873 research outputs found
Evaluation of Daphnia magna as an indicator of Toxicity and Treatment efficacy of Municipal Sewage Treatment Plant
Performance evaluation of wastewater treatment plants (WWTPs) with special reference to toxicity reduction using Daphnia magna straus as test organism is very important to study the likely adverse effects of thetreated wastewater on the aquatic ecosystem of receiving waters and to detect common environmentally realistic concentrations of pollutants at different concentration levels and toxicity discriminatory ability to distinguish different degree of toxicity and toxic specificity of the compounds on target organisms. This test can be considered asuseful analytical tool for screening of chemical analysis and early warning system to monitor the different operational units of wastewater treatment plants. Interrelationship between COD, SS with respect to Daphnia toxicity (Gd) suggests that improvement of the toxicological quality of wastewater could be linked to the removal of both COD and suspended solids. Both the parameters (COD & SS) can serve as a regulatory tool in lieu of an explicit toxicological standard. An important feature of this work was to emphasize the significance of toxicity tests. It could help to reduceinfluent toxicity and thereby avoid impacting microorganismsâ population in activated sludge systems. This study shows the difference between using physico-chemical and biological criteria to define the quality or toxicity ofwastewater, making it clear that both methods are indispensable and complimentary and support the earlier view that Daphnia magna can serve as a valuable model for bio- monitoring of water pollution and for evaluation of the toxicity of an effluent and risk assessment in an aquatic body, as it is highly sensitive to pollutants
Damage detection on the Z24 bridge by a spectral-based dynamic identification technique
The paper tackles the dynamic identification and the damage detection carried out by a spectral-based method on the well-known Z24 bridge, a three-span pre-stressed concrete bridge located in Switzerland. Before being destroyed, the bridge was progressively damaged and tested in the framework of the Brite Euram project SIMCES. Starting from this benchmark, the presented spectral-based identification technique is validated and the usefulness of this method as a non-destructive tool able to catch the dynamic behavior of a structure and locate the damage is widely discussed. Firstly, a FE model of the bridge was built and calibrated in order to analyze its response to different excitation types (free vibration, triangular pulse, swept sine, shaker and random vibrations) and several damage scenarios. Secondly, aiming at identifying both the modal parameters and the damage of the bridge, the spectral-based method is applied making use of the power spectral matrix decomposition. Finally, a proper index is defined and applied to this case-study in order to locate the damage.(undefined
Recommended from our members
Direct estimation of seismic response in reduced-degree-of-freedom isolation and energy dissipation systems
A methodology for the development of design tools for direct estimation of peak inelastic response in reduced-degree-of-freedom (RDOF) isolation and energy dissipation systems is presented. The suggested procedure is an extension of an earlier method addressing purely hysteretic isolation systems. Herein, the dynamic equation of motion is first normalised to reduce the number of design parameters that significantly affect the response. The sensitivity of normalised response quantities to the amplitude of the ground motion is then investigated through extensive parametric nonlinear dynamic analyses of isolated single-degree-of-freedom (SDOF) systems with linear viscous damping using code-based target spectra. Regression analysis is subsequently employed to develop generalised design equations (GDEs) suitable for design. Further investigations are made to address nonlinear viscous damping and the effect of the transverse component of seismic action in two-degree-of freedom (2DOF) systems under bidirectional excitation, making the procedure applicable to common bridge isolation schemes. GDEs constitute an alternative to equivalent linearisation approaches commonly adopted by codes, informing the selection among alternative isolation and energy dissipations schemes without requiring iterative analysis. The approach is incorporated in the Deformation-Based Design methodology for seismically isolated bridges in a forthcoming paper
Wave reflection and cut-off frequencies in coupled FE-peridynamic grids
International Journal for Numerical Methods in Engineering Published by John Wiley & Sons, Ltd. Reflections are typically observed when pulses propagate across interfaces. Accordingly, spurious reflections might occur at the interfaces between different models used to simulate the same medium. Examples of such coupled models include classical continuum descriptions with molecular dynamics or peridynamic (PD) grids. In this work, three different coupling approaches are implemented to couple bond-based PDs with finite element (FE) solvers for solid mechanics. It is observed that incorporation of an overlapping zone, over which the coupling between FE and PD occurs, can lead to minimization of the reflected energy compared to a standard force coupling at the FE domain/PD grid interface. However, coupling with other existing methodologies, like the addition of ghost particles, achieves comparable accuracy at lower computational cost. Furthermore, the prudent selection of the discretization parameters is of pivotal importance as they control the high frequency cut-off limit. Mismatch between the cut-off frequencies of the different descriptions can lead to unrealistic results
A First-in-Human Study of Novel Cereblon Modulator Avadomide (CC-122) in Advanced Malignancies.
Purpose Avadomide is a novel, small-molecule therapeutic agent that modulates cereblon E3 ligase activity and exhibits potent antitumor and immunomodulatory activities. This first-in-human phase I study (NCT01421524) evaluated the safety and clinical activity of avadomide in patients with advanced solid tumors, non-Hodgkin lymphoma (NHL), and multiple myeloma.Patients and methods Thirty-four patients were treated with avadomide in 7 dose-escalation cohorts using a 3 + 3 design (0.5-3.5 mg, 28-day continuous dosing cycles). The primary objectives were to determine the dose-limiting toxicity (DLT), nontolerated dose (NTD), maximum tolerated dose (MTD), recommended phase II dose, and pharmacokinetics of avadomide. The secondary objective was to determine preliminary avadomide efficacy. Exploratory objectives included evaluation of pharmacodynamic effects of avadomide.Results DLTs were reported in 2 patients, and grade â„3 treatment-emergent adverse events (TEAEs) occurred in 14 patients (41%). The most common TEAEs (â„15%) were fatigue, neutropenia, and diarrhea. The NTD and MTD were 3.5 and 3.0 mg, respectively. Of 5 patients with NHL, 1 achieved a complete response, and 2 had partial responses. Although no objective responses were observed in patients with solid tumors, 5 of 6 patients with brain cancer experienced nonprogression of â„6 months. A dose-dependent relationship between Aiolos degradation in peripheral B and T cells occurred within 5 hours of the first dose of avadomide administered, starting at 0.5 mg.Conclusions Avadomide monotherapy demonstrated acceptable safety and favorable pharmacokinetics in patients with solid tumors, NHL, and multiple myeloma. In addition, 3 objective responses were observed in NHL
Characterisation of road bumps using smartphones
Introduction: Speed bumps are used as the main means of controlling vehicle speeds all over the world. It is not too infrequent, especially in the emerging economies, to have unmarked bumps that can be perilous for the passengers. Fortuitously, the roadways and mobile phone networks have grown simultaneously in emerging economies. This paper demonstrates the capability of smartphones placed inside the vehicles in characterisation of road bumps. The smart mobile phones have accelerometers and position sensors that can be useful for autonomous monitoring roads. This can empower the user community in monitoring of roads. However, the capability of the smartphone in discerning different types of speed bumps while travelling in heterogeneous vehicle types needs to be examined. Methods: A range of road vehicles is mathematically modelled as mass, spring, and damper systems. The mathematical model of the vehicle is excited with parameters analogous to some common speed bumps and its acceleration response is calculated. The accelerometer of a smartphone is validated by comparing it with high precision accelerometers. The acceleration response of the phone while passing over the corresponding road bumps, which was used in the model earlier, is recorded using an Android based application. The experiment is repeated for different classes of vehicles. Filters have been used to reduce noise in the signals. A time averaging technique has been employed to compress the collected data.Results and conclusions: The acceleration signals have been digitally processed to capture road bumps. The importance of using a mathematical model to understand the acceleration response of a vehicle has been established. Also, the use of pass filters to extract the signal of concern from the noisy data has been exhibited. The ability of the technique to discern different types of speed bumps while travelling in a variety of vehicle types has been demonstrated. This investigation demonstrates the potential to automatically monitor the condition of roadways obviating costly manual inspections. As smartphones are ubiquitous, the methodology has the potential to empower the user community in the maintenance of infrastructure
Decolorization of synthetic melanoidins-containing wastewater by a bacterial consortium
The presence of melanoidins in molasses wastewater leads to water pollution both due to its dark brown color and its COD contents. In this study, a bacterial consortium isolated from waterfall sediment was tested for its decolorization. The identification of culturable bacteria by 16S rDNA based approach showed that the consortium composed of Klebsiella oxytoca, Serratia mercescens, Citrobacter sp. and unknown bacterium. In the context of academic study, prevention on the difficulties of providing effluent as well as its variations in compositions, several synthetic media prepared with respect to color and COD contents based on analysis of molasses wastewater, i.e., Viandox sauce (13.5% v/v), caramel (30% w/v), beet molasses wastewater (41.5% v/v) and sugarcane molasses wastewater (20% v/v) were used for decolorization using consortium with color removal 9.5, 1.13, 8.02 and 17.5%, respectively, within 2 days. However, Viandox sauce was retained for further study. The effect of initial pH and Viandox concentration on decolorization and growth of bacterial consortium were further determined. The highest decolorization of 18.3% was achieved at pH 4 after 2 day of incubation. Experiments on fresh or used medium and used or fresh bacterial cells, led to conclusion that the limitation of decolorization was due to nutritional deficiency. The effect of aeration on decolorization was also carried out in 2 L laboratory-scale suspended cell bioreactor. The maximum decolorization was 19.3% with aeration at KLa = 2.5836 h-1 (0.1 vvm)
Seismic behaviour of traditional timber frame walls: experimental results on unreinforced walls
Timber frame buildings are well known as an efficient seismic resistant structure
and they are used worldwide. Moreover, they have been specifically adopted in codes and
regulations during the XVIII and XIX centuries in the Mediterranean area. These structures
generally consist of exterior masonry walls with timber elements embedded which tie the
walls together and internal walls which have a timber frame with masonry infill and act as
shearwalls. In order to preserve these structureswhich characterizemany cities in theworld it
is important to better understand their behaviour under seismic actions. Furthermore, historic
technologies could be used even in modern constructions to build seismic resistant buildings
using more natural materials with lesser costs. Generally, different types of infill could be
applied to timber frame walls depending on the country, among which brick masonry, rubble
masonry, hay and mud. The focus of this paper is to study the seismic behaviour of the walls
considering different types of infill, specifically: masonry infill, lath and plaster and timber
frame with no infill. Static cyclic tests have been performed on unreinforced timber frame
walls in order to study their seismic capacity in terms of strength, stiffness, ductility and
energy dissipation. The tests showed how in the unreinforced condition, the infill is able to
guarantee a greater stiffness, ductility and ultimate capacity of the wall.The authors would like to acknowledge Eng. Filipe Ferreira and A.O.F. (Augusto Oliveira Ferreira &
C Lda.) for their expertise and collaboration in the construction of the wall specimens.
The first author would also like to acknowledge the Portuguese Science and Technology
Foundation (FCT) for its financial support through grant SFRH / BD / 61908 / 2009
Fail-safe optimization of viscous dampers for seismic retrofitting
This paper presents a new optimization approach for designing minimum-cost
fail-safe distributions of fluid viscous dampers for seismic retrofitting.
Failure is modeled as either complete damage of the dampers or partial
degradation of the dampers' properties. In general, this leads to optimization
problems with large number of constraints. Thus, the use of a working-set
optimization algorithm is proposed. The main idea is to solve a sequence of
relaxed optimization sub-problems with a small sub-set of all constraints. The
algorithm terminates once a solution of a sub-problem is found that satisfies
all the constraints of the problem. The retrofitting cost is minimized with
constraints on the inter-story drifts at the peripheries of frame structures.
The structures considered are subjected to a realistic ensemble of ground
motions, and their response is evaluated with time-history analyses. The
transient optimization problem is efficiently solved with a gradient-based
sequential linear programming algorithm. The gradients of the response
functions are calculated with a consistent adjoint sensitivity analysis
procedure. Promising results attained for 3-D irregular frames are presented
and discussed. The numerical results highlight the fact that the optimized
layout and size of the dampers can change significantly even for moderate
levels of damage
Pushover Analysis for Plan Irregular Building Structures
Nonlinear static procedures (NSPs), also known as "pushover methods", represent the most used tool in the professional practice for assessment of seismic performance of building structures. Most of the methods subscribed by major seismic codes for seismic analysis of new or existing buildings have been originally defined for simple regular structures
- âŠ