51 research outputs found
PdO x /Pd at Work in a Model Three-Way Catalyst for Methane Abatement Monitored by Operando XANES
The oxidation state of palladium in a model Pd/ACZ three-way catalyst was monitored by synchronous XANES and mass spectrometry during two consecutive heating (to 850°C) and cooling (to 100°C) cycles under stoichiometric conditions simulating exhaust after treatment of a natural gas engine. During heating in the first cycle, PdO reduction occurred around 500°C and the initial fully oxidized state of Pd was never recovered upon heating and cooling cycles. A mixed Pd2+/Pd oxidation state was at work in the second cycle. Hence, the operando XANES study reveals that the PdO x /Pd pair exists in a working catalyst but is less active than the catalyst in its initial state of fully oxidized palladium. It is also evident from XANES spectra that ceria-zirconia promotes re-oxidation of metallic Pd, thus reasonably sustaining catalytic activity after exposure to high temperature
Investigations into Ni<sub>5</sub>Ga<sub>3</sub>/SiO<sub>2</sub> intermetallic catalysts for CO2 hydrogenation: synthesis and characterization
Experimental methods in chemical engineering: X âray absorption spectroscopyâ XAS , XANES , EXAFS
Although X-ray absorption spectroscopy (XAS) was conceived in the early 20th century, it took 60 years after the advent of synchrotrons for researchers to exploit its tremendous potential. Counterintuitively, researchers are now developing bench type polychromatic X-ray sources that are less brilliant to measure catalyst stability and work with toxic substances. XAS measures the absorption spectra of electrons that X-rays eject from the tightly bound core electrons to the continuum. The spectrum from 10 to 150 eV (kinetic energy of the photoelectrons) above the chemical potentialâbinding energy of core electronsâidentifies oxidation state and band occupancy (X-ray absorption near edge structure, XANES), while higher energies in the spectrum relate to local atomic structure like coordination number and distance, Debye-Waller factor, and inner potential correction (extended X-ray absorption fine structure, EXAFS). Combining XAS with complementary spectroscopic techniques like Raman, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) elucidates the nature of the chemical bonds at the catalyst surface to better understand reaction mechanisms and intermediates. Because synchrotrons continue to be the light source of choice for most researchers, the number of articles Web of Science indexes per year has grown from 1000 in 1991 to 1700 in 2020. Material scientists and physical chemists publish an order of magnitude articles more than chemical engineers. Based on a bibliometric analysis, the research comprises five clusters centred around: electronic and optical properties, oxidation and hydrogenation catalysis, complementary analytical techniques like FTIR, nanoparticles and electrocatalysis, and iron, metals, and complexes
Experimental methods in chemical engineering: X-rayabsorption spectroscopyâXAS, XANES, EXAFS
Although X-ray absorption spectroscopy (XAS) was conceived in the early 20th century, it took 60âyears after the advent of synchrotrons for researchers to exploit its tremendous potential. Counterintuitively, researchers are now developing bench type polychromatic X-ray sources that are less brilliant to measure catalyst stability and work with toxic substances. XAS measures the absorption spectra of electrons that X-rays eject from the tightly bound core electrons to the continuum. The spectrum from 10 to 150âeV (kinetic energy of the photoelectrons) above the chemical potentialâbinding energy of core electronsâidentifies oxidation state and band occupancy (X-ray absorption near edge structure, XANES), while higher energies in the spectrum relate to local atomic structure like coordination number and distance, Debye-Waller factor, and inner potential correction (extended X-ray absorption fine structure, EXAFS). Combining XAS with complementary spectroscopic techniques like Raman, Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and electron paramagnetic resonance (EPR) elucidates the nature of the chemical bonds at the catalyst surface to better understand reaction mechanisms and intermediates. Because synchrotrons continue to be the light source of choice for most researchers, the number of articles Web of Science indexes per year has grown from 1000 in 1991 to 1700 in 2020. Material scientists and physical chemists publish an order of magnitude articles more than chemical engineers. Based on a bibliometric analysis, the research comprises five clusters centred around: electronic and optical properties, oxidation and hydrogenation catalysis, complementary analytical techniques like FTIR, nanoparticles and electrocatalysis, and iron, metals, and complexes.The authors acknowledge travel support from the Eras-mus+KA107 (2018-1-ES01-KA107-049563) and funding for the open access charge from the Universidad deMĂlaga/CBUA. This work was undertaken, in part,thanks to funding from the Canada Research Chairs pro-gram (950-231476)
PdO x /Pd at Work in a Model Three-Way Catalyst for Methane Abatement Monitored by Operando XANES
Supported molybdenum carbide for higher alcohol synthesis from syngas
Molybdenum carbide supported on active carbon, carbon nanotubes, and titanium dioxide, and promoted by K2CO3, has been prepared and tested for methanol and higher alcohol synthesis from syngas. At optimal conditions, the activity and selectivity to alcohols (methanol and higher alcohols) over supported molybdenum carbide are significantly higher compared to the bulk carbide. The CO conversion reaches a maximum, when about 20 wt% Mo2C is loaded on active carbon. The selectivity to higher alcohols increases with increasing Mo2C loading on active carbon and reaches a maximum over bulk molybdenum carbide, while the selectivity to methanol follows the opposite trend. The effect of Mo2C loading on the alcohol selectivity at a fixed K/Mo molar ratio of 0.14 could be related to the amount of K2CO3 actually on the active Mo2C phase and the size, structure and composition of the supported carbide clusters. Unpromoted, active carbon supported Mo2C exhibits a high activity for CO conversion with hydrocarbons as the dominant products. The K 2CO3 promoter plays an essential role in directing the selectivity to alcohols rather than to hydrocarbons. The optimum selectivity toward higher alcohols and total alcohols is obtained at a K/Mo molar ratio of 0.21 over the active carbon supported Mo2C (20 wt%)
- âŠ