129 research outputs found
Using heterogeneous satellites for passive detection of moving aerial target
Passive detection of a moving aerial target is critical for intelligent surveillance. Its implementation can use signals transmitted from satellites. Nowadays, various types of satellites co-exist which can be used for passive detection. As a result, a satellite signal receiver may receive signals from multiple heterogeneous satellites, causing difficult in echo signal detection. In this paper, a passive moving aerial target detection method leveraging signals from multiple heterogeneous satellites is proposed. In the proposed method, a plurality of direct wave signals is separated in a reference channel first. Then, an adaptive filter with normalized least-mean-square (NLMS) is adopted to suppress direct-path interference (DPI) and multi-path interference (MPI) in a surveillance channel. Next, the maximum values of the cross ambiguity function (CAF) and the fourth order cyclic cumulants cross ambiguity function (FOCCCAF) correspond into each separated direct wave signal and echo signal will be utilized as the detection statistic of each distributed sensor. Finally, final detection probabilities are calculated by decision fusion based on results from distributed sensors. To evaluate the performance of the proposed method, extensive simulation studies are conducted. The corresponding simulation results show that the proposed fusion detection method can significantly improve the reliability of moving aerial target detection using multiple heterogeneous satellites. Moveover, we also show that the proposed detection method is able to significantly improve the detection performance by using multiple collaborative heterogeneous satellites
Passive detection of moving aerial target based on multiple collaborative GPS satellites
Passive localization is an important part of intelligent surveillance in security and emergency applications. Nowadays, Global Navigation Satellite Systems (GNSSs) have been widely deployed. As a result, the satellite signal receiver may receive multiple GPS signals simultaneously, incurring echo signal detection failure. Therefore, in this paper, a passive method leveraging signals from multiple GPS satellites is proposed for moving aerial target detection. In passive detection, the first challenge is the interference caused by multiple GPS signals transmitted upon the same spectrum resources. To address this issue, successive interference cancellation (SIC) is utilized to separate and reconstruct multiple GPS signals on the reference channel. Moreover, on the monitoring channel, direct wave and multi-path interference are eliminated by extensive cancellation algorithm (ECA). After interference from multiple GPS signals is suppressed, the cycle cross ambiguity function (CCAF) of the signal on the monitoring channel is calculated and coordinate transformation method is adopted to map multiple groups of different time delay-Doppler spectrum into the distance−velocity spectrum. The detection statistics are calculated by the superposition of multiple groups of distance-velocity spectrum. Finally, the echo signal is detected based on a properly defined adaptive detection threshold. Simulation results demonstrate the effectiveness of our proposed method. They show that the detection probability of our proposed method can reach 99%, when the echo signal signal-to-noise ratio (SNR) is only −64 dB. Moreover, our proposed method can achieve 5 dB improvement over the detection method using a single GPS satellite
Signal estimation in cognitive satellite networks for satellite-based industrial internet of things
Satellite industrial Internet of Things (IIoT) plays an important role in industrial manufactures without requiring the support of terrestrial infrastructures. However, due to the scarcity of spectrum resources, existing satellite frequency bands cannot satisfy the demand of IIoT, which have to explore other available spectrum resources. Cognitive satellite networks are promising technologies and have the potential to alleviate the shortage of spectrum resources and enhance spectrum efficiency by sharing both spectral and spatial degrees of freedom. For effective signal estimations, multiple features of wireless signals are needed at receivers, the transmissions of which may cause considerable overhead. To mitigate the overhead, part of parameters, such as modulation order, constellation type, and signal to noise ratio (SNR), could be obtained at receivers through signal estimation rather than transmissions from transmitters to receivers. In this article, a grid method is utilized to process the constellation map to obtain its equivalent probability density function. Then, binary feature matrix of the probability density function is employed to construct a cost function to estimate the modulation order and constellation type for multiple quadrature amplitude modulation (MQAM) signal. Finally, an improved M 2 M ∞ method is adopted to realize the SNR estimation of MQAM. Simulation results show that the proposed method is able to accurately estimate the modulation order, constellation type, and SNR of MQAM signal, and these features are extremely useful in satellite-based IIoT
Spatial Parameter Identification for MIMO Systems in the Presence of Non-Gaussian Interference
Reliable identification of spatial parameters for multiple-input multiple-output (MIMO) systems, such as the number of transmit antennas (NTA) and the direction of arrival (DOA), is a prerequisite for MIMO signal separation and detection. Most existing parameter estimation methods for MIMO systems only consider a single parameter in Gaussian noise. This paper develops a reliable identification scheme based on generalized multi-antenna time-frequency distribution (GMTFD) for MIMO systems with non-Gaussian interference and Gaussian noise. First, a new generalized correlation matrix is introduced to construct a generalized MTFD matrix. Then, the covariance matrix based on time-frequency distribution (CM-TF) is characterized by using the diagonal entries from the auto-source signal components and the non-diagonal entries from the cross-source signal components in the generalized MTFD matrix. Finally, by making use of the CM-TF, the Gerschgorin disk criterion is modified to estimate NTA, and the multiple signal classification (MUSIC) is exploited to estimate DOA for MIMO system. Simulation results indicate that the proposed scheme based on GMTFD has good robustness to non-Gaussian interference without prior information and that it can achieve high estimation accuracy and resolution at low and medium signal-to-noise ratios (SNRs)
Attacking Modulation Recognition With Adversarial Federated Learning in Cognitive Radio-Enabled IoT
Internet of Things (IoT) based on cognitive radio (CR) exhibits strong dynamic sensing and intelligent decision-making capabilities by effectively utilizing spectrum resources. The federal learning (FL) framework based modulation recognition (MR) is an essential component, but its use of uninterpretable deep learning (DL) introduces security risks. This paper combines traditional signal interference methods and data poisoning in FL to propose a new adversarial attack approach. The poisoning attack in distributed frameworks manipulates the global model by controlling malicious users, which is not only covert but also highly impactful. The carefully designed pseudo-noise in MR is also extremely difficult to detect. The combination of these two techniques can generate a greater security threat. We have further advanced our proposal with the introduction of the new adversarial attack method called "Chaotic Poisoning Attack" to reduce the recognition accuracy of the FL-based MR system. We establish effective attack conditions, and simulation results demonstrate that our method can cause a decrease of approximately 80% in the accuracy of the local model under weak perturbations and a decrease of around 20% in the accuracy of the global model. Compared to white-box attack methods, our method exhibits superior performance and transferability
Automatic Identification of Space-Time Block Coding for MIMO-OFDM Systems in the Presence of Impulsive Interference
Signal identification, a vital task of intelligent communication radios, finds its applications in various military and civil communication systems. Previous works on identification for space-time block codes (STBC) of multiple-input multiple-output (MIMO) system employing orthogonal frequency division multiplexing (OFDM) are limited to additive white Gaussian noise. In this paper, we develop a novel automatic identification algorithm to exploit the generalized cross-correntropy function of the received signals to classify STBC-OFDM signals in the presence of Gaussian noise and impulsive interference. This algorithm first introduces the generalized cross-correntropy function to fully utilize the space-time redundancy of STBC-OFDM signals. The strongly-distinguishable discriminating matrix is then constructed by using the generalized cross-correntropy for multiple receive antennas. Finally, a decision tree identification algorithm is employed to identify the STBC-OFDM signals which is extended by the binary hypothesis test. The proposed algorithm avoids the traditionally required pre-processing tasks, such as channel coefficient estimation, noise and interference statistics prediction and modulation type recognition. Numerical results are presented to show that the proposed scheme provides good identification performance by exploiting the generalized cross-correntropy function of STBC-OFDM signals under impulsive interference circumstances
Robust Blind Equalization for NB-IoT Driven by QAM Signals
The expansion of data coverage and the accuracy of decoding of the narrowband-internet of things (NB-IOT) mainly depend on the quality of channel equalizers. Without using training sequences, blind equalization is an effective method to overcome adverse effects in the internet of things (IoT). The constant modulus algorithm (CMA) has become a favorite blind equalization algorithm due to its least mean square (LMS)-like complexity and desirable robustness property. However, the transmission of high-order quadrature amplitude modulation (QAM) signals in the IoT can degrade its performance and the convergence speed. This paper investigates a family of modified constant modulus algorithms for blind equalization of IoT using high-order QAM. Our theoretical analysis for the first time illustrates that the classical CMA has the problem of artificial error using high-order QAM signals. In order to effectively deal with these issues, a modified constant modulus algorithm (MCMA) is proposed to decrease the modulus matched error, which can efficiently suppress the artificial error and misadjustment at the expense of reduced sample usage rate. Moreover, a generalized form of the MCMA (GMCMA) is developed to improve the sample usage rate and guarantee the desirable equalization performance. Two modified Newton methods (MNMs) for the proposed MCMA and GMCMA are constructed to obtain the optimal equalizer. Theoretical proofs are presented to show the fast convergence speed of the two MNMs. Numerical results show that our methods outperform other methods in terms of equalization performance and convergence speed
Multi-Antenna Spectrum Sensing With Alpha-Stable Noise for Cognitive Radio-Enabled IoT
Cognitive radio-enabled Internet of Things (CR-IoT) is considered as a promising technology to handle spectrum scarcity for IoT applications. Spectrum sensing enables unlicensed secondary users to exploit spectrum holes under the condition of avoiding interference with primary users in CR-IoT networks. Previous studies often assume that the noise is Gaussian while ignoring the influence of non-Gaussian noise. Moreover, multi-antenna-based spectrum sensing algorithms only consider the partial information of covariance matrix. This paper develops two multi-antenna-based spectrum sensing schemes, using fractional low-order covariance matrices to address the issue of performance degradation in impulsive noise. Specifically, the first scheme, namely, diagonal element weighting detection, exploits the diagonal element weighting of the fractional low-order covariance matrix. The latter scheme is called off-diagonal element weighting detection, which adopts the diagonal matrix weighting strategy that exploits the off-diagonal elements of fractional low-order covariance matrices. The approximate analytical expressions of the false alarm probability and detection probability are derived. These developed schemes do not employ any priori knowledge of the primary user signal. Simulation results indicate that two proposed schemes achieve acceptable performance and are robust to the characteristic exponent of the alpha-stable noise, e.g., these proposed methods could achieve a detection probability of 90% with a false alarm probability of 0.1 at GSNR = -16dB, respectively
Multiuser adversarial attack on deep learning for OFDM detection
Adversarial attack has been widely used to degrade the performance of deep learning (DL), especially in the field of communications. In this letter, we evaluate different white-box and black-box adversarial attack algorithms for a DL-based multiuser orthogonal frequency division multiplexing (OFDM) detector subject to multiuser adversarial attack. The bit error rates under different adversarial attacks are compared. The results show that, the perturbation efficiency of adversarial attack is higher than conventional multiuser interference. Virtual adversarial methods (VAM) and zeroth-order-optimization (ZOO) attacks perform the best among white-box and black-box methods, respectively. They are also effective when the attack changes the starting time. Additionally, adding the number of attackers is found useful to improve the VAM attack but not for ZOO. This work shows that adversarial attack is powerful to generate adversarial against multiuser OFDM communications
- …