3,823 research outputs found
Does PPP hold for Big Mac price or consumer price index? Evidence from panel cointegration
This paper examines the validity of purchasing power parity (PPP) using CPI and Big Mac prices. The benchmark model, i.e., the OLS method, which does not take nonstationarity into account, rejects the hypothesis of PPP regardless of prices used. We next use the panel cointegration method to consider the nonstationary nature of variables. Estimated results for CPI are mixed. The PPP is rejected when the nominal exchange rate is employed as the dependent variable but is not rejected when the price ratio is used as the dependent variable. By contrast, the PPP is overwhelmingly not rejected when the Big Mac price is used. Last, we remove the production bias and re-examine the same issue by using panel cointegration. The PPP is again decisively rejected when CPI price is used but not for Big Mac price. Accordingly, Big Mac price is more supportive to the validity of PPP than CPI price.Big Mac
Seeing visual word forms: Spatial summation, eccentricity and spatial configuration
AbstractWe investigated observers’ performance in detecting and discriminating visual word forms as a function of target size and retinal eccentricity. The contrast threshold of visual words was measured with a spatial two-alternative forced-choice paradigm and a PSI adaptive method. The observers were to indicate which of two sides contained a stimulus in the detection task, and which contained a real character (as opposed to a pseudo- or non-character) in the discrimination task. When the target size was sufficiently small, the detection threshold of a character decreased as its size increased, with a slope of −1/2 on log–log coordinates, up to a critical size at all eccentricities and for all stimulus types. The discrimination threshold decreased with target size with a slope of −1 up to a critical size that was dependent on stimulus type and eccentricity. Beyond that size, the threshold decreased with a slope of −1/2 on log–log coordinates before leveling out. The data was well fit by a spatial summation model that contains local receptive fields (RFs) and a summation across these filters within an attention window. Our result implies that detection is mediated by local RFs smaller than any tested stimuli and thus detection performance is dominated by summation across receptive fields. On the other hand, discrimination is dominated by a summation within a local RF in the fovea but a cross RF summation in the periphery
Electro-optic resonant phase modulator
An electro-optic resonant cavity is used to achieve phase modulation with lower driving voltages. Laser damage thresholds are inherently higher than with previously used integrated optics due to the utilization of bulk optics. Phase modulation is achieved at higher speeds with lower driving voltages than previously obtained with non-resonant electro-optic phase modulators. The instant scheme uses a data locking dither approach as opposed to the conventional sinusoidal locking schemes. In accordance with a disclosed embodiment, a resonant cavity modulator has been designed to operate at a data rate in excess of 100 megabits per sec. By carefully choosing the cavity finesse and its dimension, it is possible to control the pulse switching time to within 4 nano-sec. and to limit the required switching voltage to within 10 V. This cavity locking scheme can be applied by using only the random data sequence, and without the need of dithering of the cavity. Compared to waveguide modulators, the resonant cavity has a comparable modulating voltage requirement. Because of its bulk geometry, the resonant cavity modulator has the potential of accommodating higher throughput power. Mode matching into the bulk device is easier and typically can be achieved with higher efficiency. An additional control loop is incorporated into the modulator to maintain the cavity on resonance
Simplified Optics and Controls for Laser Communications
A document discusses an architecture of a spaceborne laser communication system that provides for a simplified control subsystem that stabilizes the line of sight in a desired direction. Heretofore, a typical design for a spaceborne laser communication system has called for a high-bandwidth control loop, a steering mirror and associated optics, and a fast steering-mirror actuator to stabilize the line of sight in the presence of vibrations. In the present architecture, the need for this fast steering-mirror subsystem is eliminated by mounting the laser-communication optics on a disturbance-free platform (DFP) that suppresses coupling of vibrations to the optics by 60 dB. Taking advantage of microgravitation, in the DFP, the optical assembly is free-flying relative to the rest of the spacecraft, and a low-spring-constant pointing control subsystem exerts small forces to regulate the position and orientation of the optics via voice coils. All steering is effected via the DFP, which can be controlled in all six degrees of freedom relative to the spacecraft. A second control loop, closed around a position sensor and the spacecraft attitude-control system, moves the spacecraft as needed to prevent mechanical contact with the optical assembly
Antibacterial effect of water-soluble chitosan on representative dental pathogens Streptococcus mutans and Lactobacilli brevis
Dental caries is still a major oral health problem in most industrialized countries. The development of dental caries primarily involves Lactobacilli spp. and Streptococcus mutans. Although antibacterial ingredients are used against oral bacteria to reduce dental caries, some reports that show partial antibacterial ingredients could result in side effects. OBJECTIVES: The main objective is to test the antibacterial effect of water-soluble chitosan while the evaluation of the mouthwash appears as a secondary aim. MATERIAL AND METHODS: The chitosan was obtained from the Application Chemistry Company (Taiwan). The authors investigated the antibacterial effects of water-soluble chitosan against oral bacteria at different temperatures (25-37ºC) and pH values (pH 5-8), and evaluated the antibacterial activities of a self-made water-soluble chitosan-containing mouthwash by in vitro and in vivo experiments, and analyzed the acute toxicity of the mouthwashes. The acute toxicity was analyzed with the pollen tube growth (PTG) test. The growth inhibition values against the logarithmic scale of the test concentrations produced a concentrationresponse curve. The IC50 value was calculated by interpolation from the data. RESULTS: The effect of the pH variation (5-8) on the antibacterial activity of water-soluble chitosan against tested oral bacteria was not significant. The maximal antibacterial activity of water-soluble chitosan occurred at 37ºC. The minimum bactericidal concentration (MBC) of water-soluble chitosan on Streptococcus mutans and Lactobacilli brevis were 400 µg/mL and 500 µg/mL, respectively. Only 5 s of contact between water-soluble chitosan and oral bacteria attained at least 99.60% antibacterial activity at a concentration of 500 µg/mL. The water-soluble chitosan-containing mouthwash significantly demonstrated antibacterial activity that was similar to that of commercial mouthwashes (>;99.91%) in both in vitro and in vivo experiments. In addition, the alcohol-free mouthwash exhibited no cytotoxicity and no oral stinging. To the best of our knowledge, this was the first study to combine in vitro and in vivo investigations to analyze the antibacterial properties of water-soluble chitosan-containing mouthwash. CONCLUSIONS: This study illustrated that water-soluble chitosan may be a viable alternative to commercial mouthwashes in the future
iPDA: integrated protein disorder analyzer
This article presents a web server iPDA, which aims at identifying the disordered regions of a query protein. Automatic prediction of disordered regions from protein sequences is an important problem in the study of structural biology. The proposed classifier DisPSSMP2 is different from several existing disorder predictors by its employment of position-specific scoring matrices with respect to physicochemical properties (PSSMP), where the physicochemical properties adopted here especially take the disorder propensity of amino acids into account. The web server iPDA integrates DisPSSMP2 with several other sequence predictors in order to investigate the functional role of the detected disordered region. The predicted information includes sequence conservation, secondary structure, sequence complexity and hydrophobic clusters. According to the proportion of the secondary structure elements predicted, iPDA dynamically adjusts the cutting threshold of determining protein disorder. Furthermore, a pattern mining package for detecting sequence conservation is embedded in iPDA for discovering potential binding regions of the query protein, which is really helpful to uncovering the relationship between protein function and its primary sequence. The web service is available at http://biominer.bime.ntu.edu.tw/ipda and mirrored at http://biominer.cse.yzu.edu.tw/ipda
Recommended from our members
Symmetry: Modeling the Effects of Masking Noise, Axial Cueing and Salience
Symmetry detection is an interesting probe of pattern processing because it requires the matching of novel patterns without the benefit of prior recognition. However, there is evidence that prior knowledge of the axis location plays an important role in symmetry detection. We investigated how the prior information about the symmetry axis affects symmetry detection under noise-masking conditions. The target stimuli were random-dot displays structured to be symmetric about vertical, horizontal, or diagonal axes and viewed through eight apertures (1.2° diameter) evenly distributed around a 6° diameter circle. The information about axis orientation was manipulated by (1) cueing of axis orientation before the trial and (2) varying axis salience by including or excluding the axis region within the noise apertures. The percentage of correct detection of the symmetry was measured at for a range of both target and masking noise densities. The threshold vs. noise density function was flat at low noise density and increased with a slope of 0.75–0.8 beyond a critical density. Axis cueing reduced the target threshold 2–4fold at all noise densities while axis salience had an effect only at high noise density. Our results are inconsistent with an ideal observer or signal-to-noise account of symmetry detection but can be explained by a multiple-channel model is which the response in each channel is the ratio between the nonlinear transform of the responses of sets of early symmetry detectors and the sum of external and intrinsic sources of noise
Electric-optic resonant phase modulator
An electro-optic resonant cavity is used to achieve phase modulation with lower driving voltages. Laser damage thresholds are inherently higher than with previously used integrated optics due to the utilization of bulk optics. Phase modulation is achieved at higher speeds with lower driving voltages than previously obtained with non-resonant electro-optic phase modulators. The instant scheme uses a data locking dither approach as opposed to the conventional sinusoidal locking schemes. In accordance with a disclosed embodiment, a resonant cavity modulator has been designed to operate at a data rate in excess of 100 Mbps. By carefully choosing the cavity finesse and its dimension, it is possible to control the pulse switching time to within 4 ns and to limit the required switching voltage to within 10 V. Experimentally, the resonant cavity can be maintained on resonance with respect to the input laser signal by monitoring the fluctuation of output intensity as the cavity is switched. This cavity locking scheme can be applied by using only the random data sequence, and without the need of additional dithering of the cavity. Compared to waveguide modulators, the resonant cavity has a comparable modulating voltage requirement. Because of its bulk geometry, resonant cavity modulator has the potential of accommodating higher throughput power. Furthermore, mode matching into a bulk device is easier and typically can be achieved with higher efficiency. On the other hand, unlike waveguide modulators which are essentially traveling wave devices, the resonant cavity modulator requires that the cavity be maintained in resonance with respect to the incoming laser signal. An additional control loop is incorporated into the modulator to maintain the cavity on resonance
- …