThis Letter reports the observation of $WWW$ production and a measurement of its cross section using 139 fb$^{-1}$ of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from $WWW$ production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive $WWW$ production cross section is measured to be $820 \pm 100\,\text{(stat)} \pm 80\,\text{(syst)}$ fb, approximately 2.6 standard deviations from the predicted cross section of $511 \pm 18$ fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy

Observation of WWWWWW Production in pppp Collisions at s\sqrt s =13 TeV with the ATLAS Detector

International audienceThis Letter reports the observation of $WWW$ production and a measurement of its cross section using 139 fb$^{-1}$ of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from $WWW$ production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive $WWW$ production cross section is measured to be $820 \pm 100\,\text{(stat)} \pm 80\,\text{(syst)}$ fb, approximately 2.6 standard deviations from the predicted cross section of $511 \pm 18$ fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy

Observation of WWWWWW Production in pppp Collisions at s\sqrt s =13 TeV with the ATLAS Detector

International audienceThis Letter reports the observation of $WWW$ production and a measurement of its cross section using 139 fb$^{-1}$ of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from $WWW$ production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive $WWW$ production cross section is measured to be $820 \pm 100\,\text{(stat)} \pm 80\,\text{(syst)}$ fb, approximately 2.6 standard deviations from the predicted cross section of $511 \pm 18$ fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy

Observation of WWWWWW Production in pppp Collisions at s\sqrt s =13 TeV with the ATLAS Detector

International audienceThis Letter reports the observation of $WWW$ production and a measurement of its cross section using 139 fb$^{-1}$ of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from $WWW$ production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive $WWW$ production cross section is measured to be $820 \pm 100\,\text{(stat)} \pm 80\,\text{(syst)}$ fb, approximately 2.6 standard deviations from the predicted cross section of $511 \pm 18$ fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy

Observation of WWWWWW Production in pppp Collisions at s\sqrt s =13 TeV with the ATLAS Detector

International audienceThis Letter reports the observation of $WWW$ production and a measurement of its cross section using 139 fb$^{-1}$ of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from $WWW$ production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive $WWW$ production cross section is measured to be $820 \pm 100\,\text{(stat)} \pm 80\,\text{(syst)}$ fb, approximately 2.6 standard deviations from the predicted cross section of $511 \pm 18$ fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy

Observation of WWW Production in pp Collisions at p=13 TeV with the ATLAS Detector ffi s

This Letter reports the observation of WWW production and a measurement of its cross section using 139  fb^{-1} of proton-proton collision data recorded at a center-of-mass energy of 13 TeV by the ATLAS detector at the Large Hadron Collider. Events with two same-sign leptons (electrons or muons) and at least two jets, as well as events with three charged leptons, are selected. A multivariate technique is then used to discriminate between signal and background events. Events from WWW production are observed with a significance of 8.0 standard deviations, where the expectation is 5.4 standard deviations. The inclusive WWW production cross section is measured to be 820±100 (stat)±80 (syst)  fb, approximately 2.6 standard deviations from the predicted cross section of 511±18  fb calculated at next-to-leading-order QCD and leading-order electroweak accuracy