The effects of solvent extraction on nanoporosity of marine-continental coal and mudstone

Coal and organic-rich mudstone develop massive nanopores, which control the storage of adsorbed and free gas, as well as fluid flows. Generation and retention of bitumen and hydrocarbons of oil window reservoirs add more uncertainty to the nanoporosity. Solvent extraction is a traditional way to regain unobstructed pore networks but may cause additional effects due to interactions with rocks, such as solvent adsorbing on clay surfaces or absorbing in kerogens. Selected marine-continental coal and mudstone in Eastern Ordos Basin were studied to investigate how pore structures are affected by these in-situ-sorptive compounds (namely residual bitumen and hydrocarbons) and altered by solvent extractions. Solvent extraction was performed to obtain bitumen-free subsamples. Organic petrology, bulk geochemical analyses and gas chromatography were used to characterize the samples and the extracts. Low-pressure argon and carbon dioxide adsorptions were utilized to characterize the nanopore structures of the samples before and after extraction. The samples, both coal and mudstone, are in oil windows, with vitrinite reflectance ranging from 0.807 to 1.135%. The coals are strongly affected by marine organic input, except for the sample C-4; the mudstones are sourced by either marine or terrestrial organic input, or their mixture. As for the coals affected by marine organic input, residual bitumen and hydrocarbons occupying or blocking pores <10 nm becomes weak with thermal maturation. Bitumen derived from terrestrial organic matter mainly affects small pores, since coal asphaltene molecules are much smaller than petroleum asphaltene molecules. The mudstone M-2 with high extract production showed an increase of nanopores after extraction, due to the exposure of the filled or blocked pores. However, most transitional mudstones saw decreases of the pores because pore shrinkage caused by solvents adsorbing on and swelling clay minerals (mainly kaolinite and illite/smectite mixed layers) counteracts the released pore spaces. Solvent extractions on the coals significantly increased the micropores <0.6 nm, since the heat of sorption of alkanes reaches the peak in the pores within 0.4–0.5 nm. By contrast, solvent extractions on the mudstones decreased the micropores ∼0.35 nm, which is perhaps caused by evaporative drying of solvent displacing residual water in clay

Solution and type curves for the seepage model of the water-bearing coalbed with leakage recharge

To analyze the effects of the leakage recharge of the aquifer on the initial dewatering of coalbed methane wells, the mathematical seepage model of water in the coalbed considering the aquifer leakage was established by using the leakage coefficient according to the unsteady seepage theory. The model was solved after Laplace transform and the Stehfest numerical reverse inversion was used to obtain the solution in right space. Then, the log-log type curves of pressure and pressure derivative were created with new combinations of parameters. Based on the natural seepage mechanism, the influence of aquifer leakage on curve shape was judged. It is found that the radial flow ends earlier as the leakage coefficient increases. Moreover, it was proposed to obtain reservoir permeability, skin factor, and leakage coefficient by using type curve matching. The type curves are useful for quantitatively evaluating the level of leakage, thereby guiding the adjustment of the following production system for CBM wells.Este estudio estableció el modelo matemático de filtración de agua en una capa carbonífera al estimar la salida acuífera con el uso del coeficiente de fuga, de acuerdo con la teoría de filtración inestable, para analizar los efectos en la recarga de pérdida de fluidos de un acuífero en el drenado inicial para pozos de gas metano.  El modelo se resolvió tras usar la transformación Laplace y la inversión numérica Stehfest para encontrar la respuesta en el lugar indicado. Luego, se creó la representación algorítmica de la presión y la presión derivativa con nuevas combinaciones de parámetros. Se evaluó la influencia de la pérdida de fluido del acuífero en la forma de la curva con base al mecanismo físico de filtración. Se estableció que el flujo radial finaliza antes de que el coeficiente de pérdida de fluido se incremente. Además, se propone el uso de la curva tipo correspondiente para obtener la permeabilidad del reservorio, el factor de daño y el coeficiente de pérdida de fluido. Las curvas tipo son útiles para evaluar cuantitativamente el nivel de la pérdida de fluido, y de esta manera guiar el ajuste de un sistema de producción consecuente para pozos de gas metano de carbón

Recombinant Human Endostatin Endostar Inhibits Tumor Growth and Metastasis in a Mouse Xenograft Model of Colon Cancer

To investigate the effects of recombinant human endostatin Endostar on metastasis and angiogenesis and lymphangiogenesis of colorectal cancer cells in a mouse xenograft model. Colon cancer cells SW620 were injected subcutaneously into the left hind flank of nude mice to establish mouse xenograft models. The mice were treated with normal saline or Endostar subcutaneously every other day. The growth and lymph node metastasis of tumor cells, angiogenesis and lymphangiogenesis in tumor tissue were detected. Apoptosis and cell cycle distribution were studied by flow cytometry. The expression of VEGF-A, -C, or -D in SW620 cells was determined by immunoblotting assays. Endostar inhibited tumor growth and the rate of lymph node metastasis (P < 0.01). The density of blood vessels in or around the tumor area was 12.27 ± 1.21 and 22.25 ± 2.69 per field in Endostar-treated mice and controls (P < 0.05), respectively. Endostar also decreased the density of lymphatic vessels in tumor tissues (7.84 ± 0.81 vs. 13.83 ± 1.08, P < 0.05). Endostar suppresses angiogenesis and lymphangiogenesis in the lymph nodes with metastases, simultaneously. The expression of VEGF-A, -C and -D in SW620 cells treated with Endostar was substantially lower than that of controls. Endostar inhibited growth and lymph node metastasis of colon cancer cells by inhibiting angiogenesis and lymphangiogenesis in a mouse xenograft model of colon cancer

Is Current Research on How Climate Change Impacts Global Food Security Really Objective?

Global food insecurity is becoming more severe under the threat of rising global carbon dioxide concentrations, increasing population, and shrinking farmlands and their degeneration. We acquired the ISI Web of Science platform for over 31 years (1988-2018) to review the research on how climate change impacts global food security, and then performed cluster analysis and research hotspot analysis with VosViewer software. We found there were two drawbacks that exist in the current research. Firstly, current field research data were defective because they were collected from various facilities and were hard to integrate. The other drawback is the representativeness of field research site selection as most studies were carried out in developed countries and very few in developing countries. Therefore, more attention should be paid to developing countries, especially some African and Asian countries. At the same time, new modified mathematical models should be utilized to process and integrate the data from various facilities and regions. Finally, we suggested that governments and organizations across the world should be united to wrestle with the impact of climate change on food security.</p

Data from: Posterior predictive Bayesian phylogenetic model selection

We present two distinctly different posterior predictive approaches to Bayesian phylogenetic model selection, and illustrate these methods using examples from green algal protein-coding cpDNA sequences and flowering plant rDNA sequences. The Gelfand-Ghosh (GG) approach allows dissection of an overall measure of model fit into components due to posterior predictive variance (Pm) and goodness-of-fit (Gm), which distinguishes this method from the posterior predictive P-value approach. The conditional predictive ordinate (CPO) method provides a site-specific measure of model fit useful for exploratory analyses and can be combined over sites yielding the log pseudomarginal likelihood (LPML), which is useful as an overall measure of model fit. CPO provides a useful cross-validation approach that is computationally efficient, requiring only a sample from the posterior distribution (no additional simulation is required). Both GG and CPO add new perspectives to Bayesian phylogenetic model selection based on the predictive abilities of models, and complement the perspective provided by the marginal likelihood (including Bayes Factor comparisons) based solely on the fit of competing models to observed data

Solution and type curves for the seepage model of the water-bearing coalbed with leakage recharge

To analyze the effects of the leakage recharge of the aquifer on the initial dewatering of coalbed methane wells, the mathematical seepage model of water in the coalbed considering the aquifer leakage was established by using the leakage coefficient according to the unsteady seepage theory. The model was solved after Laplace transform and the Stehfest numerical reverse inversion was used to obtain the solution in right space. Then, the log-log type curves of pressure and pressure derivative were created with new combinations of parameters. Based on the natural seepage mechanism, the influence of aquifer leakage on curve shape was judged. It is found that the radial flow ends earlier as the leakage coefficient increases. Moreover, it was proposed to obtain reservoir permeability, skin factor, and leakage coefficient by using type curve matching. The type curves are useful for quantitatively evaluating the level of leakage, thereby guiding the adjustment of the following production system for CBM wells

The pilot appraisal of acid fracturing of coalbed methane reservoir in southeast Qinshui Basin, China

The reserves of Coalbed Methane (CBM) in Qinshui Basin are quite promising, but the outputs from CBM wells are quite small even after massive hydraulic fracturing. Herein the fracture system with #3 and #15 coal seams in Qinshui basin was analyzed, and it was found that both of the macro-scale fractures and micro-scale fractures are filled with clay and carbonate minerals, which explains the low productivity of CBM wells after conventional hydraulic fracturing. Acid fracturing has long been an effective method for carbonate gas reservoir to improve the gas well production. However, there were few reports about the application of acid fracturing in coal bed methane field. Based on the mineral identification and acid sensitivity test, the feasibility of acid fracturing demonstrated that the acid does more help than damage to increase the permeability of coal seams in Qinshui basin. Onsite operations have shown that acid fracturing is applicable for the CBM wells in Jincheng Mining Area. It was also observed from the microseismic survey that when applying the acid fracturing treatment, the stimulated reservoir area depends on the acid volume pumped in the first stage, which is crucial to the success of the stimulation.  Evaluación piloto de fractura ácida en depósitos de gas metano de carbón en el suroeste de la cuenca Qinshui, China    Resumen Las reservas de gas metano de carbón (CBM, del inglés Coalbed Methane) en la cuenca Qinshui son más que prometedoras, pero la producción en los pozos es muy pequeña, incluso después de fracturas hidráulicas masivas. En este trabajo se analizaron los sistemas de fractura de las vetas de carbón #3 y #15 de la cuenca Qinshui y se encontró que tanto las fracturas a macroescala como aquellas a microescala están cubiertas con arcillas y minerales carbonatos, lo que explica la baja productividad de los pozos de gas metano de carbón después de la fractura hidráulica convencional. La fractura ácida ha sido un método efectivo en los depósitos de gas carbonato para mejorar la producción en el pozo de gas. Sin embargo, existen pocos informes sobre la aplicación de la fractura ácida en el campo del gas metano de carbón. De acuerdo con la identificación mineral y las pruebas de sensibilidad ácida, la factibilidad de la fractura ácida demostró que el ácido es reparador en el incremento de la permeabilidad en las vetas de carbón de la cuenca Qinshui. Las operaciones in situ han demostrado que la fractura ácida es aplicable para los pozos de gas metano de carbón en el área minera de Jincheng. También se observó en el sondeo microsísmico que cuando se aplica un tratamiento de fractura ácida, el área del depósito estimulada depende del volumen de ácido bombeado en primera instancia, lo que es determinante en el éxito de la estimulación

Nitrosamines and Polycyclic Aromatic Hydrocarbons in Smoke-Cured Bacon (Larou) of Artisanal and Industrial Origin

The aim of this study was to compare the nitrosamines (NAs) and polycyclic aromatic hydrocarbons (PAHs) of Chinese smoke-cured bacon (Larou) of artisanal and industrial origin. The results showed that the average pH and Aw values of family-made Larou products were lower than those of industrial Larou, which was opposite to the TBARS level. The contents of residual nitrite and PAH4 in two artisanal Larou were significantly higher than those of the other groups (p &lt; 0.05). The highest NA content (10.78 μg/kg) was found in family-made Larou. A correlation analysis indicated that the relationships between residual nitrite contents and total PAH8 contents (τ = 0.692, p &lt; 0.01) and total NAs contents (τ = 0.805, p &lt; 0.01) were characterized with a positive correlation. A principal component analysis indicated that the Larou from the industrial sources had similar safety attributes, and was more stable than the Larou processed in an artisanal manner. Our data suggest that Larou produced in industrial conditions is suitable for consumption