The quadrupole resonator: Construction, RF System Field Calculations and First Applications

The quadrupole resonator allows measurement of the RF properties of superconducting (sc) films deposited on disk-shaped metallic substrates. We describe the construction of the apparatus, the brazing and electron-beam welding procedures, the arrangements for compensating mechanical tolerances of samples and for assuring reproducible sample illumination. We explain the special features of the RF sy stem and give the results of field calculations with a 3D cavity code. Finally we present first measurements of Nb on Cu film samples and compare them with calibrations done with a bulk Nb sample

A CVD diamond detector for (n,alpha) cross section measurements

Copyright owned by the author(s) under the terms of the Creative Commons Attribution-NonCommercial-ShareAlike LicenceIn astrophysics, the determination of the optical alpha-nucleus potential for low alpha-particle energies, crucial in understanding the origin of the stable isotopes, has turned out to be a challenge. Theory still cannot predict the optical potentials required for the calculation of the astrophysical reaction rates in the Hauser-Feshbach statistical model and there is scant experimental information on reactions with alpha particles at the relevant astrophysical energies. Measurements of (n,alpha) cross-sections offer a good opportunity to study the alpha channel. At the n_TOF experiment at CERN, a prototype detector, based on the chemical vapor deposition (CVD) diamond technology, has been recently developed for (n,alpha) measurements. A reference measurement of the 10B(n,alpha)7Li reaction was performed in 2011 at n_TOF as a feasibility study for this detector type. The results of this measurement and an outline for future experiments are presented here

Microwave apparatus for gravitational waves observation

In this report the theoretical and experimental activities for the development of superconducting microwave cavities for the detection of gravitational waves are presented.Comment: 42 pages, 28 figure

The LHC superconducting cavities

The LHC RF system, which must handle high intensity (0.5 A d.c.) beams, makes use of superconducting single-cell cavities, best suited to minimizing the effects of periodic transient beam loading. There will be eight cavities per beam, each capable of delivering 2 MV (5 MV/m accelerating field) at 400 MHz. The cavities themselves are now being manufactured by industry, using niobium-on-copper technology which gives full satisfaction at LEP. A cavity unit includes a helium tank (4.5 K operating temperature) built around a cavity cell, RF and HOM couplers and a mechanical tuner, all housed in a modular cryostat. Four-unit modules are ultimately foreseen for the LHC (two per beam), while at present a prototype version with two complete units is being extensively tested. In addition to a detailed description of the cavity and its ancillary equipment, the first test results of the prototype will be reported

The new vertical neutron beam line at the CERN n_TOF facility design and outlook on the performance

At the neutron time-of-flight facility n_TOF at CERN a new vertical beam line was constructed in 2014, in order to extend the experimental possibilities at this facility to an even wider range of challenging cross-section measurements of interest in astrophysics, nuclear technology and medical physics. The design of the beam line and the experimental hall was based on FLUKA Monte Carlo simulations, aiming at maximizing the neutron flux, reducing the beam halo and minimizing the background from neutrons interacting with the collimator or back-scattered in the beam dump. The present paper gives an overview on the design of the beam line and the relevant elements and provides an outlook on the expected performance regarding the neutron beam intensity, shape and energy resolution, as well as the neutron and photon backgrounds

Present Status and Future Programs of the n_TOF Experiment

This is an Open Access article distributed under the terms of the Creative Commons Attribution-Noncommercial License 3.0, which permits unrestricted use, distribution, and reproduction in any noncommercial medium, provided the original work is properly citedThe neutron time-of-flight facility n_TOF at CERN, Switzerland, operational since 2001, delivers neutrons using the Proton Synchrotron (PS) 20 GeV/c proton beam impinging on a lead spallation target. The facility combines a very high instantaneous neutron flux, an excellent time of flight resolution due to the distance between the experimental area and the production target (185 meters), a low intrinsic background and a wide range of neutron energies, from thermal to GeV neutrons. These characteristics provide a unique possibility to perform neutron-induced capture and fission cross-section measurements for applications in nuclear astrophysics and in nuclear reactor technology.The most relevant measurements performed up to now and foreseen for the future will be presented in this contribution. The overall efficiency of the experimental program and the range of possible measurements achievable with the construction of a second experimental area (EAR-2), vertically located 20 m on top of the n_TOF spallation target, might offer a substantial improvement in measurement sensitivities. A feasibility study of the possible realisation of the installation extension will be also presented

Neutron cross-sections for advanced nuclear systems : The n-TOF project at CERN

© Owned by the authors, published by EDP Sciences, 2014 This is an Open Access article distributed under the terms of the Creative Commons Attribution License 4.0, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly citedThe study of neutron-induced reactions is of high relevance in a wide variety of fields, ranging from stellar nucleosynthesis and fundamental nuclear physics to applications of nuclear technology. In nuclear energy, high accuracy neutron data are needed for the development of Generation IV fast reactors and accelerator driven systems, these last aimed specifically at nuclear waste incineration, as well as for research on innovative fuel cycles. In this context, a high luminosity Neutron Time Of Flight facility, n-TOF, is operating at CERN since more than a decade, with the aim of providing new, high accuracy and high resolution neutron cross-sections. Thanks to the features of the neutron beam, a rich experimental program relevant to nuclear technology has been carried out so far. The program will be further expanded in the near future, thanks in particular to a new high-flux experimental area, now under construction.Peer reviewedFinal Published versio

Measurement of the neutron-induced fission cross section of Th 230 at the CERN n_TOF facility

The neutron-induced fission cross section of 230 Th has been measured at the neutron time-of-flight facility n_TOF located at CERN. The experiment was performed at the experimental area EAR-1 with a neutron flight path of 185 m, using Micromegas detectors for the detection of the fission fragments. The 230 Th(n, f ) cross section was determined relative to the 235 U(n, f ) one, covering the energy range from the fission threshold up to 400 MeV. The results from the present work are compared with existing cross-section datasets and the observed discrepancies are discussed and analyzed. Finally, using the code EMPIRE 3.2.3 a theoretical study, based on the statistical model, was performed leading to a satisfactory reproduction of the experimental results with the proper tuning of the respective parameters, while for incident neutron energy beyond 200 MeV the fission of 230 Th was described by Monte Carlo simulations.This project received funding from the Euratom “Support safe operation of nuclear systems” program 2014–2018 under Grant Agreement No. 847552 (SANDA) and by the funding agencies of the participating institutes. This research is imple- mented through the IKY scholarships program and cofinanced by the European Union (European Social Fund ’ESF) and Greek national funds through the action entitled “Reinforce- ment of Postdoctoral Researchers - 2nd call (MIS 5033021)”, in the framework of the Operational Programme “Human Resources Development Program, Education and Lifelong Learning” of the National Strategic Reference Framework.Article signat per 137 autors/es: V. Michalopoulou, A. Stamatopoulos, M. Diakaki, A. Tsinganis, R. Vlastou, M. Kokkoris, N. Patronis, Z. Eleme, D. Macina, L. Tassan-Got, N. Colonna, E. Chiaveri, A. Ventura, P. Schillebeeckx, J. Heyse, G. Sibbens, G. Alaerts, A. Borella, A. Moens, D. Vanleeuw, O. Aberle, V. Alcayne, S. Amaducci, J. Andrzejewski, L. Audouin, V. Babiano-Suarez, M. Bacak, M. Barbagallo, S. Bennett, E. Berthoumieux, J. Billowes, D. Bosnar, A. Brown, M. Busso, M. Caamaño, L. Caballero, F. Calviño, M. Calviani, D. Cano-Ott, A. Casanovas, F. Cerutti, G. Cortés, M. A. Cortés-Giraldo, L. Cosentino, S. Cristallo, L. A. Damone, P. J. Davies, M. Dietz, C. Domingo-Pardo, R. Dressler, Q. Ducasse, E. Dupont, I. Durán, B. Fernández-Domínguez, A. Ferrari, P. Finocchiaro, V. Furman, K. Göbel, R. Garg, A. Gawlik-Ramiega, S. Gilardoni, I. F. Gonçalves, E. González-Romero, C. Guerrero, F. Gunsing, H. Harada, S. Heinitz, D. G. Jenkins, A. Junghans, F. Käppeler, Y. Kadi, A. Kimura, I. Knapová, Y. Kopatch, M. Krticka, D. Kurtulgil, I. Ladarescu, C. Lederer-Woods, H. Leeb, J. Lerendegui-Marco, S. J. Lonsdale, A. Manna, T. Martínez, A. Masi, C. Massimi, P. Mastinu, M. Mastromarco, E. A. Maugeri, A. Mazzone, E. Mendoza, A. Mengoni, P. M. Milazzo, F. Mingrone, J. Moreno-Soto, A. Musumarra, A. Negret, R. Nolte, F. Ogállar, A. Oprea, A. Pavlik, J. Perkowski, C. Petrone, L. Piersanti, E. Pirovano, I. Porras, J. Praena, J. M. Quesada, D. Ramos-Doval, T. Rauscher, R. Reifarth, D. Rochman, Y. Romanets, C. Rubbia, M. Sabaté-Gilarte, A. Saxena, D. Schumann, A. Sekhar, A. G. Smith, N. V. Sosnin, P. Sprung, G. Tagliente, J. L. Tain, A. Tarifeño-Saldivia, Th. Thomas, P. Torres-Sánchez, J. Ulrich, S. Urlass, S. Valenta, G. Vannini, V. Variale, P. Vaz, D. Vescovi, V. Vlachoudis, A. Wallner, P. J. Woods, T. Wright, and P. Žugec.Postprint (published version